Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LT3502EDC#TRPBF by Analog Devices is a switching regulator with max output current of 1.1A and max input voltage of 40V. It operates in buck configuration, uses pulse width modulation control technique, and has a max switching frequency of 1400kHz. Ideal for applications requiring efficient power conversion in compact spaces.
Median Price
$5.670
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Verical
1+ parts
$3.063
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$3.944
$3.193
$3.015
$3.014
Arrow
$4.881
$3.729
$3.683
Farnell
$5.570
$3.220
$2.810
Mouser Electronics
$3.980
$3.890
$3.710
DigiKey
$6.420
$4.151
$4.131
$3.641
Newark
$6.610
$4.270
$4.250
Analog Devices Inc
$7.200
$3.454
$2.700
$2.938
Element14
$5.690
$5.110
Nova Conductors
$3.525
Digiode
$3.549
Maritex
$7.502
$3.973
$3.547
Vyrian
Chip Stock
Cyclops Electronics Ltd
Anansix
IBS Electronics
$3.089
Ampacity Inc.
$2.370
Semicontronic
$2.311
$2.299
MARBEL Systems
$3.002
Corphita
$3.362
Texas Native Microelectronics
$3.451
$3.313
$3.209
$3.037
Netroflash
Argo Parts USA
Kenton Components
$4.141
$3.644
Aztec Data Supply Inc.
$6.360
Qasali Group International
$9.318
$8.665
$8.200
Parana Technologies
$11.659
$10.843
IDEA Electronic Components Group
$12.537
$11.910
Corohmni
$13.992
DigiPath Technology Company
$19.558
$18.775
Microchip USA
$22.910
$22.770
$22.700
$22.630
Lixinc
RC Electronics
GreenTree Electronics
Continental Prestige Electronics
$4.070
$2.930
Glotronic Ltd.
Authorized Procurement Solutions
A-Z Elektronik GmbH
Perfect Parts
This material provides durability and protection for the internal components, ensuring the product has a long lifespan.
Allows for easy installation on circuit boards, saving time and effort during assembly.
The square shape allows for efficient use of space on the circuit board, optimizing the layout.
Can operate at high temperatures without overheating, ensuring reliable performance in various environments.
Provides precise control over the output current, allowing for accurate regulation of power.
Can operate in low temperature conditions, making it suitable for a wide range of applications.
Capable of delivering a high output current, making it suitable for powering various components in a circuit.
Switching Regulators & Controllers LT3502EDC#TRPBF attributes and parameters. Explore more Switching Regulators & Controllers devices from Analog Devices
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LT3502EDC#TRPBF Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
General Semiconductor
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Surge Components
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
NE555D
Philips Semiconductors
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
World Products
Comchip Technology
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
NCP3063BMNTXG
NCP3063BMNTXG by Onsemi is a current-mode switching regulator with 1.5A output, operating from -40 to 125°C. Ideal for automotive applications, it supports input voltage range of 5-40V and offers hysteric control at 190kHz frequency in a small outline package.
LM2675N-5.0/NOPB
LM2675N-5.0/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output voltage of 37V and can handle up to 1A output current. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
FAN2001MPX
FAN2001MPX by Onsemi is a switching regulator with 2A output current and 1500kHz max switching frequency. Ideal for industrial applications, it operates b/w -40 to 85°C, in a square package style with 6 terminals for surface mount assembly.
TPS54302DDCT
TPS54302DDCT by Texas Instruments is a switching regulator with 3A output current, 400kHz max frequency, and 125°C operating temp. Ideal for automotive applications due to its buck switcher config, PWM control technique, and wide input voltage range of 4.5V to 28V.
LM2678S-ADJ/NOPB
LM2678S-ADJ/NOPB by Texas Instruments is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and output voltage ranging from 1.23V to 37V. It is ideal for automotive applications due to its small outline package style and pulse width modulation control technique at a max output current of 5A.
LM2674MX-3.3/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AP63200WU-7
Diodes Incorporated
SWITCHING REGULATOR; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;
LM3481MMX/NOPB
LM3481MMX/NOPB by Texas Instruments is a switching controller with a max output current of 1A and a max output voltage of 500V. It operates in current-mode control technique, suitable for automotive applications due to its wide temperature range. The package style is small outline with thin profile, making it ideal for space-constrained designs.
LM2671M-5.0/NOPB
LM2671M-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a nominal output voltage of 5V, suitable for automotive applications. It operates b/w -40 to 125°C, has a buck switcher configuration, and supports pulse width modulation control technique up to 400kHz frequency.
TPS54302DDCR
TPS54302DDCR by Texas Instruments is a switching regulator with 3A output current, 400kHz max frequency, and -40 to 125°C operating temp. Ideal for automotive applications due to its compact size, PWM control mode, and buck switcher configuration.
TPS560430XDBVR
TPS560430XDBVR by Texas Instruments is a switching regulator with a max output current of 0.6A and a max output voltage of 24V. It operates in buck configuration, supports pulse frequency modulation control technique, and has a small outline package style suitable for automotive applications.
LMZ14203HTZ
LMZ14203HTZ by Texas Instruments is a voltage-mode switching regulator with 3A output current, ideal for automotive applications. It operates b/w -40°C to 125°C, accepting input voltages from 6V to 72V and providing a stable 12V output. This small outline package with gull wing terminals is surface mountable and designed for efficient power management in compact spaces.
LMZ10500SILR
LMZ10500SILR by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output voltage range from 0.6V to 3.6V. Ideal for automotive applications due to its compact size (3x2.6mm) and current-mode control technique with a max output current of 0.65A at a switching frequency of up to 2250kHz.
LM5118MH/NOPB
LM5118MH/NOPB by Texas Instruments is a switching regulator with 20 terminals, operating temperature range of -40 to 125°C, and output voltage up to 70V. Ideal for automotive applications, it features current-mode control, PWM technique, and buck-boost configuration for efficient power management in compact designs.
AP3012KTR-G1
Bcd Semiconductor Manufacturing
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2594M-5.0
LM2594M-5.0 by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V, suitable for automotive applications. Operating b/w -40°C to 125°C, it has a control technique of pulse width modulation and a buck switcher configuration, making it ideal for various power supply designs in compact spaces.
LM2733XMF/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2676S-5.0/NOPB
LM2676S-5.0/NOPB by Texas Instruments is a switching regulator with 7 terminals, VOLTAGE-MODE control, and 5.4A output current. Ideal for automotive applications, it operates b/w -40 to 125°C, offering a wide input voltage range of 8-40V and an output voltage of 5V at a max frequency of 260 kHz.
LM5156HQPWPRQ1
LM5156HQPWPRQ1 by Texas Instruments is a switching controller with a 12V nominal input voltage and 300V max output voltage. It operates in automotive-grade temperatures from -40°C to 150°C, making it suitable for various automotive applications. With a compact package style and high switching frequency of 2200 kHz, it offers efficient power management solutions.
MC33063AP1G
Shenzhen Changyuntong Ic Design
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
Analog Devices
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
LT3508EFE#PBF
Linear Technology
DUAL SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Analog Devices' LT3508EFE#PBF is a current-mode switching regulator with 3.2A output current, 1060kHz max switching frequency, and 36V max input voltage. Ideal for applications requiring efficient power conversion in a compact form factor.
LT3508IFE#PBF
DUAL SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LT3508IFE#PBF by Analog Devices is a current-mode switching regulator with a max output current of 3.2A and a wide input voltage range from 3.7V to 36V. It operates at temperatures ranging from -40°C to 125°C, making it suitable for automotive applications requiring high efficiency and compact design. The package style is small outline with gull wing terminals, ideal for space-constrained environments where pulse width modulation control technique is needed.
LT3580EMS8E#PBF
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: SQUARE; Surface Mount: YES;
Analog Devices' LT3580EMS8E#PBF is a current-mode switching regulator with 2.8A output current and 2500kHz max switching frequency. Ideal for boost applications, it operates b/w 0-125°C, accepts input voltage from 2.5V to 32V, and comes in a small outline package suitable for surface mounting.
LT3502AIDC#TRMPBF
LT3502AIDC#TRMPBF by Analog Devices is a switching regulator with 1.1A output current, 2800 kHz max frequency, and 10-40V input voltage range. It features a small outline package style and pulse width modulation control technique. Ideal for applications requiring efficient power conversion in compact spaces.
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES; Maximum Output Current: 1.1 A;
LT3580EMS8E#TRPBF
Analog Devices' LT3580EMS8E#TRPBF is a current-mode switching regulator with 2.8A output current, 2500kHz max switching frequency, and boost configuration. Ideal for applications requiring efficient power conversion in a compact form factor, such as portable electronics and battery-powered devices. Operating temperature range from 0°C to 125°C makes it suitable for various environments.
LT3508EFE#TRPBF
LT3508EFE#TRPBF by Analog Devices is a current-mode switching regulator with 3.2A output current and 1060kHz switching frequency. It operates b/w 3.7V to 36V input voltage range, making it ideal for various applications requiring efficient power management in compact spaces. The small outline package with dual terminals and pulse width modulation control technique ensures reliable performance in diverse electronic designs.
LT3507EUHF#PBF
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
LT3507EUHF#PBF by Analog Devices is a current-mode switching regulator with 6A output current, 2500 kHz max switching frequency, and 12V nominal input voltage. It is ideal for applications requiring high efficiency power conversion in compact spaces due to its very thin profile chip carrier package style.
LT3502AIDC#TRPBF
LT3502AIDC#TRPBF by Analog Devices is a switching regulator with 1.1A output current, 2800kHz max frequency, and -40 to 125°C operating temp range. Ideal for automotive applications due to its small outline package and pulse width modulation control technique.
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
LT3580IMS8E#PBF
LT3580IMS8E#PBF by Analog Devices is a switching regulator with 2.8A output current and 2500kHz max switching frequency. Ideal for automotive applications, it operates b/w -40 to 125°C, with input voltage range of 2.5-32V and control mode in current-mode PWM technique.
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: SQUARE; Surface Mount: YES;
LT3501EFE#PBF
DUAL SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved