Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTC1983ES6-5#TRPBF by Analog Devices is a 6-terminal switched capacitor regulator with a nominal input voltage of 5V. It operates b/w 0-70°C, has a max switching frequency of 900 kHz, and is ideal for applications requiring small outline, thin profile regulators in commercial temperature grade environments.
Median Price
$5.858
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$4.520
100+ parts
$3.230
1k+ parts
$2.800
10k+ parts
$2.670
Arrow
$3.791
$3.370
-
Mouser Electronics
$6.080
$3.900
$3.610
$3.430
Newark
$6.510
$4.170
$3.870
$3.790
DigiKey
$6.650
$4.306
$4.162
Analog Devices Inc
$2.470
$3.777
Element14
$5.340
$5.200
Verical
$2.781
Farnell
$4.228
$3.385
$3.126
Nova Conductors
$3.225
Digiode
$3.955
Maritex
$7.565
$4.561
$3.884
Chip Stock
Sensible Micro Corp
Vyrian
Bristol Electronics
Anansix
QIE Inc.
Semicontronic
$2.360
$2.301
$2.289
Ampacity Inc.
Corohmni
$2.870
Argo Parts USA
Netroflash
$3.160
Corphita
$3.747
Vigor
$4.000
Continental Prestige Electronics
$5.070
$3.730
$2.680
MARBEL Systems
$9.138
Texas Native Microelectronics
$10.504
$10.084
$9.769
$9.244
Kenton Components
$12.605
$11.092
Parana Technologies
$14.968
$13.921
Aztec Data Supply Inc.
$15.750
IDEA Electronic Components Group
$16.095
$15.290
Advanced Electronics
$19.510
$17.754
$15.998
Microchip USA
$20.960
$20.830
$20.770
$20.700
DigiPath Technology Company
$25.108
$24.104
Qasali Group International
$28.361
$26.376
$24.958
Authorized Procurement Solutions
QUARKTWIN TECHNOLOGY LTD
A-Z Elektronik GmbH
Lixinc
Metaverse IC Inc.
Infinite Electronics LLP (Excess)
GreenTree Electronics
Futuretech Components
iodParts Technologies Inc.
Perfect Parts
Plastic and epoxy material provides durability and protection for the internals of the product, making it a reliable choice for long-term use.
Surface mount capability allows for easy and efficient installation on circuit boards, saving time and effort during assembly.
Rectangular shape makes it easy to design the product into various electronic devices and ensures efficient use of space on the circuit board.
Having 6 terminals allows for multiple connection points, increasing the versatility and functionality of the product.
High maximum operating temperature ensures reliable performance even in demanding conditions, making it suitable for a wide range of applications.
Low minimum operating temperature ensures the product can function in colder environments without issue, increasing its usability.
Matte tin finish provides excellent conductivity and solderability, ensuring strong connections and reliable performance.
High maximum switching frequency allows for efficient power conversion, reducing electromagnetic interference and improving overall performance.
Switching Regulators & Controllers LTC1983ES6-5#TRPBF attributes and parameters. Explore more Switching Regulators & Controllers devices from Analog Devices
Other IC type:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LTC1983ES6-5#TRPBF Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14+
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
Synsemi
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Protek Devices
ABS06-32.768KHZ-T
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
Tak Cheong Electronics Holdings
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
Philips Components
TPS40210DGQ
Texas Instruments
TPS40210DGQ by Texas Instruments is a switching regulator with a max output current of 0.4A and a control mode of current-mode PWM. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various power management applications. With a compact square package style and surface-mount design, it offers efficient voltage regulation for systems requiring an input voltage range of 4.5V to 52V and an output voltage b/w 7V to 9V.
LTC1983ES6-5#TRMPBF
Analog Devices
LTC1983ES6-5#TRMPBF by Analog Devices is a small outline, thin profile switched capacitor regulator with 6 terminals. It operates b/w 0-70°C and has a max switching frequency of 900 kHz. Ideal for applications requiring a nominal input voltage of 5V, such as portable electronic devices.
UC2825DW
UC2825DW by Texas Instruments is a current-mode switching controller with a 2A output current and 1000 kHz max switching frequency. Ideal for industrial applications, it operates b/w -40 to 85°C, with a nominal input voltage of 15V and min supply voltage of 9.2V. The package style is small outline, making it suitable for compact designs.
LMZ10501SILT
LMZ10501SILT by Texas Instruments is a switching regulator with 1A output current, 3.6V max output voltage, and 2250kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design with small outline package style.
LMZM23601V5SILT
LMZM23601V5SILT by Texas Instruments is a switching regulator with a max output current of 1A and max output voltage of 15V. Ideal for automotive applications, it operates b/w -40 to 125°C, offering a control mode of current-mode PWM. With a compact package style and high switching frequency of 1100kHz, it suits space-constrained designs requiring efficient power management.
LM2596T-5.0/NOPB
Switching Regulator or Controllers; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Qualification: Not Qualified;
L5973D
STMicroelectronics
L5973D by STMicroelectronics is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 3.5A and operates at a frequency of up to 280 kHz. Ideal for automotive applications due to its MOS technology and buck switcher configuration.
LM5008AMMX/NOPB
LM5008AMMX/NOPB by Texas Instruments is a switching regulator with a max output current of 0.35 A and a max input voltage of 95 V. It is commonly used in automotive applications due to its temperature grade and small package size.
LM5117PMHX/NOPB
Switching Regulator or Controllers; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Qualification: Not Qualified;
LT8614IUDC#TRPBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 18; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS54140ADGQ
TPS54140ADGQ by Texas Instruments is a switching regulator with 1.5A max output current, 39V max output voltage, and 2500 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design with small outline package style.
LMZ14203HTZX/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Maximum Switching Frequency: 1000 kHz; Terminal Finish: MATTE TIN; Maximum Output Current: 3 A;
UCC28C45DRG4
UCC28C45DRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and max switching frequency of 1000kHz. It operates in industrial temperature grade range from -40 to 105°C, making it suitable for various power management applications requiring precise control and efficiency. The small outline package with gull wing terminals and pulse width modulation control technique enhances its versatility in compact designs.
LM2733YMF/NOPB
LM2733YMF/NOPB by Texas Instruments is a switching regulator with 5 terminals, operating temperature range of -40 to 125°C, and output voltage ranging from 3V to 40V. It is ideal for automotive applications due to its compact size, low profile design, and current-mode control technique. With a max output current of 1.5A and switching frequency of up to 1850 kHz, it offers efficient power management in various electronic systems.
LTC3646IDE#PBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2594HVM-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5116MH/NOPB
LM5116MH/NOPB by Texas Instruments is a switching controller with 20 terminals, operating b/w -40 to 150°C. It supports a max output voltage of 80V and current up to 20A, making it ideal for automotive applications requiring high efficiency and precise current-mode control at frequencies up to 1MHz.
TPS560430YDBVR
TPS560430YDBVR by Texas Instruments is a switching regulator with 0.6A output current, 1V min output voltage, and 2100kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design.
TPS61200DRCR
TPS61200DRCR by Texas Instruments is a switching regulator with a nominal input voltage of 1.2V and max output voltage of 5.5V, suitable for battery charge control applications. It operates in boost configuration with a max output current of 1.5A and features pulse width modulation control technique, making it ideal for industrial use at temperatures ranging from -40 to 85°C.
UCC28180DR
UCC28180DR by Texas Instruments is a current-mode power factor controller with a max operating temperature of 125°C. It features a switching frequency of 250 kHz and is suitable for boost switcher configurations in automotive applications. The package style is small outline, making it ideal for surface mount designs with 8 terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
SWITCHED CAPACITOR REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC1144IS8#PBF
LTC1144IS8#PBF by Analog Devices is a CMOS switched capacitor converter with 8 terminals, operating b/w -40 to 85°C. It has a max input voltage of 18V and nominal input voltage of 15V, suitable for industrial applications. With a small outline package style and surface mount capability, it offers a max switching frequency of 10 kHz.
SWITCHED CAPACITOR CONVERTER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC1144IS8#TRPBF
LTC1144IS8#TRPBF by Analog Devices is a small outline switched capacitor converter with a max input voltage of 18V and operating temperature range from -40 to 85°C. It features a CMOS technology, dual terminal position, and operates at a max switching frequency of 10 kHz. Ideal for industrial applications requiring efficient power regulation in compact spaces.
LTC1983ES6-5#TRPBF
LTC1983ES6-3#TRMPBF
LTC1983ES6-3#TRMPBF by Analog Devices is a CMOS switched capacitor regulator with 6 terminals, operating at -40 to 70°C. It has a nominal input voltage of 5V and output voltage of -3V, suitable for applications requiring a max switching frequency of 900 kHz in commercial-grade environments. The small outline package with gull wing terminals makes it ideal for space-constrained designs.
LTC1923EGN#PBF
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC1983ES6-3#TRPBF
LTC1983ES6-3#TRPBF by Analog Devices is a SWITCHED CAPACITOR REGULATOR with input voltage range of 3-5.5V and max switching frequency of 900kHz. It comes in a small outline package suitable for commercial applications requiring efficient power regulation in compact spaces. With surface mount capability, it offers precise control over output voltages for various electronic devices.
LTC1144CS8#PBF
LTC1144CS8#PBF by Analog Devices is a CMOS switched capacitor converter with 8 terminals and a small outline package. It operates b/w 0-70°C, accepts input voltages from 2-18V, and has a max switching frequency of 10 kHz. Ideal for applications requiring efficient voltage regulation in compact spaces.
SWITCHED CAPACITOR CONVERTER; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC1983ES6-5#PBF
LTC1983ES6-5#PBF by Analog Devices is a small outline, very thin profile switched capacitor regulator with 6 terminals. It operates b/w 0-70°C, has a max output current of 0.125A, and a max switching frequency of 900kHz. Ideal for applications requiring efficient power regulation in compact spaces.
LTC1983ES6-3#PBF
LTC1983ES6-3#PBF by Analog Devices is a CMOS switched capacitor regulator with 0.125A output current, suitable for commercial applications. It operates b/w 0-70°C, accepts input voltage from 3-5.5V, and has a max switching frequency of 900kHz. Ideal for compact designs requiring efficient power regulation in small outline packages.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved