Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAX274ACWI+ by Analog Devices is a 28-terminal active filter with -5.5V to 5.5V supply voltage range, suitable for commercial applications. It features a small outline package style, Gull Wing terminals, and operates b/w 0 °C to 70°C temperature range.
Median Price
$28.830
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
$21.260
100+ parts
-
1k+ parts
$17.380
10k+ parts
Mouser Electronics
$36.400
$25.800
$24.920
Digiode
$17.566
Vyrian
Anansix
Component Stockers USA
$3.880
$3.680
$3.570
MARBEL Systems
$10.809
Texas Native Microelectronics
$12.424
$11.927
$11.554
$10.933
Vigor
$14.270
Kenton Components
$14.909
$13.120
Semicontronic
$15.720
$15.327
$15.248
Corphita
$16.641
AZTECH Wire
$17.168
Qasali Group International
$33.545
$31.197
$29.519
Microchip USA
$46.529
Perfect Parts
PLASTIC/EPOXY material provides durability and reliability, making the product suitable for various environments and applications.
Surface mount capability allows for easy and efficient installation, saving time and effort during assembly.
Rectangular shape allows for space-efficient design and optimization of circuit board layout.
With a nominal supply voltage of 5V, this product is compatible with standard power sources, offering ease of integration.
High maximum operating temperature ensures reliable performance even in demanding conditions.
Close terminal pitch allows for compact design and efficient use of space on the circuit board.
Matte Tin finish offers good solderability and corrosion resistance, ensuring a strong and durable connection.
High maximum supply voltage ensures compatibility with a wide range of power sources and applications.
Compact width allows for space-efficient design and easy integration into various systems.
Low minimum supply voltage allows for flexibility in power supply options, making the product versatile.
Active Filters MAX274ACWI+ attributes and parameters. Explore more Active Filters devices from Analog Devices
Supply Voltage Limit:
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Nominal Negative Supply Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Moisture Sensitivity Level (MSL):
Soldering Temperature:
Temperature Grade:
Reflow Temperature Time Limit:
Total Functions:
Total Terminals:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Length:
Width:
Seated Height Limit:
Package Style:
Form Factor:
Package Code:
Package Body Material:
Surface Mounting:
JESD-30 Code:
JESD-609 Code:
Special Features:
Qualified:
MAX274ACWI+ Active Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Vishay Telefunken
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
General Instrument
Panjit International
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
Infinex
LTC1069-7CS8#TR
Analog Devices
LTC1069-7CS8#TR by Analog Devices is a CMOS active filter with -5V to 5V supply voltage range. It features switched capacitor technology, Bessel response type, and 200 kHz cutoff frequency. Ideal for lowpass filtering applications in commercial temperature environments.
LTC1065ISW#TR
LTC1065ISW#TR by Analog Devices is a switched capacitor active filter with 5 poles and 0 zeros, offering a lowpass response type. It operates in an industrial temperature range from -40 to 85 °C, with a cutoff frequency range up to 50 kHz. This rectangular package has Gull Wing terminals and is suitable for various filtering applications.
MAX7422EUA
MAX7422EUA by Analog Devices is a BICMOS active filter with 3.4 mA Isup and 3V Vsup, featuring a switched capacitor filter design. Ideal for industrial applications, this lowpass filter has 5 poles and zeros, operates b/w -40 to 85 °C, and comes in a small outline package with GULL WING terminals.
MAX295CSA+T
Analog Devices' MAX295CSA+T is an active switched capacitor filter with 8 poles and 0 zeros. It operates on +-5V power supplies, has a cutoff frequency range of 50 kHz, and features a lowpass Butterworth response type. Ideal for commercial applications requiring precise signal filtering in a compact small outline package.
LTC1063CN8#PBF
LTC1063CN8#PBF by Analog Devices is an 8-terminal active filter with -8V to 8V supply voltage range, featuring a lowpass Butterworth response type and 50 kHz cutoff frequency. Ideal for industrial applications, this switched capacitor filter operates b/w -40 °C to 85°C temperatures in a rectangular plastic/epoxy package.
LTC1064ACN#PBF
LTC1064ACN#PBF by Analog Devices is a 24-terminal active filter with 4 functions. It operates at -40 to 85 °C and has a cutoff frequency range of 0.0001 kHz to 140 kHz. Ideal for industrial applications, it features resistor programmable transfer characteristics in a rectangular package with through-hole terminals.
MAX268BCNG+
Analog Devices' MAX268BCNG+ is a CMOS active filter with 2 functions, operating at -6.3V to +6.3V. With a max supply current of 20mA, it offers bandpass response type and switch capacitor filter technology. Ideal for applications requiring precise filtering in commercial temperature grades.
MAX271CPP
Analog Devices' MAX271CPP is a CMOS active filter with 2 functions, -5V to +5V supply voltage, and 6.5mA max current. Ideal for commercial applications, it operates b/w 0 °C to 70°C temperature range in a rectangular package with through-hole terminals.
MAX292ESA
Maxim Integrated
MAX292ESA by Maxim Integrated is an active filter with 8 poles and zeros, operating at a center frequency range of 0.0001 kHz to 25 kHz. It has a lowpass response type with Bessel transfer characteristics, suitable for industrial applications requiring switched capacitor filters. The package style is small outline, making it ideal for surface mount designs with a terminal pitch of 1.27 mm.
LTC1060CSW
Linear Technology
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Response Type: UNIVERSAL;
LTC1164-6CN#PBF
LTC1164-6CN#PBF by Analog Devices is a 14-terminal active filter with -8V to 8V supply voltage range. It features switched capacitor technology, lowpass response type, and elliptic/Bessel transfer characteristics. Ideal for industrial applications requiring a cutoff frequency up to 30kHz in a compact rectangular package.
MAX293CWE+
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Response Type: LOWPASS;
MAX7419EUA
MAX7419EUA by Analog Devices is a BICMOS active filter with 4.1 mA Isup, suitable for switched capacitor filtering applications. It operates b/w -40 to 85 °C, has 5 poles and zeros, and requires Vsup of 4.5-5.5V. The package is small outline with gull wing terminals, ideal for industrial use in lowpass filtering systems.
LTC1064-7CN#PBF
LTC1064-7CN#PBF by Analog Devices is a 14-terminal active filter with -8V to 8V supply voltage range. It features switched capacitor technology, Bessel response type, and 100 kHz cutoff frequency. Ideal for industrial applications requiring precise lowpass filtering in a compact rectangular package.
MAX297EWE+T
Analog Devices' MAX297EWE+T is a switched capacitor active filter with 8 poles and 0 zeros, operating at -40 to 85 °C. It has a lowpass response type with elliptic transfer characteristics and a cutoff frequency range of 50 kHz. Ideal for industrial applications requiring precise signal filtering in compact designs.
32F8103-CN
The Texas Instruments 32F8103-CN is a small outline active filter with continuous time filtering, ideal for lowpass applications. It operates b/w 0-70°C with a supply voltage range of 4.5-5.5V and features Bessel transfer characteristics at a cutoff frequency range of 3700-12000 kHz.
LTC1064CSW#PBF
LTC1064CSW#PBF by Analog Devices is a 24-terminal active filter with switched capacitor technology. It operates at -40 to 85°C, with a cutoff frequency range of 0.0001-140 kHz. Ideal for industrial applications requiring resistor programmable transfer characteristics in a compact small outline package.
LTC1563-2CGN
LTC1563-2CGN by Analog Devices is a 16-terminal active filter with continuous time filtering, operating b/w 0 °C to 70°C. It features a lowpass response type with Butterworth transfer characteristics and a cutoff frequency range of 0.256 kHz to 256 kHz. Ideal for applications requiring precise signal processing in commercial temperature environments.
MAX271CWG+
Analog Devices' MAX271CWG+ is a CMOS active filter with 2 functions, operating at ±5V power supplies. It features continuous time filtering with a cutoff frequency range of 0.001 kHz to 25 kHz, making it ideal for lowpass response applications in commercial temperature grades.
LTC1067CGN
LTC1067CGN by Analog Devices is a CMOS active filter with 2 functions, operating b/w 0-70 °C. It features a switched capacitor filter technology, with a cutoff frequency range of 0.001 kHz to 20 kHz. This small outline package is ideal for universal response type applications requiring resistor programmable transfer characteristics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
MAX292ESA+
MAX292ESA+ by Analog Devices is an active filter with switched capacitor technology. It operates on +-5V power supplies, has 8 poles and zeros, and a lowpass Bessel response type. With a cutoff frequency range of 0.0001 kHz to 25 kHz, it is ideal for industrial applications requiring precise signal filtering in a compact small outline package.
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
MAX291CPA
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Response Type: LOWPASS;
MAX291CPA+
MAX275BCWP+
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; JESD-30 Code: R-PDSO-G28;
MAX275BCWP
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Maximum Supply Current (Isup): 24 mA;
MAX275BCWP+ by Analog Devices is an active filter with 24mA Isup, -5.5V Vsup, and 70°C max operating temp. Ideal for applications requiring precise signal filtering in commercial-grade environments.
MAX274BEWI
MAX274BEWI by Maxim Integrated is an active filter with 30 mA Isup, -5.5 V to 5.5 V Vsup range, and 28 terminals in a small outline package. It is used in industrial applications for signal processing and noise filtering due to its wide operating temperature range of -40°C to 85°C.
MAX274BEWI+
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Terminal Pitch: 1.27 mm;
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Terminal Finish: MATTE TIN;
MAX274AEWI
MAX274AEWI by Maxim Integrated is an active filter with 30mA Isup, -5.5V to 5.5V Vsup range, and 28 terminals in a small outline package. Ideal for industrial applications requiring precise signal filtering and conditioning in a compact form factor.
MAX274AEWI+
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Minimum Supply Voltage (Vsup): 2.37 V;
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Moisture Sensitivity Level (MSL): 1;
MAX274BCWI
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Maximum Supply Voltage (Vsup): 5.5 V;
MAX274BCWI+
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Nominal Negative Supply Voltage (Vsup): -5 V;
MAX293CPA+
MAX293CPA
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved