Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTC6992IS6-2#TRPBF by Analog Devices is a VCO with 6 terminals, operating from -40°C to 85°C. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs.
Median Price
$6.550
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$6.330
100+ parts
$4.090
1k+ parts
$3.790
10k+ parts
$3.630
Newark
$6.770
$4.380
$4.060
$3.880
Analog Devices Inc
$6.980
$3.332
$2.590
$2.813
DigiKey
$7.070
$4.590
$4.361
-
Verical
$2.480
Element14
$4.780
$3.960
Nova Conductors
$3.375
Digiode
$5.719
Vyrian
Chip Stock
Anansix
Semicontronic
$2.110
$2.057
$2.047
Ampacity Inc.
Corohmni
$2.490
Vigor
$2.540
Advanced Electronics
$2.724
$2.588
Continental Prestige Electronics
$3.308
Argo Parts USA
Netroflash
MARBEL Systems
$5.010
Corphita
$5.418
Texas Native Microelectronics
$5.759
$5.529
$5.356
$5.068
Kenton Components
$6.911
$6.082
Aztec Data Supply Inc.
$7.370
Qasali Group International
$15.549
$14.461
$13.683
Parana Technologies
$17.523
$16.296
IDEA Electronic Components Group
$18.842
$17.900
Microchip USA
$21.940
$21.800
$21.740
$21.670
DigiPath Technology Company
$29.394
$28.218
A-Z Elektronik GmbH
RC Electronics
Futuretech Components
Robosynatics
Lucentia Tech
This material is lightweight and resistant to corrosion, making the VCO durable and suitable for various applications.
Allows for flexibility in power supply options and compatibility with a wide range of systems.
Low power consumption, making it energy-efficient and ideal for battery-operated devices.
Provides precise frequency control and stability, essential for applications requiring accurate signal generation.
Offers multiple connection points for interfacing with other components, allowing for versatile integration.
Compact size enables space-saving design and facilitates installation in small electronic devices.
Can operate at low voltage levels, expanding compatibility with a variety of power sources.
High operating temperature range allows for reliable performance in challenging environmental conditions.
Provides fine-tuning capabilities for precise frequency modulation and adjustment.
Wide temperature range ensures consistent operation in extreme cold environments.
Ensures reliable electrical connections and solderability for secure terminal attachment.
Allows for a wide range of voltage control options, offering versatility in signal modulation.
Capable of producing ultra-low frequencies, suitable for a wide range of applications including communication systems and test equipment.
Enables easy and secure mounting on PCBs, simplifying assembly processes and improving product reliability.
Provides a high-frequency range for various signal processing applications, making the VCO versatile and adaptable to different needs.
VCO Voltage Controlled Oscillators LTC6992IS6-2#TRPBF attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from Analog Devices
Maximum Control Voltage:
Minimum Control Voltage:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Package Body Material:
Package Equivalence Code:
Physical Dimension:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
LTC6992IS6-2#TRPBF Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev Wafer Chgs 30/Jun/2020
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Intersil
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
1N4148WS
Weitron Technology
M39029/58360
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
Wuxi Xuyang Electronic
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
HMC583LP5E
Analog Devices
HMC583LP5E by Analog Devices is a VCO with 32 terminals, operating at frequencies b/w 11.5-12.8 GHz. It has a phase noise of -110 dBc/Hz and output power of 7 dBm, suitable for applications requiring precise frequency control in the GaAs technology field.
SN74LS624N3
Texas Instruments
SN74LS624N3 by Texas Instruments is a TTL VCO with 5V supply, operating at 25MHz. It has a max output low current of 24A and operates b/w 0-70°C. Ideal for applications requiring precise voltage-controlled oscillation in through-hole mounting setups.
HMC508LP5
Analog Devices' HMC508LP5 is a VCO with 5.25V max supply voltage, 280mA max supply current, and 12dBm output power. Ideal for applications requiring precise frequency control in the range of 7.3-8.2GHz, such as radar systems and communication equipment.
HMC584LP5ETR
Analog Devices' HMC584LP5ETR is a VCO with 13900 MHz nominal frequency, -110 dBc/Hz phase noise, and 7 dBm output power. It operates b/w -40 to 85 °C and requires 4.75-5.25 V supply voltage for applications like RF communication systems.
HMC515LP5ETR
Analog Devices' HMC515LP5ETR is a VCO with 5.25V max supply voltage, 240mA max supply current, and 6dBm output power. Ideal for applications requiring precise frequency control in the range of 11.5-12.5GHz, it offers -110dBc/Hz phase noise and operates b/w -40 to 85°C temperatures.
HMC732LC4B
Hittite Microwave
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Minimum Control Voltage: 0 V; Package Equivalence Code: LCC24,.16SQ,20; Offset Frequency: 10 kHz;
HMC511LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Operating Temperature: 85 Cel; Minimum Control Voltage: 2 V; Offset Frequency: 100 kHz;
HTO-2000R
Broadcom
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Phase Noise: -87 dBc/Hz; Nominal Supply Voltage: 15 V; Minimum Operating Frequency: 2000 MHz;
SN74LS624NSRE4
SN74LS624NSRE4 by Texas Instruments is a VCO with 14 terminals, operating b/w -55°C to 125°C. It has a supply voltage range of 4.5V to 5.5V and operates at frequencies from 0.000001 MHz to 20 MHz. Ideal for applications requiring precise voltage-controlled oscillation in various temperature conditions.
SN74LS625DR
SN74LS625DR by Texas Instruments is a VCO with 16 terminals, operating at 20MHz frequency. It has a supply voltage range of 4.75V to 5.25V and consumes up to 55mA current. Ideal for applications requiring precise voltage-controlled oscillation in temperature-sensitive environments.
HMC510LP5
HMC510LP5 by Analog Devices is a VCO with 5.25V max supply voltage, 360mA max supply current, and 10dBm output power. Ideal for applications requiring precise frequency control in the range of 8450MHz to 9550MHz. With -116 dBc/Hz phase noise, it offers high performance in compact dimensions of 5.1mm x 5.1mm x 1.0mm for surface mount installations.
ROS-2150VW+
Mini-circuits
Mini-circuits ROS-2150VW+ VCO features 2150 MHz nominal frequency, -70 dBc/Hz phase noise, and 4 dBm output power. Ideal for applications requiring precise voltage-controlled oscillation in a compact 12.7mm x 12.7mm x 4.57mm package with modulation sensitivity of 70 MHz/V.
HMC507LP5
Analog Devices' HMC507LP5 is a VCO with 32 terminals, operating b/w 6650-7650 MHz. It offers -115 dBc/Hz phase noise, 11 dBm output power, and requires 4.75-5.25V supply voltage at max 270mA current. Ideal for applications requiring precise frequency control in compact designs.
MAX2623EUA+
Analog Devices' MAX2623EUA+ is a VCO with -101 dBc/Hz phase noise, 11.5 mA supply current, and -8 dBm output power. Ideal for applications requiring a voltage-controlled oscillator in the frequency range of 855-950 MHz. Dimensions: 3.05mm x 3.05mm x 1.1mm, operating temperature: -40 to 85°C, control voltage range: 0.4V to 2.4V.
MTO-8155R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Power Variation: 2.5 dB; Phase Noise: -103 dBc/Hz; Maximum Supply Current: 50 mA;
V585ME11
Z-communications
V585ME11 by Z-communications is a VCO with Modulation Sensitivity of 40 MHz/V, Output Power of 6 dBm, and Phase Noise at -102 dBc/Hz. Ideal for applications requiring precise frequency control in the range of 1100 MHz to 1500 MHz. It operates on a Nominal Voltage of 10V and has compact dimensions of 12.7mm x 12.7mm x 5.588mm, suitable for surface mount installations.
HMC384LP4TR
Analog Devices' HMC384LP4TR is a VCO with 3.25V max supply voltage, -112 dBc/Hz phase noise, and 3.5 dBm output power. Ideal for applications requiring a voltage-controlled oscillator in the frequency range of 2050-2250 MHz, such as wireless communication systems or radar applications.
HMC507LP5ETR
Analog Devices' HMC507LP5ETR is a VCO with 5.25V max supply voltage, 270mA max supply current, and 11dBm output power. Ideal for applications requiring precise frequency control in the range of 6650MHz to 7650MHz.
HMC531LP5TR
Analog Devices' HMC531LP5TR is a VCO with 5.25V max supply voltage, 300mA max supply current, and 3dBm output power. Ideal for applications requiring precise frequency control in the range of 13.6-14.9GHz, such as radar systems and communication equipment.
SN74LS625J
VOLTAGE CONTROLLED OSCILLATOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
LTC6992CS6-1#TRMPBF
LTC6992CS6-1#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from 0 to 70°C. It has a voltage range of 0.1V to 0.9V and frequency range of 0.00000318 MHz to 1 MHz. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992IS6-1#TRMPBF
LTC6992IS6-1#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 85°C. It has a supply voltage range of 2.25V to 5.5V and operates b/w 0.00000318 MHz to 1 MHz. Ideal for applications requiring a compact surface-mount VCO with precise control over frequency modulation.
LTC6992HS6-1#TRMPBF
LTC6992HS6-1#TRMPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and consumes 0.45mA max current. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992CS6-1#TRPBF
LTC6992CS6-1#TRPBF by Analog Devices is a VCO with max supply voltage of 5.5V, operating freq range from 0.00000318 MHz to 1 MHz. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992CS6-2#TRMPBF
LTC6992CS6-2#TRMPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs.
LTC6992IS6-1#TRPBF
LTC6992IS6-1#TRPBF by Analog Devices is a VCO with 6 terminals, operating from -40°C to 85°C. It has a control voltage range of 0.1V to 0.9V and operates b/w 0.00000318 MHz to 1 MHz, making it suitable for applications requiring precise frequency control in compact designs.
LTC6992IS6-2#TRMPBF
LTC6992IS6-2#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40°C to 85°C. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs.
LTC6992CDCB-1#TRMPBF
LTC6992CDCB-1#TRMPBF by Analog Devices is a VCO with a max supply voltage of 5.5V and max supply current of 0.45mA. It is used as a voltage controlled oscillator in various applications such as communication systems and frequency synthesis.
LTC6992IDCB-1#TRMPBF
Analog Devices' LTC6992IDCB-1#TRMPBF is a VCO with 6 terminals, operating from 2.25V to 5.5V, offering a frequency range of 0.00000318MHz to 1MHz. Ideal for applications requiring voltage-controlled oscillators in compact surface-mount packages.
LTC6992CDCB-3#TRMPBF
LTC6992CDCB-3#TRMPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and consumes 0.45mA max current. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992CS6-4#TRMPBF
LTC6992CS6-4#TRMPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a voltage control range of 0.1V to 0.9V and operates b/w -40°C to 70°C. This surface mount oscillator is ideal for applications requiring precise frequency control in compact designs.
LTC6992CDCB-2#TRMPBF
LTC6992CDCB-2#TRMPBF by Analog Devices is a VCO with 6 terminals, operating freq. range of 0.00000318MHz to 1MHz. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs like communication systems and test equipment.
LTC6992HS6-1#TRPBF
LTC6992HS6-1#TRPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and consumes only 0.45mA max current, suitable for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992IS6-3#TRMPBF
LTC6992IS6-3#TRMPBF by Analog Devices is a VCO with max supply voltage of 5.5V, operating freq range from 0.00000318 MHz to 1 MHz. It's used in applications requiring voltage-controlled oscillators in compact surface mount packages.
LTC6992HS6-1#WTRMPBF
LTC6992HS6-1#WTRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 125°C. It has a supply voltage range of 2.25V to 5.5V and operates b/w 0.00000318 MHz to 1 MHz. Ideal for applications requiring a compact, low-power voltage-controlled oscillator in automotive or industrial settings.
LTC6990IS6#TRMPBF
Linear Technology
DIGITAL TUNED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Supply Voltage: 5.5 V;
LTC6990IS6#TRMPBF by Analog Devices is a VCO with max supply voltage of 5.5V, current of 0.283mA, and operating freq range from 0.000488 MHz to 2 MHz. Ideal for applications requiring digital tuned oscillators in compact designs with surface mounting feature.
LTC6992HS6-2#TRMPBF
LTC6992HS6-2#TRMPBF by Analog Devices is a VCO with a supply voltage range of 2.25V to 5.5V and a max operating frequency of 1MHz. It is commonly used in applications requiring voltage controlled oscillators, such as communication systems and frequency synthesizers.
LTC6990CS6#TRMPBF
DIGITAL TUNED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Maximum Operating Frequency: 2 MHz; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Supply Voltage: 5.5 V;
DIGITAL TUNED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Minimum Supply Voltage: 2.25 V; Additional Features: TAPE AND REEL; Maximum Operating Temperature: 70 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved