Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAX17504ATP+T by Analog Devices is a current-mode switching regulator with 3.5A output current and 2450 kHz max switching frequency. It operates b/w -40 to 125°C, making it suitable for automotive applications. The chip carrier package has 20 terminals in a square shape, ideal for surface mount assembly.
Median Price
$4.825
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Newark
1+ parts
$4.750
100+ parts
$3.020
1k+ parts
$2.750
10k+ parts
$2.720
Mouser Electronics
$5.750
$3.660
$3.600
$3.050
DigiKey
$5.830
$3.743
$3.596
-
Arrow
$2.882
Verical
$6.086
Element14
$4.900
$4.520
Farnell
$4.738
$3.408
$3.227
Rochester
$2.940
$2.630
$2.470
EXC GmbH
$3.041
Maritex
$3.527
$1.953
$1.599
Digiode
$3.556
Nova Conductors
$3.598
Vyrian
Chip Stock
Cyclops Electronics Ltd
Rebound Electronics
Anansix
ComSIT Distribution GmbH
PC Components Company LLC
Bristol Electronics
Contempo Components LLC
Micros
$3.845
$3.766
Component Sense
Component Stockers USA
$1.090
$1.040
$1.000
$1.260
Semicontronic
$3.030
$2.954
$2.939
Ampacity Inc.
Corphita
$3.369
Argo Parts USA
$3.480
Corohmni
$3.490
Advanced Electronics
$3.595
$3.415
Netroflash
Continental Prestige Electronics
$4.460
$3.290
$2.510
Aztec Data Supply Inc.
$6.950
MARBEL Systems
$17.664
Texas Native Microelectronics
$20.303
$18.882
$17.867
Kenton Components
$24.364
$21.440
Qasali Group International
$54.818
GreenTree Electronics
S.R.D Solutions
Epart123
$2.600
Authorized Procurement Solutions
iodParts Technologies Inc.
Lixinc
RC Electronics
Perfect Parts
Kepictronics
A-Z Elektronik GmbH
Glotronic Ltd.
Infinite Electronics LLP (Excess)
Robosynatics
Lucentia Tech
$3.420
$3.350
Futuretech Components
The use of plastic/epoxy as the package body material provides durability and protection for the internal components of the switching regulator, making it a reliable choice for long-term use.
Being surface mountable allows for easy and efficient integration of the switching regulator onto circuit boards, saving space and simplifying the assembly process.
With a maximum operating temperature of 125 °C, this switching regulator is suitable for high-temperature environments, ensuring stable performance even under demanding conditions.
The current-mode control mode offers enhanced stability and precision in regulating the output of the switching regulator, making it a reliable choice for various applications.
With a maximum output current of 3.5 A, this switching regulator can deliver sufficient power to drive connected components, making it suitable for a wide range of electronic devices.
The high switching frequency of 2450 kHz allows for efficient power conversion and regulation, resulting in improved energy efficiency and reduced heat generation in the switching regulator.
Designed for automotive applications, this switching regulator meets stringent temperature and performance requirements, ensuring reliable operation in automotive systems and vehicles.
Switching Regulators & Controllers MAX17504ATP+T attributes and parameters. Explore more Switching Regulators & Controllers devices from Analog Devices
Control Mode:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Sub-Category:
Surface Mount:
Maximum Switching Frequency:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
MAX17504ATP+T Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Itt Semiconductor
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
MCP16311-E/MS
Microchip Technology
MCP16311-E/MS by Microchip is a current-mode BUCK switching regulator with 2-24V output range, 575kHz max frequency, and AEC-Q100 screening. Ideal for automotive applications due to -40 to 125°C temp range, it's a small outline package with 8 terminals and pulse width modulation control.
TPS63000DRCR
TPS63000DRCR by Texas Instruments is a switching regulator with max output voltage of 5.5V, max output current of 2A, and max operating temp of 85°C. Ideal for industrial applications requiring efficient power conversion in a compact form factor.
LT8608EMSE#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE; Surface Mount: YES;
LM2596S-5.0
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LTM8055MPY#PBF
Analog Devices
Analog Devices LTM8055MPY#PBF is a switching regulator with 121 terminals, operating b/w -55 to 125°C. It uses current-mode control and pulse width modulation technique for buck-boost configuration. Ideal for military applications due to its robust design and wide input voltage range of 5-36V.
LM3478MM
LM3478MM by Texas Instruments is a switching controller with current-mode control technique. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output voltage of 500V and output current of 1A, it uses pulse width modulation at a frequency of up to 1000 kHz for buck-boost configurations.
LM2674M-12/NOPB
LM2674M-12/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a nominal output voltage of 12V. It operates in a temperature range from -40°C to 125°C, making it suitable for automotive applications. This small outline package has dual terminals and uses DMOS technology for efficient performance.
TPS54331DDA
TPS54331DDA by Texas Instruments is a switching regulator with a max output current of 3A and a control mode of current-mode. It operates in a temperature range from -40 to 150°C, making it suitable for automotive applications. With a compact package style and low profile design, it is ideal for space-constrained environments.
LMR38020SDDAR
LMR38020SDDAR by Texas Instruments is a switching regulator with 2A output current, 1V min output voltage, and 2200kHz max switching frequency. Ideal for applications requiring efficient power conversion in a compact design, such as portable electronics or industrial automation systems.
LM2594M-5.0
LM2594M-5.0 by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V, suitable for automotive applications. Operating b/w -40°C to 125°C, it has a control technique of pulse width modulation and a buck switcher configuration, making it ideal for various power supply designs in compact spaces.
LM27762DSST
LM27762DSST by Texas Instruments is a switching regulator with 2 outputs, max output current of 0.25A, and max switching frequency of 2200kHz. Ideal for industrial applications requiring pulse frequency modulation control technique in a small outline package with dual terminals.
LTC3646HDE-1#PBF
LTC3646HDE-1#PBF by Analog Devices is a current-mode switching regulator with 14 terminals, operating from -40 to 150°C. It has a buck configuration, supporting input voltages from 4V to 40V and output at 5V. Ideal for automotive applications due to its small size (4x3mm) and high max switching frequency of 3kHz.
LM5085MY/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
UC2825DW
Unitrode
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
EN6347QI
Altera
The EN6347QI by Altera is a voltage-mode switching regulator with a maximum output current of 4A. It has a package shape of rectangular and a terminal finish of matte tin. Its control technique is pulse width modulation and it operates at a temperature range of -40 to 85 degrees Celsius. This IC is suitable for industrial applications that require efficient power regulation.
ICL7660SCBAZ-T
Integrated Device Technology
SWITCHED CAPACITOR CONVERTER; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5085MME/NOPB
TPS60403DBVRG4
TPS60403DBVRG4 by Texas Instruments is a small outline, low profile switched capacitor converter with 5 terminals. It operates b/w -40 to 85°C, providing output voltage from -5.25V to -1.6V at max current of 0.06A. Ideal for industrial applications requiring compact and efficient power regulation.
LMR51420YDDCR
LMR51420YDDCR by Texas Instruments is a switching regulator with max output voltage of 34.2V and max current of 2A. Ideal for applications requiring pulse frequency modulation control technique, such as power management in compact electronic devices. Operates efficiently within temperature range of -40 to 150°C.
LTM4644IY-1#PBF
Analog Devices' LTM4644IY-1#PBF is a switching regulator with 77 terminals, operating b/w -40 to 125°C. It features a buck switcher config, PWM control mode, and supports input voltages from 4V to 14V. Ideal for automotive applications due to its high switching frequency of 1300 kHz and compact size of 15x9mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
MAX17502FATB+T
Analog Devices' MAX17502FATB+T is a current-mode switching regulator with a max output current of 1.9A and a buck switcher configuration. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications. With a wide input voltage range of 4.5V to 60V, it is ideal for various power management needs in compact designs.
Maxim Integrated
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX16904RAUE18/V+T
Analog Devices' MAX16904RAUE18/V+T is a 16-terminal switching regulator with current-mode control, operating b/w -40°C to 125°C. It features a max switching frequency of 2275 kHz and is designed for automotive applications due to its BICMOS technology and matte tin terminal finish.
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX1720EUTG
MAX1720EUTG by Onsemi is a small outline, thin profile switched capacitor converter with 6 terminals. It operates b/w -40 to 85°C and has a max switching frequency of 21 kHz. Ideal for industrial applications requiring a nominal input voltage of 5V and output voltage of -5.5V.
MAX1968EUI+T
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Analog Devices' MAX1968EUI+T is a 28-terminal switching regulator with a max output current of 4.5A and a max switching frequency of 1MHz. Ideal for industrial applications, it operates b/w -40°C to 85°C, featuring BICMOS technology and phase-shift control for efficient power management.
MAX1968EUI-T
MAX1968EUI-T by Maxim Integrated is a 28-terminal switching regulator with a max output current of 4.5A and max switching frequency of 1000kHz. Ideal for industrial applications, it operates b/w -40 to 85°C, with input voltage ranging from 3-5.5V, utilizing BICMOS technology for efficient performance.
MAX17502EATB+T
MAX17502EATB+T by Analog Devices is a current-mode switching regulator with 1A output, BICMOS technology, and 640 kHz max frequency. Ideal for automotive applications due to its -40 to 125°C operating range and small outline package. The device features dual terminals with nickel palladium gold finish in a rectangular plastic/epoxy body.
Switching Regulator or Controllers; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: SON; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX17760ATC+
SWITCHING REGULATOR; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
SWITCHING REGULATOR; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Matte Tin (Sn) - annealed;
MAX15062CATA+T
MAX15062CATA+T by Analog Devices is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It features a max output current of 0.62A, BUCK switcher config, and PWM control technique. Ideal for automotive applications due to its small size (2x2mm) and wide input voltage range of 4.5-60V.
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: VSON; Package Shape: SQUARE; Surface Mount: YES;
MAX17504ATP+T
Switching Regulator or Controllers; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
MAX17552AUB+T
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
Analog Devices' MAX17552AUB+T is a switching regulator with 10 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 54V and supports a wide input range from 4-60V, making it ideal for automotive applications. With a compact design (3x3mm) and high switching frequency of 2300kHz, it utilizes current-mode control for efficient power management.
MAX17552AUB+
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved