Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LT1615IS5-1#TRMPBF by Analog Devices is a 5-terminal switching regulator with voltage-mode control. It operates b/w 0°C to 70°C, suitable for commercial applications. With a boost switcher configuration and max output current of 0.125A, it's ideal for low-power systems requiring constant off-time control technique.
Median Price
$7.770
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$5.080
1k+ parts
$4.530
10k+ parts
-
Analog Devices Inc
$5.077
$4.592
$4.534
DigiKey
$4.942
Newark
$8.310
$5.430
$4.970
Element14
$10.390
$6.280
$5.400
Arrow
$4.345
Verical
$3.274
Farnell
$5.320
$4.640
Chip1Stop
$4.520
Nova Conductors
$3.655
Mobius Materials
$3.710
Digiode
$6.472
Vyrian
Chip Stock
Anansix
Netsource Technology, Inc.
Prism Electronics
Semtec, LLC
Aztec Data Supply Inc.
$1.690
Ampacity Inc.
$2.780
Semicontronic
$2.710
$2.697
Argo Parts USA
Netroflash
Corohmni
$3.758
Advanced Electronics
$3.871
$3.677
Vigor
$5.280
MARBEL Systems
$5.640
Continental Prestige Electronics
$5.750
$4.230
$3.050
Corphita
$6.132
Texas Native Microelectronics
$6.483
$6.224
$6.029
$5.705
Kenton Components
$7.780
$6.846
Parana Technologies
$13.948
$12.972
IDEA Electronic Components Group
$14.998
$14.248
Qasali Group International
$17.504
$16.279
$15.404
DigiPath Technology Company
$23.397
$22.461
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Authorized Procurement Solutions
Futuretech Components
Provides durability and protection for the internal components of the switching regulator, ensuring long-term reliability.
Enables easy and quick installation on circuit boards, saving time in the assembly process.
Allows for precise control over output voltage, ensuring stable and accurate power delivery.
Capable of delivering a decent amount of current, suitable for various applications that require power conversion.
Boost configuration is efficient for increasing output voltage levels, making it suitable for applications that require step-up voltage conversion.
Switching Regulators & Controllers LT1615IS5-1#TRMPBF attributes and parameters. Explore more Switching Regulators & Controllers devices from Analog Devices
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Switcher Config:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LT1615IS5-1#TRMPBF Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Daco Semiconductor
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
Wuxi Xuyang Electronic
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Gulf Semiconductor
ERJ2RKF1002X
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Synsemi
Micro Commercial Components
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
Semitron
LM5085MYE/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
TPS62130RGTR
Texas Instruments
TPS62130RGTR by Texas Instruments is a 16-terminal switching regulator with a voltage-mode control technique. It operates b/w -40 to 85°C, supporting input voltages from 3-17V and output voltages up to 6V at a max current of 3A. Ideal for industrial applications requiring efficient power conversion in compact spaces.
LM25116MHX/NOPB
LM25116MHX/NOPB by Texas Instruments is a current-mode switching controller with a max output current of 20A and a max switching frequency of 1MHz. It operates in automotive-grade temperatures (-40 to 125°C) and is suitable for applications requiring high efficiency power conversion, such as automotive electronics and industrial automation systems.
TPS61041DBVR
TPS61041DBVR by Texas Instruments is a switching regulator with 5 terminals, operating b/w -40 to 85°C. It offers a max output voltage of 28V and current of 0.285A, suitable for industrial applications requiring boost switcher configuration at up to 1000kHz frequency.
LM3150MHX/NOPB
LM3150MHX/NOPB by Texas Instruments is a switching regulator with 14 terminals, operating at -40 to 125°C. It offers a max output voltage of 40V and current up to 12A, suitable for automotive applications. With hysteric current mode control technique and push-pull configuration, it supports input voltages from 6-42V and has a compact design with small outline package style.
LM2594M-5.0/NOPB
LM2594M-5.0/NOPB by Texas Instruments is a switching regulator with 8 terminals, VOLTAGE-MODE control mode, and 3.3V min output voltage. Ideal for automotive applications due to its small size (1.75mm height) and wide operating temperature range (-40 to 125 °C).
LMZ14201HTZE/NOPB
LMZ14201HTZE/NOPB by Texas Instruments is a switching regulator with 1A output current, 5-24V output voltage range, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design. Suitable for various power management needs in automotive systems.
TPS54302DDCR
TPS54302DDCR by Texas Instruments is a switching regulator with 3A output current, 400kHz max frequency, and -40 to 125°C operating temp. Ideal for automotive applications due to its compact size, PWM control mode, and buck switcher configuration.
LM5575MH/NOPB
LM5575MH/NOPB by Texas Instruments is a 16-terminal switching regulator with a max output current of 2.5A and max output voltage of 70V. Ideal for automotive applications, it operates b/w -40 to 125°C, with a control mode of current-mode PWM.
TPS63020DSJT
TPS63020DSJT by Texas Instruments is a switching regulator with 14 terminals, operating temperature range of -40 to 85°C, and output current up to 4.5A. Ideal for industrial applications requiring a compact design, it supports input voltages from 1.8V to 5.5V and offers pulse width modulation control for efficient power management at frequencies up to 2600kHz.
LM2672M-3.3/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC3646IDE#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
LM3485MMX/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
TL494IN
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS62410DRCRG4
TPS62410DRCRG4 by Texas Instruments is a dual switching controller with a max output current of 0.8A and a max switching frequency of 2500kHz. It operates in voltage-mode control technique, suitable for industrial applications requiring precise power regulation in compact spaces.
LM2675MX-ADJ
LM2675MX-ADJ by Texas Instruments is a voltage-mode switching regulator with a max output current of 2.2A and a max switching frequency of 275kHz. Ideal for automotive applications, it operates b/w -40 to 125°C, with a nominal input voltage of 12V and nominal output voltage of 1.21V.
TPS62172DSGR
TPS62172DSGR by Texas Instruments is a switching regulator with a 12V nominal input voltage and 3.3V output voltage, ideal for industrial applications. It operates in hysteric current mode with a max output current of 0.5A and a max switching frequency of 2250 kHz, ensuring efficient power conversion in compact designs.
LM2575TV-5G
LM2575TV-5G by Onsemi is a BIPOLAR SWITCHING REGULATOR with 3.2A output current, 63 kHz switching frequency, and VOLTAGE-MODE control. Ideal for automotive applications due to its AUTOMOTIVE temperature grade, it operates b/w -40°C to 125°C efficiently regulating voltage from 4.75V to 40V down to a stable 3.3V output.
L5970D
L5970D by STMicroelectronics is a MOS switching regulator with 2.25A output current and 280kHz switching frequency. Ideal for automotive applications, it operates b/w -40 to 125°C, supports input voltages from 4.4V to 36V, and uses pulse frequency modulation control technique.
LM5164DDAT
LM5164DDAT by Texas Instruments is a switching regulator with 1A output current, 90V max output voltage, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and compact design suitable for small outline packages.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ-R5
Analog Devices
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
LT1616ES6#TRPBF
LT1616ES6#TRPBF by Analog Devices is a small outline switching regulator with 6 terminals, operating at 0-70°C. It features a buck switcher configuration, pulse width modulation control technique, and can handle up to 0.85A output current. Ideal for applications requiring efficient power conversion in compact spaces.
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LT1616ES6#TRMPBF
LT1616ES6#TRMPBF by Analog Devices is a small outline switching regulator with 6 terminals. It operates b/w 0-70°C, supporting input voltages from 3.6V to 25V and output currents up to 0.85A. Ideal for applications requiring pulse width modulation control at a max frequency of 1800 kHz.
LT1615ES5-1#TRMPBF
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LT1615ES5-1#TRMPBF by Analog Devices is a voltage-mode switching regulator with a max output current of 0.125 A, suitable for boost configurations. Operating temperature ranges from 0 to 70°C, making it ideal for commercial applications requiring precise control techniques in compact designs. The small outline package with dual terminals and matte tin finish ensures reliable performance in various electronic devices.
LT1676IS8#PBF
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LT1676IS8#PBF by Analog Devices is a current-mode switching regulator with 1A output current, 115kHz max switching frequency, and 48V nominal input voltage. Ideal for buck applications, it features pulse width modulation control technique in a small outline package suitable for surface mount designs.
LT1616ES6#PBF
LT1616ES6#PBF by Analog Devices is a small outline switching regulator with 6 terminals. It operates b/w 0-70°C, supporting input voltages from 3.6V to 25V and output currents up to 0.85A. Ideal for applications requiring pulse width modulation control at a max frequency of 1800 kHz.
LT1611CS5#TRMPBF
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LT1611CS5#TRMPBF by Analog Devices is a 5-terminal switching regulator with current-mode control, operating b/w 0-70°C. It features a max output current of 0.8A, PWM control technique, and buck-boost switcher configuration. Ideal for applications requiring a small outline package with low profile and shrink pitch design.
LT1615ES5#TRMPBF
LT1615ES5#TRMPBF by Analog Devices is a 5-terminal switching regulator with a max output current of 0.4A and boost switcher config. Operating temp range from 0 to 70°C makes it suitable for commercial applications requiring voltage-mode control technique in compact designs. Package style is small outline, very thin profile, shrink pitch, ideal for surface mount assembly.
LT1676CS8#PBF
LT1676CS8#PBF by Analog Devices is a current-mode switching regulator with 1A output current and 115kHz max switching frequency. Ideal for buck applications, it operates b/w 7.4V to 60V input voltage range in a small outline package suitable for surface mount designs.
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LT1676IS8#TRPBF
LT1676IS8#TRPBF by Analog Devices is a current-mode switching regulator with 1A output current, 115kHz max switching frequency, and 48V nominal input voltage. Ideal for buck applications, it features a small outline package style, matte tin terminal finish, and dual terminal position.
LT1617ES5#TRMPBF
SWITCHED CAPACITOR REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LT1617ES5#TRMPBF by Analog Devices is a small outline, low profile switched capacitor regulator with 5 terminals. It operates b/w 0-70°C and supports input voltages from 1.2V to 15V, delivering a max output current of 0.4A. Ideal for applications requiring compact size and efficient power regulation in commercial-grade environments.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved