Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' MAX1792EUA18+T is a CMOS LDO regulator with 1.8V output voltage, 0.5A max current, and 1% load regulation. Ideal for applications requiring precise voltage regulation in compact spaces due to its small outline package and low dropout voltage of 0.21V.
Median Price
$3.940
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
$3.690
100+ parts
$2.306
1k+ parts
$2.056
10k+ parts
$1.956
DigiKey
$4.190
$2.636
$2.357
$2.287
Mouser Electronics
$2.640
$2.360
$2.280
Verical
-
$1.806
Digiode
$4.446
Vyrian
$4.680
LIBRA Elektronik GmbH
Chip Stock
ComSIT Distribution GmbH
Cyclops Electronics Ltd
Anansix
Corphita
$4.212
Semicontronic
$4.330
$4.222
$4.200
MARBEL Systems
$6.809
Texas Native Microelectronics
$7.826
$7.513
$7.278
$6.887
Kenton Components
$9.391
$8.264
Microchip USA
$12.480
$12.400
$12.360
$12.330
Qasali Group International
$21.130
$19.651
$18.595
Kepictronics
Perfect Parts
The use of plastic/epoxy material makes the package lightweight and durable, ideal for portable or handheld devices.
Being surface mountable allows for easy and efficient PCB assembly, saving time and reducing production costs.
The wide operating temperature range of up to 150°C allows for reliable performance in various environmental conditions.
CMOS technology offers low power consumption and high efficiency, making the regulator suitable for battery-powered applications.
The square package shape allows for efficient use of board space and easy placement on the PCB.
Gull wing terminals provide secure and reliable connections, ensuring stable operation of the regulator.
The stable output voltage of 1.8 V is suitable for powering sensitive electronic components, ensuring consistent performance.
The low load regulation percentage ensures that the output voltage remains constant even with varying load conditions, ensuring reliable operation.
Fixed & Adjustable Regulators - Positive Single Output LDO MAX1792EUA18+T attributes and parameters. Explore more Fixed & Adjustable Regulators - Positive Single Output LDO devices from Analog Devices
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Line Regulation (%/V):
Maximum Load Regulation:
Maximum Load Regulation (%):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
MAX1792EUA18+T Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Micropac Industries
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Continental Device India
EU2B-YS3303C
Idec
ROTARY SWITCH;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LP2951CM-3.3/NOPB
National Semiconductor
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %;
MAX6349SLUT+T
Analog Devices
Analog Devices' MAX6349SLUT+T is a BICMOS LDO regulator with 3.3V output, 0.15A max current, and 0.36V dropout voltage. Ideal for applications requiring precise voltage regulation in compact spaces due to its small outline package and low profile design.
MAX6469TA29BD3
Analog Devices' MAX6469TA29BD3 is a BICMOS LDO regulator with 2.9V output voltage, 0.3A max current, and 5V max output. Ideal for applications requiring fixed/adjustable positive single output regulators in compact designs with surface mount capability. Operating temp range from -40 to 85 °C makes it versatile for various electronic devices.
MAX6470TA15BD2
Analog Devices' MAX6470TA15BD2 is a BICMOS LDO regulator with 1.5V output voltage, 0.3A max current, and 2.7% voltage tolerance. Ideal for applications requiring fixed/adjustable positive single output regulators in compact spaces with temp range -40 to +85 °C.
MAX6470TA22BD3
Analog Devices' MAX6470TA22BD3 is a BICMOS LDO regulator with 2.7% voltage tolerance, ideal for applications requiring a fixed or adjustable output voltage up to 5V and current of 0.3A. Operating b/w -40 °C to 85°C, it features a small square package suitable for surface mount assembly with dual terminals and tin lead finish.
LP2986AIMMX-5.0
Texas Instruments
LP2986AIMMX-5.0 by Texas Instruments is a BIPOLAR LDO Regulator with 8 terminals, offering a fixed 5V output voltage and max current of 0.2A. It has a small outline package style suitable for surface mount applications, operating within -40 to 125 °C temperature range.
MAX6470TA16AD2
Analog Devices' MAX6470TA16AD2 is a BICMOS LDO regulator with 1.6V output voltage, 0.3A max current, and 2.7% voltage tolerance. Ideal for applications requiring fixed/adjustable positive single output regulators in compact spaces with temp range -40 to +85 °C.
MAX6469TA15BD1
Analog Devices' MAX6469TA15BD1 is a BICMOS LDO regulator with 1.5V output voltage, 0.3A output current, and 2.7% voltage tolerance. Ideal for applications requiring fixed/adjustable positive single output regulators in compact designs with surface mount capability.
LP2953AI3.3MDC
LP2953AI3.3MDC by Texas Instruments is a BIPOLAR LDO Regulator with 0.8V Dropout Voltage, 29V Max Output Voltage, and 0.25A Max Output Current. Ideal for applications requiring fixed or adjustable positive single output voltage regulation in a surface mount package style.
LP2951-02YM-TR
Microchip Technology
LP2951-02YM-TR by Microchip is a fixed/adjustable positive single output LDO regulator with a max output voltage of 29V and dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LP5904TME-1.2/NOPB
LP5904TME-1.2/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with a max output current of 0.2A and a nominal output voltage of 1.2V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
MAX6469UT20AD1
Analog Devices' MAX6469UT20AD1 is a BICMOS LDO regulator with 6 terminals, offering an output voltage range of 1.229V to 5V and a max current of 0.3A. With a small outline package style, it is ideal for applications requiring fixed or adjustable positive single output regulators in compact spaces with operating temperatures from -40 °C to 85°C.
MAX5024TASA/V+
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
MAX6349YPUT+T
Analog Devices' MAX6349YPUT+T is a BICMOS LDO regulator with 0.4V dropout voltage, 2.25-2.75V output range, and 0.15A max current. Ideal for applications requiring precise voltage regulation in compact spaces due to its small outline package and low profile design.
MIC2951-3.3YM
Rochester Electronics
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Operating Temperature (TJ-Min): -40 Cel; Maximum Output Current-1: .15 A;
MAX1793EUE-18
Maxim Integrated
MAX1793EUE-18 by Maxim Integrated is a PMOS LDO regulator with 1.8V output voltage, 1A max current, and 3% voltage tolerance. Ideal for applications requiring fixed/adjustable positive single output regulators in compact spaces with surface mount technology.
LP2960AIMX-5.0
LP2960AIMX-5.0 by Texas Instruments is a BIPOLAR LDO Regulator with 16 terminals, offering a max output voltage of 5.07 V and a dropout voltage of 0.8 V. Ideal for applications requiring a small outline package style and adjustable positive single output, such as portable electronic devices.
MAX6469UT16BD3
Analog Devices' MAX6469UT16BD3 is a BICMOS LDO regulator with 1.6V output voltage, 0.3A output current, and 2.7% voltage tolerance. Ideal for applications requiring fixed/adjustable positive single output regulators in compact spaces with operating temperatures ranging from -40 °C to 85°C.
LT1580CT
Analog Devices' LT1580CT is a fixed/adjustable positive single output LDO regulator with max. dropout voltage of 0.8V and max. output current of 7A. It operates in temp range of 0-150 °C, ideal for applications requiring precise voltage regulation in various electronic devices.
MAX6469TA17BD1
Analog Devices' MAX6469TA17BD1 is a BICMOS LDO regulator with 1.7V output voltage, 0.3A output current, and 2.7% voltage tolerance. Ideal for applications requiring fixed/adjustable positive single output regulators in compact designs with surface mount capability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
MAX1792EUA25+
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 3 %;
MAX1792EUA25
MAX1792EUA25+T
MAX1792EUA25-T
MAX1792EUA25/V+
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Screening Level: AEC-Q100; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
MAX1792EUA25/V+T
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30;
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; Screening Level: AEC-Q100; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN;
MAX1818EUT50#TG16
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 3 %;
MAX1818EUT33+T
MAX1818EUT33+T by Analog Devices is a fixed positive LDO regulator with a 3.3V output voltage and 0.5A max output current. It has a small outline package style, Gull Wing terminal form, and operates at temperatures up to 150°C. Ideal for applications requiring stable power supply in compact electronic devices.
MAX1818EUT33-T
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: LSSOP; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY; Operating Temperature (TJ-Max): 150 Cel;
MAX1818EUT33#T
MAX1818EUT33#T by Maxim Integrated is a CMOS technology-based LDO regulator with a fixed or adjustable output voltage of 3.3V. It has a max load regulation of 1% and can handle an output current of up to 0.5A. This regulator is commonly used in applications requiring stable and precise voltage regulation, such as portable electronics and automotive systems.
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: LSSOP; Terminal Form: GULL WING; Operating Temperature (TJ-Max): 150 Cel; Moisture Sensitivity Level (MSL): 1;
MAX1818EUT50#T
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Output Current-1: .5 A; Terminal Finish: TIN LEAD;
MAX1818EUT50+T
Analog Devices' MAX1818EUT50+T is a fixed/adjustable positive single output LDO regulator with a max output current of 0.5A and a dropout voltage of 0.22V. This small outline, low profile package is ideal for applications requiring a stable 5V output voltage in compact designs, such as portable electronics or IoT devices.
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: LSSOP; Terminal Form: GULL WING; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
MAX1818EUT50-T
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: LSSOP; Terminal Form: GULL WING; Length: 2.9 mm; Minimum Output Voltage-1: 1.25 V;
MAX1818EUT18+T
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: LSSOP; Terminal Form: GULL WING; Nominal Output Voltage-1: 1.8 V; Maximum Output Current-1: .5 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved