Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' LT3008IDC-2.5#TRMPBF is a fixed positive single output LDO regulator with a nominal output voltage of 2.5V and max dropout voltage of 0.5V, suitable for applications requiring stable low-voltage power supplies in compact spaces. Operating temperature ranges from -40 °C to 125°C, making it ideal for various electronic devices where space and efficiency are crucial factors. This surface-mount device features a small outline package style with no lead terminals, offering precise regulation with minimal footprint.
Median Price
$4.830
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$3.390
1k+ parts
$2.710
10k+ parts
$2.640
DigiKey
$3.070
$2.752
$2.649
Analog Devices Inc
$5.710
$2.659
$2.138
-
Verical
$2.115
Vyrian
$2.300
Digiode
$5.254
Anansix
J2 Sourcing AB
One Stop Electronics
$1.700
Corohmni
MARBEL Systems
$2.392
Texas Native Microelectronics
$2.749
$2.639
$2.557
$2.419
Kenton Components
$3.299
$2.903
Ampacity Inc.
$3.700
Semicontronic
$3.608
$3.589
Parana Technologies
$4.536
$4.218
IDEA Electronic Components Group
$4.877
$4.633
Corphita
$4.977
Qasali Group International
$7.422
$6.903
$6.532
DigiPath Technology Company
$7.608
$7.304
QUARKTWIN TECHNOLOGY LTD
GreenTree Electronics
Durable and lightweight material, ideal for electronic components to ensure long-term reliability.
Low dropout voltage ensures efficient power conversion, reducing energy waste and heat generation.
Ease of installation and space-saving design for compact electronic devices.
Wide operating temperature range allows for reliable performance in various environmental conditions.
Sleek and compact design for easy integration into small electronic systems.
Lead-free terminals for environmentally friendly manufacturing and usage.
Can operate in extremely low temperatures, making it suitable for a wide range of applications.
Tape and reel packaging for convenient handling and automated assembly processes.
Stable output voltage ensures consistent performance of connected devices.
High voltage tolerance for reliable regulation of output voltage, enhancing overall system stability.
Standard output voltage suitable for various electronic applications.
Sufficient number of terminals for easy connectivity and integration within a circuit.
Compact and efficient package style for optimized thermal dissipation and space-saving.
Fine terminal pitch for high-density mounting and soldering on PCBs.
Stable and accurate voltage regulation for consistent performance of connected devices.
Durable and corrosion-resistant terminal finish for long-term reliability.
Dual terminal position for versatile installation options and compatibility.
Higher maximum output voltage for powering a wider range of electronic components.
Low profile design for slim and compact electronic device applications.
Narrow width for space-efficient placement on PCBs and in tight spaces.
Low minimum input voltage requirement for compatibility with various power sources.
Suitable output current rating for low-power devices and applications.
High peak reflow temperature for reliable soldering and manufacturing processes.
Compact length for space-saving placement within electronic systems.
High maximum input voltage for versatility and compatibility with various power sources.
Fixed Regulators - Positive Single Output LDO LT3008IDC-2.5#TRMPBF attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Analog Devices
Maximum Dropout Voltage-1:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
LT3008IDC-2.5#TRMPBF Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
LM358AN
Philips Semiconductors
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
Silicon Transistor
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
LT1129IQ-5#PBF
Analog Devices
LT1129IQ-5#PBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.7V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
LM2936HVBMA-3.3/NOPB
LM2936HVBMA-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.05A max output current. It has a small outline package style, operates b/w -40 to 150 °C, and offers low dropout voltage of 0.2V for applications requiring stable voltage regulation in compact designs.
LP2950CDTX-5.0/NOPB
LP2950CDTX-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.1A max output current, and 30V max input voltage. Ideal for applications requiring stable voltage supply in compact spaces due to its small outline package style and low dropout voltage of 0.6V at max load regulation of 0.015%.
LT1763CS8-1.8#PBF
LT1763CS8-1.8#PBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 1.8V and max output current of 0.5A. It has a small outline package style, operates in temperatures ranging from -40 to 125°C, and is suitable for applications requiring low dropout voltage and precise voltage regulation.
MIC5235-5.0YM5-TR
Microchip Technology
MIC5235-5.0YM5-TR by Microchip: Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.15A Max Output Current, and 2% Max Voltage Tolerance. Ideal for applications requiring low dropout voltage and precise voltage regulation in compact electronic devices.
MIC5235-3.3YM5-TR
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Terminal Position: DUAL; Maximum Output Current-1: .15 A;
ADP7118ACPZN5.0-R7
Analog Devices' ADP7118ACPZN5.0-R7 is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.2A. It operates in an input voltage range from 6V to 20V, making it suitable for various applications requiring stable voltage regulation in compact spaces due to its small outline package style.
LM2937ES-3.3/NOPB
LM2937ES-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 3.3V and max current of 0.5A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. Its small outline package and surface mount capability enhance its versatility in electronic devices.
LM2937ESX-5.0/NOPB
LM2937ESX-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount designs where space is limited.
LM2936HVMA-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
MIC5504-3.3YM5-TR
MIC5504-3.3YM5-TR by Microchip is a CMOS LDO regulator with 3.3V output voltage, 0.3A max output current, and 3% voltage tolerance. Ideal for applications requiring fixed positive single output regulators in automotive electronics, industrial controls, and consumer devices.
LM3940IS-3.3
LM3940IS-3.3 by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 3.3V and max current of 1A. It has a small outline package style, operates b/w -40°C to 125°C, and offers low dropout voltage at 1V for efficient power management in various electronic applications.
LT1129IST-5#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 3 %;
LT1963AEST-3.3#TRPBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
LF33CDT-TRY
LF33CDT-TRY by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It has a small outline package style, operates in temperatures ranging from -40 to 125°C, and is suitable for applications requiring stable voltage regulation in automotive electronics.
LM1117MP-3.3
LM1117MP-3.3 by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.8A max output current. It has a small outline package style, operates b/w 0-125°C, and offers low dropout voltage of 1.2V for applications requiring stable voltage regulation in compact designs.
LT1761ES5-3.3#TRMPBF
Analog Devices' LT1761ES5-3.3#TRMPBF is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It features a small outline, thin profile package style suitable for surface mount applications in various electronic devices, ensuring stable performance with low dropout voltage and high line regulation accuracy.
LM1117DTX-2.5/NOPB
LM1117DTX-2.5/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 2.5V and max output current of 0.8A, suitable for applications requiring stable voltage regulation in the range of 3.9V to 10V input voltage. It features low dropout voltage of 1.2V, making it ideal for compact designs where space is limited, with excellent load and line regulation capabilities for reliable performance in various electronic devices.
LP38692MP-3.3/NOPB
Texas Instruments LP38692MP-3.3/NOPB is a 1A fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max dropout voltage of 1V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
LT3010EMS8E-5#PBF
Analog Devices' LT3010EMS8E-5#PBF is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.55V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 80 V; Maximum Voltage Tolerance: 3 %;
LT3010EMS8E-5#TRPBF
Analog Devices' LT3010EMS8E-5#TRPBF is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.55V. This surface-mount device operates b/w -40°C to +125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LT3032EDE#TRPBF
Analog Devices' LT3032EDE#TRPBF is a fixed positive single output LDO regulator with a max output current of 0.15A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in need of stable voltage regulation in compact spaces. The package style is small outline with very thin profile, ideal for surface mount designs requiring efficient heat dissipation.
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 14; Package Code: HVSON; Terminal Form: NO LEAD; Moisture Sensitivity Level (MSL): 1; Length: 4 mm;
LT3032EDE#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 14; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Pitch: .5 mm; Moisture Sensitivity Level (MSL): 1;
LT3032EDE#PBF by Analog Devices is a fixed positive single output LDO regulator with a max output current of 0.15A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. This surface-mount device features a small outline package style with 14 terminals and matte tin finish, ideal for space-constrained designs that demand efficient power management.
LT3010EMS8E-5#TR
Analog Devices' LT3010EMS8E-5#TR is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.55V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style includes a small outline, heat sink/slug, thin profile, and shrink pitch design for efficient surface mounting.
LT3010EMS8E-5
Analog Devices' LT3010EMS8E-5 is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.55V. This surface-mount device in a small outline package is ideal for applications requiring stable voltage regulation in tight spaces, such as portable electronics or IoT devices.
LT3060ETS8-5#TRMPBF
Analog Devices' LT3060ETS8-5#TRMPBF is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.51V. Operating temperature ranges from -40 to 125°C, making it suitable for applications requiring stable voltage regulation in compact spaces like consumer electronics and industrial control systems.
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 50 V; Maximum Voltage Tolerance: 2 %;
LT3081MPFE#PBF
Fixed Positive Single Output LDO Regulators; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Maximum Input-Output Voltage Differential: 1.5 V; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
LT3021ES8-1.2#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 10 V; Maximum Voltage Tolerance: 3.58 %;
LT3021ES8-1.2#PBF by Analog Devices is a Fixed Positive Single Output LDO Regulator with 1.2V Nominal Output Voltage, 0.5A Max Output Current, and 10V Max Input Voltage. It is ideal for applications requiring stable voltage regulation in compact spaces due to its small outline package style and surface mount capability.
LT3008ETS8-3.3#TRMPBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Maximum Dropout Voltage-1: .5 V;
LT3060EDC-5#TRMPBF
Analog Devices' LT3060EDC-5#TRMPBF is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.51V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With surface mount capability and small outline package style, it is ideal for designs where space-saving and efficient power management are crucial.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved