Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' MAX7404EPA+ is an active switched capacitor filter with 8 poles and 0 zeros, operating at a nominal voltage of 3V. It has a lowpass response type with elliptic transfer characteristics, suitable for industrial temperature grade applications. The package style is in-line with through-hole terminals and a max cutoff frequency range of 10 kHz.
Median Price
$17.140
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
$16.050
100+ parts
$10.973
1k+ parts
$8.530
10k+ parts
-
Mouser Electronics
$18.230
$12.550
$11.770
DigiKey
$12.553
$11.772
Verical
$9.178
Digiode
$14.944
Vyrian
Anansix
Andel Nordic
$0.530
$0.368
Vigor
$9.560
Corphita
$14.157
MARBEL Systems
$16.175
Texas Native Microelectronics
$18.592
$17.291
$16.361
Kenton Components
$22.310
$19.633
Semicontronic
$31.470
$30.683
$30.526
Microchip USA
$37.910
$37.370
$37.100
$36.830
Qasali Group International
$50.198
A-Z Elektronik GmbH
Perfect Parts
The plastic/epoxy material provides durability and protection for the active filter, making it suitable for various environments.
Low supply current consumption helps in energy efficiency and can be beneficial for battery-powered applications.
Switched capacitor filters provide precise filtering capabilities and are commonly used in signal processing applications.
The lowpass response type allows only low-frequency signals to pass through, making it ideal for applications where high-frequency noise needs to be filtered out.
Elliptic transfer characteristics offer a combination of sharp roll-off and passband ripple, providing efficient filtering in a compact design.
Active Filters MAX7404EPA+ attributes and parameters. Explore more Active Filters devices from Analog Devices
Supply Voltage Limit:
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage:
Maximum Supply Current (Isup):
Power Supply:
Semiconductor Technology:
Response Type:
Filter Technology:
Maximum Frequency - Cutoff or Center:
Minimum Frequency - Cutoff or Center:
Transfer Characteristics:
Poles and Zeros:
Filter Order:
Maximum Operating Temperature:
Minimum Operating Temperature:
Moisture Sensitivity Level (MSL):
Soldering Temperature:
Temperature Grade:
Reflow Temperature Time Limit:
Total Functions:
Total Terminals:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Length:
Width:
Seated Height Limit:
Package Style:
Form Factor:
Package Code:
Package Equivalence Code:
Package Body Material:
Surface Mounting:
JESD-30 Code:
JESD-609 Code:
Qualified:
MAX7404EPA+ Active Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Daco Semiconductor
Vishay Telefunken
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
North American Philips Discrete Products Div
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
STMicroelectronics
Synsemi
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
Panjit International
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LTC1064-7CN#TRPBF
Analog Devices
LTC1064-7CN#TRPBF by Analog Devices is a 14-terminal active filter with -8V to 8V supply voltage range. It features switched capacitor technology, Bessel response type, and 100 kHz cutoff frequency. Ideal for industrial applications requiring precise lowpass filtering in a compact rectangular package.
MAX291CSA+T
Analog Devices' MAX291CSA+T is an active filter with 8 poles and 0 zeros, operating at a center frequency range of 25 kHz. It has a lowpass Butterworth response type, suitable for commercial applications requiring precise signal filtering. With a compact rectangular package style and Gull Wing terminals, it offers ease of integration in electronic circuits.
LTC1063CSW
LTC1063CSW by Analog Devices is a 16-terminal active filter with -8V to 8V supply voltage range. It features a lowpass Butterworth response type and operates in an industrial temperature range of -40 °C to 85°C. Ideal for applications requiring a switched capacitor filter with a max cutoff frequency of 50 kHz.
MF10CCFN
Texas Instruments
The Texas Instruments MF10CCFN is a 20-terminal active filter with switched capacitor technology. It operates on a supply voltage range of 4-6V and has a max current draw of 10mA. Ideal for applications requiring universal response types and resistor programmable transfer characteristics at temperatures ranging from 0 to 70°C.
MAX7480ESA+T
Analog Devices' MAX7480ESA+T is a switched capacitor active filter with 8 poles and 0 zeros. It operates b/w -40 to 85°C, with a cutoff frequency range of 0.001 kHz to 2 kHz. Ideal for industrial applications requiring lowpass Butterworth response in compact designs.
MAX7418EUA+
Analog Devices' MAX7418EUA+ is a BICMOS active filter with 5 poles and 0 zeros, operating b/w 0-70°C. With a switched capacitor design, it has a lowpass response type and elliptic transfer characteristics. Ideal for applications requiring precise filtering in commercial temperature grades.
TLC04IDR
TLC04IDR by Texas Instruments is a CMOS active filter with 8 terminals and switched capacitor technology. It operates at temperatures from -40 to 85°C, with a cutoff frequency range of 0.0001 kHz to 40 kHz. Ideal for industrial applications requiring lowpass Butterworth transfer characteristics.
MAX260BCWG+
MAX260BCWG+ by Analog Devices is a CMOS active filter with 2 functions, -6.3V to +6.3V supply voltage range, and 10kHz cutoff frequency. Ideal for switched capacitor filtering applications, it features digitally programmable transfer characteristics in a small outline package suitable for commercial temperature grades.
LTC1061CN#TR
LTC1061CN#TR by Analog Devices is a 20-terminal active filter with switched capacitor technology. It operates b/w -40 °C to 85°C, with a cutoff frequency range of 0.0001 kHz to 35 kHz. Ideal for industrial applications requiring resistor programmable transfer characteristics.
LTC1164-7CSW#PBF
LTC1164-7CSW#PBF by Analog Devices is a switched capacitor filter with 8 poles, 0 zeros, and a cutoff frequency range of 20 kHz. It operates b/w -40 to 85 °C and has a small outline package style suitable for industrial applications. With lowpass response and Bessel transfer characteristics, it is ideal for signal processing in various electronic systems.
LTC1064-1CN
LTC1064-1CN by Analog Devices is a CMOS active filter with 8 poles, 0 zeros, and a max cutoff frequency of 50 kHz. It operates b/w -40 to 85 °C and has a supply voltage range from -8V to 8V. Ideal for industrial applications requiring lowpass elliptic/Bessel response filters.
MAX268AENG+
Analog Devices' MAX268AENG+ is a CMOS active filter with 2 functions, operating at -40 to 85 °C. It features a switched capacitor filter with a center frequency range of 0.001 kHz to 140 kHz. Ideal for industrial applications requiring bandpass response and pin programmable transfer characteristics.
MAX295CWE+T
MAX295CWE+T by Analog Devices is an active filter with 8 poles, 0 zeros, and a cutoff frequency range of 0.0001 kHz to 50 kHz. It operates on +-5V power supplies, has a lowpass response type (Butterworth), and is ideal for applications requiring precise signal filtering in commercial temperature environments.
MAX7420EUA+
Analog Devices' MAX7420EUA+ is a BICMOS active filter with 5 poles and 0 zeros. Operating b/w -40 to 85°C, it features a lowpass Butterworth response type. Ideal for industrial applications, this switched capacitor filter has a nominal voltage of 5V and comes in a small outline square package.
LTC1060CSW#TRPBF
LTC1060CSW#TRPBF by Analog Devices is a CMOS active filter with 2 functions. It has a max operating temperature of 85°C and a min supply voltage of 2.37V. This switched capacitor filter is commonly used in industrial applications for its universal response type and transfer characteristics (Butterworth/Bessel/Chebyshev).
MAX7400CSA-T
Maxim Integrated
MAX7400CSA-T by Maxim Integrated is a CMOS active filter with a lowpass response type and elliptic transfer characteristics. It operates at a nominal voltage of 5V and has a max cutoff frequency range of 10 kHz. This small outline package is commonly used in applications requiring switched capacitor filters.
MAX275BCWP
MAX275BCWP by Maxim Integrated is a 28-terminal active filter with -5.5V to 5.5V supply voltage range, consuming 24mA current. Its Gull Wing terminals and small outline package make it suitable for surface mount applications in commercial temperature environments.
MAX7408CUA+
MAX7408CUA+ by Analog Devices is a CMOS active filter with 5 poles and 0 zeros, operating at 5V. It has a lowpass response type with a cutoff frequency range of 0.001 kHz to 15 kHz. Ideal for applications requiring switched capacitor filters in commercial temperature grades.
TLC10CFN
TLC10CFN by Texas Instruments is a CMOS active filter with 2 functions, operating at -4V to 6V. It features a switched capacitor filter with a cutoff frequency range of 20 kHz. Ideal for commercial applications requiring resistor programmable transfer characteristics in a square chip carrier package.
LTC1164-5CSW#PBF
LTC1164-5CSW#PBF by Analog Devices is a switched capacitor filter with 8 poles and 0 zeros, operating in an industrial temperature range from -40 to 85 °C. It has a lowpass response type with a max cutoff frequency of 20 kHz, making it suitable for various active filter applications. This small outline package features gull wing terminals and matte tin finish, ideal for surface mount designs requiring compact components.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
MAX7420EUA
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Response Type: LOWPASS;
MAX7419EUA-T
MAX7419EUA+T
MAX7420EUA-T
MAX7420EUA-T by Maxim Integrated is a BICMOS active filter with 5 poles and 0 zeros. It operates b/w -40 to 85°C, ideal for industrial applications. This switched capacitor filter has a lowpass response type and requires a supply voltage of 4.5-5.5V.
MAX7420EUA+T
MAX7419EUA+
MAX7419EUA
MAX7400ESA
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
MAX7400ESA+
MAX7400ESA+T
MAX7400ESA-T
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved