Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Matte Tin (Sn) - annealed;
Median Price
$3.214
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$2.969
Rochester
$3.460
$3.090
$2.910
Vyrian
$2.400
Digiode
Anansix
Semicontronic
$2.040
$1.989
$1.979
MARBEL Systems
$3.578
Texas Native Microelectronics
$4.113
$3.948
$3.825
$3.619
Kenton Components
$4.936
$4.343
Qasali Group International
$11.105
$10.328
$9.772
QUARKTWIN TECHNOLOGY LTD
Microchip USA
Corphita
Adjustable Regulators - Positive Multiple Output LDO MAX1799ETP+T attributes and parameters. Explore more Adjustable Regulators - Positive Multiple Output LDO devices from Analog Devices
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Regulator Type:
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
MAX1799ETP+T Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Daco Semiconductor
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
Fairchild Semiconductor
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LT3029HMSE#TRPBF
Analog Devices
LT3029HMSE#TRPBF by Analog Devices is an adjustable positive multiple output LDO regulator with a max dropout voltage of 0.46 V and operating temperature range from -40 to 150 °C. It comes in a small outline package suitable for surface mount applications, making it ideal for various electronic devices requiring stable voltage regulation.
TPS7A8701RTJT
TPS7A8701RTJT by Texas Instruments is an adjustable positive multiple output LDO regulator with a max dropout voltage of 0.1 V, operating temperature range from -40 to 125°C, and a package style of chip carrier. It is suitable for applications requiring precise voltage regulation in compact electronic devices.
LT3024EDE#TR
LT3024EDE#TR by Analog Devices is an adjustable positive multiple output LDO regulator with a max dropout voltage of 0.45 V, operating temperature range from -40 to 125 °C, and two outputs capable of delivering up to 0.1A and 0.5A respectively. It is suitable for applications requiring precise voltage regulation in compact spaces.
MAX8636ETA+T
Maxim Integrated
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; No. of Functions: 1; Surface Mount: YES;
LT3028EDHC#PBF
LT3028EDHC#PBF by Analog Devices is an adjustable positive multiple output LDO regulator with a max dropout voltage of 0.47V and 0.45V, suitable for applications requiring precise voltage regulation in compact spaces. With a package style of small outline and very thin profile, it offers dual terminals and can handle up to 0.5A of current output per channel at a max temperature of 125 °C.
LT3023IMSE#PBF
Analog Devices' LT3023IMSE#PBF is a small outline, heat sink LDO regulator with 2 outputs. It offers a max output voltage of 20V and dropout voltage of 0.45V, suitable for applications requiring precise voltage regulation in compact spaces.
LT3024EDE
LT3024EDE by Analog Devices is an Adjustable Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.45 V, operating temperature range from -40 to 125 °C, and a max output voltage of 20 V. Ideal for applications requiring precise voltage regulation in compact spaces.
LT3029HDE#TRPBF
LT3029HDE#TRPBF by Analog Devices is an Adjustable Positive Multiple Output LDO Regulator with a max output voltage of 19.5V and a max dropout voltage of 0.46V. This regulator, suitable for surface mount applications, has a package style of Small Outline, Heat Sink/Slug, Very Thin Profile making it ideal for compact electronic devices requiring stable power supply solutions.
LT3024EFE
LT3024EFE by Analog Devices is an Adjustable Positive Multiple Output LDO Regulator with a max output voltage of 20V and max dropout voltage of 0.45V. This regulator, suitable for surface mount applications, has two outputs with current ratings of 0.1A and 0.5A, making it ideal for various electronic devices requiring stable power supply.
LT3028EDHC#TR
LT3028EDHC#TR by Analog Devices is an adjustable positive multiple output LDO regulator with a max dropout voltage of 0.47V and 0.45V, suitable for applications requiring precise voltage regulation in compact spaces. With a package style of small outline and very thin profile, it offers dual terminals and can handle max output currents of 0.1A and 0.5A respectively.
LT3029HMSE
LT3029HMSE by Analog Devices is an adjustable positive multiple output LDO regulator with a max dropout voltage of 0.46 V and operating temperature range from -40 to 150 °C. It features two outputs with a min voltage of 1.215 V and max current of 0.5 A, suitable for various applications requiring precise voltage regulation in compact designs.
TPS71202DRCR
TPS71202DRCR by Texas Instruments is an adjustable positive multiple output LDO regulator with a max dropout voltage of 0.23 V, operating temperature range from -40 to 125°C, and a package style of small outline with very thin profile. It is suitable for applications requiring precise voltage regulation in compact electronic devices.
TPS70402PWPR
TPS70402PWPR by Texas Instruments is an adjustable positive multiple output LDO regulator with a max dropout voltage of 0.25 V, operating temperature range from -40 to 125°C, and a package style of small outline. It is suitable for applications requiring precise voltage regulation in compact electronic devices.
LT3030EUFD#TRPBF
Analog Devices' LT3030EUFD#TRPBF is a BIPOLAR technology Adjustable Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.48 V, Max Input-Output Voltage Differential of 18.78 V, and Operating Temperature range from -40 to 125 °C. Ideal for applications requiring precise voltage regulation in compact spaces.
CS8183YDWFR20G
CS8183YDWFR20G by Onsemi is a BIPOLAR technology Adjustable Positive Multiple Output LDO Regulator with 2 outputs, each supporting up to 0.2 A current. It has a max output voltage of 45 V and dropout voltage of 0.6 V, making it ideal for applications requiring precise voltage regulation in compact spaces.
LT3024IDE
LT3024IDE by Analog Devices is an adjustable positive multiple output LDO regulator with a max dropout voltage of 0.45 V and operating temperature range from -40 to 125 °C. It features two outputs with min voltage of 1.22 V and max current ratings of 0.1A and 0.5A, making it ideal for applications requiring precise voltage regulation in compact spaces.
MAX1798EUP+T
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: TSSOP; Terminal Form: GULL WING; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN;
LT3023EMSE#TRPBF
LT3023EMSE#TRPBF by Analog Devices is a dual-output LDO regulator with a max output voltage of 20V and max dropout voltage of 0.45V. It comes in a small outline package suitable for surface mount applications, making it ideal for compact electronic devices requiring stable power regulation in a wide temperature range from -40 °C to 125°C.
LT3029IDE
LT3029IDE by Analog Devices is an Adjustable Positive Multiple Output LDO Regulator with a max output voltage of 19.5V and a max dropout voltage of 0.46V. This regulator, suitable for surface mount applications, has two outputs each capable of delivering up to 0.5A, making it ideal for various electronic devices requiring stable power sources in compact designs.
MAX8636ELA+T
MAX8636ELA+T by Analog Devices is an adjustable positive multiple output LDO regulator with a max dropout voltage of 0.2V, operating temperature up to 150 °C, and dual terminals. It is suitable for applications requiring precise voltage regulation in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
MAX1799AEUP+
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: TSSOP; Terminal Form: GULL WING; Minimum Output Voltage-2: 1.8 V; Package Shape: RECTANGULAR;
MAX1798EGP+T
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: VQCCN; Terminal Form: NO LEAD; Minimum Output Voltage-1: 1.8 V; Maximum Output Current-1: .3 A;
MAX1799ETP+
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Matte Tin (Sn) - annealed; Moisture Sensitivity Level (MSL): 1;
MAX1798AEUP+
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: TSSOP; Terminal Form: GULL WING; No. of Functions: 1; Minimum Output Voltage-1: 1.8 V;
MAX1799EGP+T
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: VQCCN; Terminal Form: NO LEAD; Maximum Output Current-2: .15 A; Minimum Output Voltage-2: 1.8 V;
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: TSSOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Surface Mount: YES;
MAX1799EGP
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: VQCCN; Terminal Form: NO LEAD; Maximum Dropout Voltage-2: .1 V; Maximum Output Voltage-1: 3.3 V;
MAX1799EGP-T
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: VQCCN; Terminal Form: NO LEAD; Terminal Pitch: .65 mm; Maximum Dropout Voltage-1: .125 V;
MAX1798AEUP
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: TSSOP; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE, THIN PROFILE, SHRINK PITCH; No. of Functions: 1;
MAX1798AEUP-T
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: TSSOP; Terminal Form: GULL WING; Width: 4.4 mm; JESD-609 Code: e0;
MAX1798EUP+
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: TSSOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Package Body Material: PLASTIC/EPOXY;
MAX1799AEUP
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: TSSOP; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY; Terminal Position: DUAL;
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: VQCCN; Terminal Form: NO LEAD; Terminal Position: QUAD; Terminal Finish: TIN LEAD;
MAX1798EUP
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Dropout Voltage-2: .1 V; Package Style (Meter): SMALL OUTLINE, THIN PROFILE, SHRINK PITCH;
MAX1798EGP
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: VQCCN; Terminal Form: NO LEAD; Minimum Output Voltage-2: 1.8 V; Length: 5 mm;
MAX1798EUP-T
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: TSSOP; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G20; Maximum Output Current-1: .3 A;
MAX1798ETP+
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
MAX1798AEGP
ADJUSTABLE POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: VQCCN; Terminal Form: NO LEAD; Maximum Output Voltage-2: 3.3 V; Minimum Output Voltage-1: 1.8 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved