Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LT3050IMSE#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max dropout voltage of 0.55V and a max input-output voltage differential of 45V. It is designed for applications requiring precise voltage regulation in compact spaces, such as portable electronic devices.
Median Price
$2.793
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Anansix
One Stop Electronics
$2.500
Semicontronic
$2.438
$2.425
Vigor
$2.580
Corphita
$2.646
Corohmni
$2.940
Parana Technologies
$7.831
$7.282
IDEA Electronic Components Group
$8.420
$7.999
MARBEL Systems
$8.552
Texas Native Microelectronics
$9.830
$9.437
$9.142
$8.650
AZTECH Wire
$11.667
Kenton Components
$11.796
$10.380
DigiPath Technology Company
$13.135
$12.610
Qasali Group International
$26.541
$24.683
$23.356
A-Z Elektronik GmbH
Lightweight and durable material for the package, making it suitable for various applications.
Low dropout voltage ensures efficient regulation of output voltage even when the input voltage is slightly lower.
Ease of installation and PCB layout integration with surface mount technology.
Wide operating temperature range for reliable performance in different environmental conditions.
Can handle high differential voltage inputs for versatility in power supply applications.
Compact rectangular shape for efficient space utilization on the PCB.
Gull wing terminals for easy soldering and secure electrical connections.
Wide temperature range for reliable operation even in extreme cold conditions.
Low minimum output voltage for precision voltage regulation in low power applications.
Sufficient terminals for connecting to external components and circuitry.
Compact package style with heat sink and thin profile for efficient heat dissipation and space-saving design.
Fine terminal pitch for high-density PCB layouts and compact design.
Low minimum differential voltage requirement for efficient operation in various power supply scenarios.
Adjustable regulator with low dropout and positive output for precise voltage regulation.
Matte tin finish for reliable electrical connections and corrosion resistance.
Dual terminal position for easy mounting and secure attachment to the PCB.
High maximum output voltage for flexibility in powering various electronic components.
Low profile design for compact and space-saving integration in electronic devices.
Narrow width for efficient PCB integration and space optimization.
High maximum output current for powering various loads and components with stability.
Can withstand peak reflow temperature for proper soldering and assembly processes.
High peak reflow temperature capability for reliable soldering and assembly in manufacturing.
Compact length for space-saving integration in electronic devices and PCB layouts.
Adjustable Regulators - Positive Single Output LDO LT3050IMSE#TRPBF attributes and parameters. Explore more Adjustable Regulators - Positive Single Output LDO devices from Analog Devices
Maximum Dropout Voltage-1:
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LT3050IMSE#TRPBF Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
LM2941S/NOPB
Texas Instruments
LM2941S/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a dropout voltage of 1V. It is commonly used in applications requiring stable voltage regulation, such as power supplies and battery chargers.
LT3080EMS8E#TRPBF
Analog Devices
LT3080EMS8E#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 36V and a max output current of 1.1A. It operates in a temperature range from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style includes a small outline, heat sink/slug, thin profile, and shrink pitch design for efficient thermal management.
LM2941CSX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Package Equivalence Code: SMSIP5H,.6,67TB; Maximum Line Regulation (%/V): .032;
LDL212PUR
STMicroelectronics
STMicroelectronics' LDL212PUR is an adjustable positive single output LDO regulator with a max output current of 1.2A and a max dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3045IMSE#TRPBF
LT3045IMSE#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5 A and a max dropout voltage of 0.45 V. It is commonly used in applications requiring stable voltage regulation, such as power supplies for sensitive electronic devices.
LP2951ACSD
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.5 %;
PTPS7B8401QWDRBRQ1
PTPS7B8401QWDRBRQ1 by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 18V and a max input voltage of 40V. It features a small outline package style, operates in temperatures ranging from -40 to 150°C, and has excellent load regulation at 0.2%. Ideal for applications requiring precise voltage regulation in automotive electronics and industrial control systems.
LT3085EDCB#PBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Package Equivalence Code: SOLCC6,.12,20; Operating Temperature (TJ-Max): 125 Cel;
LT3042EMSE#TRPBF
Analog Devices' LT3042EMSE#TRPBF is an adjustable positive single output LDO regulator with a max output current of 0.2A and a max output voltage of 15V. This surface-mount device, suitable for various applications, operates within a temperature range of -40 to 125°C.
LTC3025EDC-1#TRMPBF
LTC3025EDC-1#TRMPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 3.6V and a max output current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with very thin profile, ideal for surface mount designs where space is limited.
TPS7A4701RGWR
TPS7A4701RGWR by Texas Instruments is an adjustable regulator with a max output current of 1A and a dropout voltage of 0.45V. It is commonly used in applications requiring stable power supply, such as industrial automation and telecommunications equipment.
LT3080EDD#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Output Voltage-1: 36 V; Qualification Status: Not Qualified;
TPS7A2501DRVR
TPS7A2501DRVR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.3 A and a max input voltage of 18 V. It features a small outline package style, making it suitable for applications requiring precise voltage regulation in compact spaces. With an operating temperature range from -40 to 125°C, this regulator is ideal for various electronic devices and systems.
LM2941CS/NOPB
LM2941CS/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a dropout voltage of 1V. It operates b/w -40 to +125°C, making it suitable for various applications requiring stable voltage regulation in harsh environments.
NCP600SNADJT1G
NCP600SNADJT1G by Onsemi is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max dropout voltage of 0.25V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3088EDD#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Pitch: .5 mm; No. of Functions: 1;
MIC2941AWU-TR
Micrel
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Output Voltage-1: 26 V; JESD-609 Code: e3;
MIC29302WU
Rochester Electronics
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; No. of Functions: 1; Minimum Output Voltage-1: 1.25 V;
LT3085EDCB#TRPBF
LT3085EDCB#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It has a package style of small outline, heat sink/slug, very thin profile, making it suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature ranges from -40 to 125°C ensure reliable performance in various environments.
LT3045IMSE-1#PBF
Analog Devices' LT3045IMSE-1#PBF is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. This surface-mount device, suitable for applications requiring precise voltage regulation, operates in temperatures ranging from -40 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
LT3045EDD#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Length: 3 mm; Width: 3 mm;
LT3045EDD#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3045EDD-1#PBF
LT3045EDD-1#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It is suitable for applications requiring precise voltage regulation in compact spaces, such as portable electronic devices or IoT sensors.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HVSON; Terminal Form: NO LEAD; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE; Package Shape: SQUARE;
LT3045EMSE#PBF
LT3045EMSE#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It is designed for applications requiring precise voltage regulation in a compact package, suitable for surface mount assembly and operating temperatures ranging from -40 to 125°C.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HTSSOP; Terminal Form: GULL WING; JESD-609 Code: e3; Terminal Pitch: .65 mm;
LT3045IDD#PBF
LT3045IDD#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It is designed for applications requiring precise voltage regulation in compact spaces, featuring a small outline package style and dual terminal position for surface mount assembly.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Minimum Output Voltage-1: 0 V; Moisture Sensitivity Level (MSL): 1;
LT3080EST#PBF
Analog Devices' LT3080EST#PBF is an adjustable positive single output LDO regulator with a max output voltage of 36V and a dropout voltage as low as 0.35V. This bipolar technology regulator operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Operating Temperature (TJ-Max): 125 Cel; Peak Reflow Temperature (C): 260;
LT3045EDD#TRPBF
LT3045EDD#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It is designed for applications requiring precise voltage regulation in a compact package, suitable for surface mount assembly with a small outline and very thin profile. Operating temperature ranges from -40 to 125°C make it versatile for various electronic devices.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Minimum Output Voltage-1: 0 V; Terminal Pitch: .5 mm;
LT3045IDD#TRPBF
LT3045IDD#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Output Current-1: .5 A; No. of Functions: 1;
LT3045IDD-1#PBF
LT3045IDD-1#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It is designed for applications requiring precise voltage regulation in compact spaces, such as portable electronic devices or IoT sensors.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Dropout Voltage-1: .45 V; Operating Temperature (TJ-Min): -40 Cel;
LT3045HDD#PBF
LT3045HDD#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Width: 3 mm; Peak Reflow Temperature (C): NOT SPECIFIED;
LT3045IMSE#PBF
LT3045IMSE#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It is designed for applications requiring precise voltage regulation in compact spaces, featuring a small outline package style suitable for surface mount assembly.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HTSSOP; Terminal Form: GULL WING; Terminal Finish: MATTE TIN; Operating Temperature (TJ-Min): -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved