Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' LT3045IDD-1#TRPBF is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Median Price
$5.187
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$5.835
Vyrian
Anansix
Digiode
SPM Sales
MARBEL Systems
$2.019
Texas Native Microelectronics
$2.321
$2.228
$2.159
$2.042
Kenton Components
$2.785
$2.451
Semicontronic
$4.410
$4.300
$4.278
Ampacity Inc.
Advanced Electronics
$5.699
$5.414
Continental Prestige Electronics
$5.718
Netroflash
$5.543
$5.427
Qasali Group International
$6.267
$5.828
$5.515
Parana Technologies
$7.514
$6.988
Corohmni
$7.730
IDEA Electronic Components Group
$8.080
$7.676
Aztec Data Supply Inc.
$9.120
One Stop Electronics
$9.600
DigiPath Technology Company
$12.605
$12.101
Lixinc
Corphita
Argo Parts USA
This material provides good durability and protection for the regulator, making it a reliable choice for long-term use.
Low dropout voltage ensures efficient regulation of output voltage, making this regulator suitable for applications requiring precise voltage control.
Surface mount capability makes it easy to integrate this regulator into a circuit board, saving space and simplifying assembly.
Wide operating temperature range allows the regulator to function effectively in various environmental conditions, increasing its versatility.
Square shape helps with easy mounting and provides a compact form factor, ideal for space-constrained applications.
No lead terminals reduce the risk of solder joint failure, ensuring reliable electrical connections.
Wide temperature range allows the regulator to function in extreme cold conditions, enhancing its usability in a variety of settings.
TR packing method offers efficient handling and storage of the regulators, making them suitable for automated assembly processes.
Ability to provide an output voltage as low as 0V makes this regulator versatile for applications requiring a wide range of voltage levels.
Higher number of terminals allows for more connections and greater flexibility in circuit design, accommodating complex systems.
Compact design with heat sink capability and a thin profile makes this regulator suitable for applications where space and heat dissipation are critical.
Close terminal pitch enables high-density mounting and allows for efficient use of PCB space, making this regulator suitable for miniaturized designs.
Adjustable regulator provides flexibility in setting the output voltage as needed, while LDO technology ensures low dropout voltage for efficient performance.
Matte tin finish provides good solderability and corrosion resistance, enhancing the reliability and longevity of the regulator.
Dual terminal positions provide additional flexibility in PCB layout and enable different mounting options, improving compatibility with various circuit designs.
High maximum output voltage allows this regulator to support a wide range of applications, making it versatile for different voltage requirements.
Low seated height makes this regulator suitable for slim and compact devices, ensuring easy integration into space-constrained designs.
Slim width allows for efficient use of PCB space, making this regulator ideal for compact electronic devices.
High maximum output current capability enables the regulator to power a variety of components, making it suitable for diverse applications.
Compact length allows for space-saving mounting options, making this regulator suitable for small form factor designs.
Adjustable Regulators - Positive Single Output LDO LT3045IDD-1#TRPBF attributes and parameters. Explore more Adjustable Regulators - Positive Single Output LDO devices from Analog Devices
Maximum Dropout Voltage-1:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Packing Method:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
LT3045IDD-1#TRPBF Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
STMicroelectronics
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
LT3086ET7#PBF
LT3086ET7#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 2.1A and a max output voltage of 32V. It features a low dropout voltage of 0.33V, making it suitable for applications requiring precise voltage regulation in various electronic devices. The package style is flange mount, and it has a terminal finish of matte tin over nickel, ideal for surface mount applications in temperature ranges from -40°C to 125°C.
TPS76801QPWP
TPS76801QPWP by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a min input voltage of 2.7V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. Its small outline package with gull wing terminals and thin profile design enhances thermal performance and reliability in surface-mount applications.
ADP1741ACPZ-R7
ADP1741ACPZ-R7 by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 2A and dropout voltage of 0.28V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TL1963AKTTRG3
TL1963AKTTRG3 by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1.5A and a dropout voltage of 0.55V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
MAX38904BATD+T
Maxim Integrated
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 14; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Time At Peak Reflow Temperature (s): 30; Operating Temperature (TJ-Min): -40 Cel;
LT3045EMSE-1#PBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HTSSOP; Terminal Form: GULL WING; Length: 4.039 mm; Maximum Output Voltage-1: 15 V;
TPS7A4201DGNR
TPS7A4201DGNR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 26V and a dropout voltage of 1.3V. Operating temperature ranges from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
ADM7151ACPZ-02-R7
ADM7151ACPZ-02-R7 by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.8A and operating temperature range from -40 to 125°C. Its small outline package style, surface mount capability, and dual terminal position make it ideal for compact electronic devices requiring precise voltage regulation.
NCP603SNADJT1G
NCP603SNADJT1G by Onsemi is an adjustable positive single output LDO regulator with a max output current of 0.3A and a dropout voltage of 0.48V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3080EDD-1#PBF
LT3080EDD-1#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max dropout voltage of 0.5V and a max output voltage of 36V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3065EDD#TRPBF
LT3065EDD#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 40V and a max dropout voltage of 0.51V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS73701DCQR
TPS73701DCQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a dropout voltage of 0.5V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LT3014IDD#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Finish: Matte Tin (Sn); Moisture Sensitivity Level (MSL): 1;
LT1761ES5-BYP
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Minimum Output Voltage-1: 1.22 V; Terminal Pitch: .95 mm;
LM1084ISX-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY; Moisture Sensitivity Level (MSL): 3;
LT3088HDD#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Minimum Output Voltage-1: 0 V; Package Shape: SQUARE;
LTC3025IDC-1#TRPBF
LTC3025IDC-1#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.17V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LTC3025EDC-1#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Packing Method: TR; Terminal Finish: Matte Tin (Sn);
TL1963AQKTTRQ1
TL1963AQKTTRQ1 by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1.5 A and a max dropout voltage of 0.55 V. It is commonly used in automotive applications due to its AEC-Q100 screening level and operating temperature range of -40°C to 125°C.
LT1963AEFE#PBF
LT1963AEFE#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 1.5A and a dropout voltage of 0.55V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
LT3045EDD#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Length: 3 mm; Width: 3 mm;
LT3045EDD#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3045EDD-1#PBF
LT3045EDD-1#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It is suitable for applications requiring precise voltage regulation in compact spaces, such as portable electronic devices or IoT sensors.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HVSON; Terminal Form: NO LEAD; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE; Package Shape: SQUARE;
LT3045EMSE#PBF
LT3045EMSE#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It is designed for applications requiring precise voltage regulation in a compact package, suitable for surface mount assembly and operating temperatures ranging from -40 to 125°C.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HTSSOP; Terminal Form: GULL WING; JESD-609 Code: e3; Terminal Pitch: .65 mm;
LT3045IDD#PBF
LT3045IDD#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It is designed for applications requiring precise voltage regulation in compact spaces, featuring a small outline package style and dual terminal position for surface mount assembly.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Minimum Output Voltage-1: 0 V; Moisture Sensitivity Level (MSL): 1;
LT3080EST#PBF
Analog Devices' LT3080EST#PBF is an adjustable positive single output LDO regulator with a max output voltage of 36V and a dropout voltage as low as 0.35V. This bipolar technology regulator operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Operating Temperature (TJ-Max): 125 Cel; Peak Reflow Temperature (C): 260;
LT3045EDD#TRPBF
LT3045EDD#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It is designed for applications requiring precise voltage regulation in a compact package, suitable for surface mount assembly with a small outline and very thin profile. Operating temperature ranges from -40 to 125°C make it versatile for various electronic devices.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Minimum Output Voltage-1: 0 V; Terminal Pitch: .5 mm;
LT3045IDD#TRPBF
LT3045IDD#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Output Current-1: .5 A; No. of Functions: 1;
LT3045IDD-1#PBF
LT3045IDD-1#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It is designed for applications requiring precise voltage regulation in compact spaces, such as portable electronic devices or IoT sensors.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Dropout Voltage-1: .45 V; Operating Temperature (TJ-Min): -40 Cel;
LT3045HDD#PBF
LT3045HDD#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Width: 3 mm; Peak Reflow Temperature (C): NOT SPECIFIED;
LT3045IMSE#PBF
LT3045IMSE#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It is designed for applications requiring precise voltage regulation in compact spaces, featuring a small outline package style suitable for surface mount assembly.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HTSSOP; Terminal Form: GULL WING; Terminal Finish: MATTE TIN; Operating Temperature (TJ-Min): -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved