Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Apem Components 5GSH93529 keypad switch features a POLYPHENYLENE SULPHIDE housing, COPPER TIN ALLOY terminals, and GREEN LED illumination. With an electrical life of 10M cycles, it is ideal for applications requiring a durable and reliable SPST switch with IP67 sealing. Suitable for use in environments with temperatures ranging from -30 to 85°C.
Median Price
$3.183
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
VNN
Aztec Data Supply Inc.
$1.580
Continental Prestige Electronics
$3.119
Argo Parts USA
Netroflash
AZTECH Wire
$17.923
POLYPHENYLENE SULPHIDE - Provides durability and resistance to harsh environments, making it a reliable choice.
COPPER TIN ALLOY - Ensures excellent conductivity and longevity, maintaining consistent performance over time.
10000000 Cycle(s) - With a high cycle rating, this keypad switch is built to last and withstand frequent use.
GREEN LED - Offers clear visibility in low-light conditions, enhancing user experience and ease of operation.
10000000 ohm - Provides reliable electrical insulation for safety and stable performance.
10 inch - Offers a compact yet ergonomic design for comfortable usage and easy installation.
IP67 - Ensures protection against dust and water, making it suitable for outdoor or industrial applications.
SPST - Provides simple on/off operation, ideal for basic control applications.
SILVER - Delivers low resistance and corrosion resistance, ensuring reliable electrical connections.
POLYPHENYLENE SULPHIDE - Offers insulation properties to prevent electrical interference and maintain signal integrity.
Keypad Switches 5GSH93529 attributes and parameters. Explore more Keypad Switches devices from Apem Components
Material (Actuator):
Actuator Travel (mm):
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
Center Contact Material:
Center Contact Plating:
Circuit Config:
Maximum Contact Bounce Time:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Contact Resistance:
Maximum DC Contact Voltage:
Electrical Life:
End Contact Material:
End Contact Plating:
Housing Material:
Illumination:
Insulation Resistance:
Insulator Material:
Mounting Feature:
No. of Switches:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Terminal Material:
Termination Type:
5GSH93529 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.40
SB
HMI is a quickly changing sector in which APEM continues to strengthen its leadership. Since 1952, APEM has been developing and marketing an extensive portfolio of human-machine interfaces. Today, we are able to produce more than 50,000 distinct part numbers. Our offer is continuously evolving to always respect the applicable standards and anticipate the challenges of our customers and the markets in which they operate. If APEM's activity was initially focused on switches, it has diversified over the years. Switches and buttons of all types, LED indicators, joysticks of all sizes, keyboards and integrated solutions, our group has integrated many different types of know-how and is now able to offer its expertise to thousands of customers around the world. We control all phases, from product development to manufacturing, thanks to our vertical integration of production and our mastery of advanced technologies. This enables us to respond effectively to the most complex specifications. We not only have the necessary know-how, but also the right equipment and personnel. We recruit and train our teams to always offer the best product-service combination to each of our customers.
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
Weitronic Enterprise
KSS321GLFS
C & K Components
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): LARGE TYPE; Solderability: REFLOW; Maximum Operating Force: 2 N;
PTS647SK70SMTR2LFS
PTS647SK70SMTR2LFS by C & K Components is a SPST Keypad Switch with 100000 cycles Electrical Life and 100000000 ohm Insulation Resistance. With a max operating temperature of 70°C, it's ideal for applications requiring a momentary-tactile switch function in surface mount-straight mounting configurations.
B3F-5001
Omron
Omron B3F-5001 Keypad Switch features SPST switch function, 10000000 cycle electrical life, and 100000000 ohm insulation resistance. Ideal for applications requiring momentary-tactile switch action with a max operating force of 1.76 N.
B3W-9000-RG2N
Omron B3W-9000-RG2N keypad switch offers 1000000 cycles electrical life with GREEN AND RED LED illumination. With SPST switch function and 1.57N max operating force, it is ideal for applications requiring momentary-tactile action. Featuring IP00 sealing and 10mm body length, it suits various industries with -25 to 70°C temp range.
EVQQ2K03W
Panasonic
The Panasonic EVQQ2K03W is a white keypad switch with stainless steel housing. It offers 1000000 cycles electrical life, 100000000 ohm insulation resistance, and 0.254mm actuator travel. Ideal for applications requiring momentary ON-OFF contact function with 1X1 circuit config and snap action timing.
EVPANDE1A
KEYPAD SWITCH; Manufacturer Series: EVPAN;
430453025836
Wuerth Elektronik & Kg
430453025836 by Wuerth Elektronik & Kg is a SALMON Keypad Switch with STAINLESS STEEL housing. It has SPST switch function, 200000 cycle electrical life, and 100000000 ohm insulation resistance. Ideal for applications requiring a MOMENTARY KEYPAD SWITCH with 0.25mm actuator travel and max operating force of 4.02N.
RKB2SJK250SMTRLFS
KEYPAD SWITCH;
EDM450SSCLFS
EDM450SSCLFS by C & K Components is a SPST keypad switch with 1000000 cycle electrical life, 1VA@100VDC DC max power rating, and 1000000000 ohm insulation resistance. Ideal for applications requiring momentary-tactile switch action in environments with temperatures ranging from -25 to 70 °C.
DTSA-62N-V
Apem Components
The Apem Components DTSA-62N-V is a SPST keypad switch with 200000 cycles electrical life. With a body width of 7.1882 inch and body height of 6.5532 mm, it is ideal for applications requiring momentary-tactile switch action. This through hole-right angle mounted switch has a max operating force of 2.06 N and operates at temperatures ranging from -25 to 70 °C, making it suitable for various electronic devices.
1241.1102.7097
Schurter Ag
Schurter Ag's 1241.1102.7097 Keypad Switch features POLYSULFONE housing, SPST switch function, and IP65 sealing. With a DC Max Power Rating of 0.36VA@24VDC, it is ideal for panel mount applications requiring a durable and reliable keypad switch with a long electrical life of 1000000 cycles.
TL1105SPF160Q1RWHT
E-switch
TL1105SPF160Q1RWHT by E-switch is a SPST Keypad Switch with SILVER plating, 100000 cycle Electrical Life, and 100000000 ohm Insulation Resistance. Ideal for applications requiring a momentary-tactile switch action, it has a max operating force of 2.06N and operates b/w -20 to 70°C temperatures.
B32-1310
Omron B32-1310 Keypad Switch features SPST switch function, 70°C max operating temp, -25°C min operating temp. Ideal for through-hole mounting applications with solder termination.
KT11P2JM34LFS
KT11P2JM34LFS by C & K Components is a SPST Keypad Switch with SILVER plating. It has an Electrical Life of 100000 cycles, DC Max Power Rating of 1VA@32VDC, and Insulation Resistance of 1000000000 ohm. Ideal for applications requiring a MOMENTARY-TACTILE switch action in harsh environments due to its IP57 sealing and MIL-STD solderability.
MCSLPT4848A5DTR
TE Connectivity
TE Connectivity's MCSLPT4848A5DTR is a SPST Keypad Switch with 200000 cycles Electrical Life. It features POLYETHYLENE Housing, COPPER ALLOY Terminals, and STAINLESS STEEL End Contacts. Ideal for PANEL MOUNT applications, it has an Operating Temperature range of -30 to 80 °C and supports DC Current up to 0.05 A at 12V.
1-1825910-8
Tyco Electronics Alcoswitch
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Minimum Operating Temperature: -35 Cel; Body Height: 3.61 mm; Maximum Operating Temperature: 85 Cel;
KSC421J70SHLFS
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): SOFT TYPE; Solderability: REFLOW; Terminal Material: SILVER;
TL2243AF160Q
TL2243AF160Q by E-switch is a SPST keypad switch with 30000 cycles electrical life and 100000000 ohm insulation resistance. It has a max operating force of 2.06N, ideal for applications requiring momentary-tactile switch action such as consumer electronics and industrial control panels.
B3U-1000PM
Omron B3U-1000PM is a black keypad switch with 200000 cycles electrical life. It has SPST switch function, 1.5N max operating force, and -25 to 70°C temp range. Ideal for applications requiring momentary-tactile action, such as consumer electronics or industrial control panels.
TE Connectivity 1-1825910-8 is a SPST Keypad Switch with IVORY actuator color and NYLON housing. It has an electrical life of 100,000 cycles, operates b/w -35 to 85°C, and supports 0.05A@24VDC DC max rating R load. Ideal for panel mounting applications requiring momentary switch action.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5GSH93561
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Additional Features: STANDARD: MIL-PRF-28855H; Material (Actuator): POLYPHENYLENE SULPHIDE; Actuator Travel (mm): 1;
5GSH9358222
5GSH9358222 by Apem Components is a keypad switch with POLYPHENYLENE SULPHIDE housing, COPPER TIN ALLOY terminals, and RED/GREEN LED illumination. It has an electrical life of 10M cycles, IP67 sealing, and operates b/w -30 to 85 °C. Ideal for applications requiring a SPST switch with momentary-tactile action and surface mount-straight mounting feature.
5GSH93501
The Apem Components 5GSH93501 keypad switch features a PPS housing, blue LED illumination, and IP67 sealing. With an electrical life of 10M cycles, it is ideal for applications requiring a momentary SPST switch with a max operating force of 3.5N. Suitable for surface mount installations in environments ranging from -40°C to 160°C.
5GSH93582
The Apem Components 5GSH93582 Keypad Switch features a POLYPHENYLENE SULPHIDE housing, COPPER TIN ALLOY terminals, and RED LED illumination. With an electrical life of 10M cycles, it is ideal for applications requiring a SPST switch function in environments with temperatures ranging from -30 to 85°C. IP67 sealing ensures durability in various settings.
5GSH935
5GSH935 by Apem Components is a keypad switch with a single switch and SPST function. It has a max operating temperature of 160°C and an electrical life of 10,000,000 cycles. This switch is commonly used in applications requiring a momentary-tactile action and surface mount-straight mounting feature.
5GSH93542
The Apem Components 5GSH93542 is a keypad switch with POLYPHENYLENE SULPHIDE housing, COPPER TIN ALLOY terminals, and YELLOW LED illumination. It has an electrical life of 10M cycles, IP67 sealing, and operates b/w -30 to 85 °C. Ideal for applications requiring a SPST switch with MOMENTARY-TACTILE action in harsh environments.
5GSH920Q
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Termination Type: SOLDER; Additional Features: STANDARD: MIL-PRF-28855H; Body Width: 10 inch;
5GSH93522
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Center Contact Plating: SILVER; Additional Features: STANDARD: MIL-PRF-28855H; Circuit Config: 1X1;
5GSH93542R
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Minimum Operating Temperature: -30 Cel; Maximum DC Contact Current: .05 A; Maximum Operating Temperature: 85 Cel;
5GSH9352242R
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Maximum DC Contact Current: .05 A; Center Contact Plating: SILVER; Electrical Life: 10000000 Cycle(s);
5GSH935+1SS09-10.4
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): ROUND TYPE; Actuator Travel (mm): 1; Maximum Operating Force: 3.5 N;
5GSH935+1SS0910.4
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Material (Actuator): PPS; Body Width: 10.1 inch; Maximum DC Contact Voltage: 24 V;
5GSH93561R
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Contact Resistance: 30 mohm; Switch Action: MOMENTARY-TACTILE; Insulator Material: POLYPHENYLENE SULPHIDE;
5GSH9358222R
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Housing Material: POLYPHENYLENE SULPHIDE; Electrical Life: 10000000 Cycle(s); Switch Action: MOMENTARY-TACTILE;
5GSH935NCNO
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Body Length/Diameter: 10 mm; Electrical Life: 10000000 Cycle(s); Terminal Material: COPPER TIN ALLOY;
5GSH9358222G
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Body Height: 8.5 mm; No. of Switches: 1; Material (Actuator): POLYPHENYLENE SULPHIDE;
5GSH9358242G
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Minimum Operating Temperature: -30 Cel; Material (Actuator): POLYPHENYLENE SULPHIDE; Maximum Contact Bounce Time: 2 ms;
5GSH93522G
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Switch Action: MOMENTARY-TACTILE; End Contact Plating: GOLD; Body Height: 8.5 mm;
5GSH93529G
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Insulation Resistance: 10000000 ohm; Maximum DC Contact Current: .05 A; Maximum Contact Bounce Time: 2 ms;
5GSH93561G
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Additional Features: STANDARD: MIL-PRF-28855H; Sealing: IP67; End Contact Material: COPPER TIN ALLOY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved