Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAX291WE by Analog Devices is a switched capacitor active filter with 8 poles and 0 zeros, offering a lowpass Butterworth response type. With a cutoff frequency range of 50 kHz, it operates at -5V negative supply voltage and 5V nominal voltage. This small outline package is ideal for audio signal processing applications.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
Semicontronic
$2.690
$2.623
$2.609
MARBEL Systems
$3.979
Texas Native Microelectronics
$4.573
$4.390
$4.253
$4.024
One Stop Electronics
$4.690
Kenton Components
$5.488
$4.829
Qasali Group International
$12.347
$11.483
$10.865
AZTECH Wire
$17.985
Corphita
This material provides durability and protection for the internal components of the active filter, ensuring a longer lifespan.
Being surface mountable makes installation and assembly easier and more efficient, saving time and effort.
The rectangular shape allows for efficient use of space and easy integration into various electronic systems.
This voltage specification ensures compatibility with systems that require a negative supply voltage, enhancing versatility.
Switched capacitor filters offer high performance and precise filtering capabilities, making this product suitable for demanding applications.
Having 16 terminals allows for flexible connectivity options and integration with other components, enhancing versatility.
The small outline package style saves space and allows for compact design, suitable for applications with limited space constraints.
The lowpass response type ensures that only lower frequencies are passed through the filter, making it ideal for specific filtering requirements.
Active Filters MAX291WE attributes and parameters. Explore more Active Filters devices from Analog Devices
Nominal Supply Voltage:
Nominal Negative Supply Voltage:
Response Type:
Filter Technology:
Maximum Frequency - Cutoff or Center:
Minimum Frequency - Cutoff or Center:
Transfer Characteristics:
Poles and Zeros:
Moisture Sensitivity Level (MSL):
Total Functions:
Total Terminals:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Length:
Width:
Seated Height Limit:
Package Style:
Form Factor:
Package Code:
Package Body Material:
Surface Mounting:
JESD-30 Code:
JESD-609 Code:
Special Features:
Qualified:
MAX291WE Active Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99W-7-F
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
LTC1562IG-2
Analog Devices
LTC1562IG-2 by Analog Devices is a CMOS active filter with 4 functions, -5V to 5V supply voltage range, and 20 terminals. It features continuous time filtering with a cutoff frequency range of 20kHz to 300kHz. Ideal for industrial applications requiring resistor programmable transfer characteristics in a compact small outline package.
MAX7480ESA-T
Maxim Integrated
MAX7480ESA-T by Maxim Integrated is a switched capacitor filter with 8 poles and 0 zeros. Operating b/w -40 to 85°C, it has a cutoff frequency range of 0.001 kHz to 2 kHz. This active filter in a small outline package is ideal for industrial applications requiring lowpass Butterworth response characteristics.
LTC1066-1CSW#PBF
LTC1066-1CSW#PBF by Analog Devices is a switched capacitor filter with 8 poles, 0 zeros, and a cutoff frequency range up to 120 kHz. It operates b/w -2.375V to +8V, making it suitable for lowpass filtering applications in commercial temperature environments. The small outline package with gull wing terminals and matte tin finish enhances its versatility for surface mount designs.
MAX7421CUA+T
Analog Devices' MAX7421CUA+T is a BICMOS active filter with 5 poles and 0 zeros. It operates b/w 0-70 °C, has a supply voltage range of 4.5-5.5V, and features an elliptic lowpass response type. Ideal for applications requiring switched capacitor filters in small outline packages with gull wing terminals.
LTC1565-31IS8#TR
LTC1565-31IS8#TR by Analog Devices is a continuous time active filter with 7 poles and 0 zeros. It operates at a center frequency range of 650 kHz, ideal for lowpass filtering applications. This small outline package has a rectangular shape, Gull Wing terminals, and can handle temperatures from -40 to 85 °C.
MAX7427EUA+
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Response Type: LOWPASS;
MAX7490CEE+
MAX7490CEE+ by Analog Devices is a 16-terminal active filter with 2 functions. It operates on a supply voltage range of 4.5V to 5.5V and has a max current draw of 4mA. Ideal for applications requiring switched capacitor filters with a cutoff frequency range up to 40kHz in commercial temperature environments.
MAX7427CPA+
MAX7427CPA+ by Analog Devices is a BICMOS active filter with 8 terminals and lowpass response. It operates b/w 0-70°C, with cutoff frequency range of 0.001 kHz to 12 kHz. Ideal for applications requiring elliptic transfer characteristics in commercial temperature grade environments.
LTC1569CS8-7
LTC1569CS8-7 by Analog Devices is a CMOS active filter with 10 poles and 0 zeros, operating in a temperature range of 0 to 70 °C. It has a lowpass response type with a cutoff frequency range up to 150 kHz, suitable for commercial applications requiring pin or resistor programmable transfer characteristics.
TLC04CD/MF4A-50CD
TLC04CD/MF4A-50CD by Texas Instruments is an active filter with 4 poles, 0 zeros, and a cutoff frequency range of up to 40 kHz. It operates on +-2.5/+-5V power supplies, consumes 3mA max supply current, and has a response type of lowpass. Ideal for applications requiring switched capacitor filters in commercial temperature grades.
LTC1068-200CG#PBF
LTC1068-200CG#PBF by Analog Devices is a 4-function active filter with switched capacitor technology. It operates at -5V to 5V, has a cutoff frequency range of 0.0005 kHz to 25 kHz, and is ideal for universal response type applications in commercial temperature grades.
MAX292ESA
MAX292ESA by Maxim Integrated is an active filter with 8 poles and zeros, operating at a center frequency range of 0.0001 kHz to 25 kHz. It has a lowpass response type with Bessel transfer characteristics, suitable for industrial applications requiring switched capacitor filters. The package style is small outline, making it ideal for surface mount designs with a terminal pitch of 1.27 mm.
MAX7408CUA+T
Analog Devices' MAX7408CUA+T is a CMOS active filter with 5 poles and 0 zeros, operating at a voltage range of 4.5V to 5.5V. With a lowpass response type and elliptic transfer characteristics, it has a cutoff frequency range from 0.001 kHz to 15 kHz. Ideal for applications requiring precise signal filtering in commercial temperature environments.
LTC1064-1CSW#TRPBF
LTC1064-1CSW#TRPBF by Analog Devices is a switched capacitor filter with 8 poles, 0 zeros, and a max cutoff frequency of 50 kHz. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package suitable for surface mount applications. Ideal for lowpass filtering in various electronic circuits.
MF10CCWMX/NOPB
The Texas Instruments MF10CCWMX/NOPB is a CMOS active filter with 20 terminals and a small outline package. It operates on a supply voltage range of 4.5V to 7V, with a max current draw of 12mA. Ideal for applications requiring switched capacitor filters with universal response types up to 20kHz cutoff frequency.
LTC1064-7CSW#PBF
LTC1064-7CSW#PBF by Analog Devices is a switched capacitor active filter with 8 poles and 0 zeros, operating in a temperature range of -40 to 85 °C. It has a lowpass response type with Bessel transfer characteristics and a max cutoff frequency of 100 kHz. Ideal for industrial applications requiring precise signal filtering in compact spaces.
LTC1560-1IS8
LTC1560-1IS8 by Analog Devices is a CMOS active filter with 5 poles and zeros, operating in the -40 to 85 °C temperature range. It has a lowpass response type with elliptic transfer characteristics and a max cutoff frequency of 1000 kHz. This small outline package is ideal for industrial applications requiring precise signal filtering.
LTC1064-3CN#PBF
LTC1064-3CN#PBF by Analog Devices is a CMOS active filter with -8V to 8V supply voltage range. It features 8 poles, 0 zeros, and a cutoff frequency of 95 kHz. Ideal for industrial applications requiring lowpass Bessel response filters in an in-line package style.
MAX280CWE+
MAX280CWE+ by Analog Devices is a CMOS active filter with 16 terminals, operating at ±5V power supplies. It features a lowpass Butterworth response type with 5 poles and zeros, suitable for applications requiring a cutoff frequency range of 0-20 kHz. The package style is small outline, making it ideal for compact designs in commercial temperature grade environments.
MAX7490EEE+T
Analog Devices' MAX7490EEE+T is a BICMOS active filter with 2 functions, operating at 5V. It features switched capacitor technology, Butterworth/Bessel/Elliptic response types, and a cutoff frequency range up to 40 kHz. Ideal for industrial applications requiring precise signal filtering in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
MAX292ESA+
MAX292ESA+ by Analog Devices is an active filter with switched capacitor technology. It operates on +-5V power supplies, has 8 poles and zeros, and a lowpass Bessel response type. With a cutoff frequency range of 0.0001 kHz to 25 kHz, it is ideal for industrial applications requiring precise signal filtering in a compact small outline package.
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
MAX291CPA
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Response Type: LOWPASS;
MAX291CPA+
MAX275BCWP+
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; JESD-30 Code: R-PDSO-G28;
MAX275BCWP
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Maximum Supply Current (Isup): 24 mA;
MAX275BCWP+ by Analog Devices is an active filter with 24mA Isup, -5.5V Vsup, and 70°C max operating temp. Ideal for applications requiring precise signal filtering in commercial-grade environments.
MAX274BEWI
MAX274BEWI by Maxim Integrated is an active filter with 30 mA Isup, -5.5 V to 5.5 V Vsup range, and 28 terminals in a small outline package. It is used in industrial applications for signal processing and noise filtering due to its wide operating temperature range of -40°C to 85°C.
MAX274BEWI+
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Terminal Pitch: 1.27 mm;
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Terminal Finish: MATTE TIN;
MAX274AEWI
MAX274AEWI by Maxim Integrated is an active filter with 30mA Isup, -5.5V to 5.5V Vsup range, and 28 terminals in a small outline package. Ideal for industrial applications requiring precise signal filtering and conditioning in a compact form factor.
MAX274AEWI+
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Minimum Supply Voltage (Vsup): 2.37 V;
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Moisture Sensitivity Level (MSL): 1;
MAX274BCWI
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Maximum Supply Voltage (Vsup): 5.5 V;
MAX274BCWI+
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Nominal Negative Supply Voltage (Vsup): -5 V;
MAX293CPA+
MAX293CPA
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved