Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' LT1020ISW#TRPBF is an adjustable positive single output standard regulator with a max input-output voltage differential of 33.5V and a max load regulation of 0.4%. It operates in temperatures ranging from -40 to 100 °C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
MARBEL Systems
$3.134
Texas Native Microelectronics
$3.602
$3.458
$3.350
$3.170
Kenton Components
$4.322
$3.804
Parana Technologies
$4.591
$4.270
IDEA Electronic Components Group
$4.937
$4.690
DigiPath Technology Company
$7.702
$7.394
Vigor
$7.780
Qasali Group International
$9.725
$9.045
$8.558
Semicontronic
$14.500
$14.138
$14.065
AZTECH Wire
$15.381
One Stop Electronics
$16.500
Microchip USA
$32.634
Corphita
Corohmni
This material provides durability and protection for the internal components of the regulator, ensuring long-term reliability.
Allows for easy and efficient mounting on circuit boards, saving space and simplifying assembly.
Provides a wide range of voltage differential for versatile applications.
Bipolar technology offers stable and reliable performance for precision voltage regulation.
Rectangular shape allows for efficient use of board space and easy placement in circuit designs.
Gull wing terminals make soldering and connection easier during assembly.
TR packing method ensures secure packaging for transportation and storage.
Provides precise and adjustable output voltage for various requirements.
Allows for multiple connection options and flexibility in circuit layout.
Offers excellent line regulation, maintaining stable output voltage despite input voltage variations.
Small outline package style saves space and allows for dense circuit board designs.
Adjustable output voltage provides customization and versatility for different applications.
Precise load regulation ensures stable output voltage under varying load conditions.
Wide operating temperature range makes this regulator suitable for various environmental conditions.
Optimal terminal pitch allows for easy soldering and connection in tight spaces.
Low minimum voltage differential allows for efficient voltage regulation in low-power applications.
Wide temperature range ensures reliable operation even in extreme cold conditions.
Standard regulator provides stable and reliable positive output voltage for various electronic devices.
Matte tin finish ensures good electrical conductivity and solderability for reliable connections.
Dual terminal position allows for flexible installation and connection options.
High maximum output voltage range suitable for a wide range of electronic applications.
Low seated height saves space and allows for compact circuit board designs.
Narrow width allows for efficient use of board space and easy placement in designs where space is limited.
Capable of handling moderate output current for powering various electronic components.
Can withstand peak reflow temperatures for a sufficient duration during assembly.
High peak reflow temperature tolerance ensures reliable soldering during assembly.
Low dropout voltage ensures efficient voltage regulation with minimal power loss.
Compact length allows for space-saving placement on circuit boards.
Adjustable Regulators - Positive Single Output Standard LT1020ISW#TRPBF attributes and parameters. Explore more Adjustable Regulators - Positive Single Output Standard devices from Analog Devices
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LT1020ISW#TRPBF Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Hitachi
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
Loras Industries
LT3081MPT7#PBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 7; Package Code: ZIP; Terminal Form: THROUGH-HOLE; Nominal Dropout Voltage-1: 1.23 V; Terminal Pitch: 1.27 mm;
LT3055HMSE#TRPBF
Analog Devices
LT3055HMSE#TRPBF by Analog Devices is an adjustable positive single output standard regulator with a max output voltage of 40V and max output current of 0.5A. It operates in temperatures ranging from -40 °C to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style includes a small outline, heat sink/slug, thin profile, and shrink pitch design for efficient thermal management and space-saving integration.
HIP5600IS2
Intersil
HIP5600IS2 by Intersil is an adjustable positive single output standard regulator with a max output voltage of 350V and max output current of 0.01A. It operates in temperatures ranging from -40°C to 100°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The surface-mount package style and Gull Wing terminal form enhance its versatility for compact designs.
5962R0722901V9A
Texas Instruments
Texas Instruments' 5962R0722901V9A is an adjustable positive single output standard regulator with a max output voltage of 57V and input voltage up to 60V. Operating in temperatures ranging from -55°C to 125°C, it offers load regulation of 0.04% and line regulation of 0.05%/V, making it ideal for applications requiring precise voltage control in harsh environments such as aerospace or military systems.
LM117HRLQMLV
LM117HRLQMLV by Texas Instruments is an adjustable positive single output standard regulator with a max output current of 1.5A and a total dose of 100k Rad(Si). Operating temperature ranges from -55 to 150 °C, making it suitable for applications in harsh environments requiring precise voltage regulation. Its MIL-PRF-38535 Class V screening level ensures reliability in critical systems.
LA59700MC
LA59700MC by Onsemi is an adjustable positive single output standard regulator with a min output voltage of 1.5V and max output voltage of 13.5V. This surface-mount device has a small outline package style, gull wing terminals, and is ideal for applications requiring precise voltage regulation in compact spaces.
LM317SX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Adjustability: ADJUSTABLE; No. of Functions: 1;
RH117MH#PBF
Analog Devices' RH117MH#PBF is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V and operating temperature range from -55 to 150 °C. With a max output current of 0.5A, it is ideal for applications requiring precise voltage regulation in harsh environments.
NCP786LSTADJT3G
NCP786LSTADJT3G by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 15V and load regulation of 1%. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
HSYE-117RH-Q
Renesas Electronics
HSYE-117RH-Q by Renesas Electronics is an adjustable positive single output standard regulator with a max output voltage of 37V and total dose of 300k Rad(Si). This chip carrier package has a ceramic, metal-sealed cofired body material and operates in temperatures ranging from -55°C to 175°C. Ideal for applications requiring high reliability in harsh environments such as aerospace or defense systems.
TL317CLP
TL317CLP by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 35V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation. With a compact cylindrical package style and matte tin terminal finish, it offers flexibility and reliability in electronic designs.
LM150K883
LM150K883 by Linear Technology is an adjustable positive single output standard regulator with a max output current of 3A and a max output voltage of 32V. Operating temperature ranges from -55°C to 150°C, making it suitable for harsh environments. With MIL-STD-883 screening level, it is ideal for applications requiring high reliability in aerospace or military sectors.
LM723J/883/NOPB
LM723J/883/NOPB by Texas Instruments is a MIL-STD-883 compliant adjustable positive single output standard regulator with max output voltage of 37V and max current of 0.15A. This bipolar technology device in ceramic package is ideal for applications requiring precise voltage regulation in harsh environments.
LM150GMD8
LM150GMD8 by Texas Instruments is an adjustable positive single output standard regulator with a max output current of 3A. It features a max input-output voltage differential of 35V and operates in temperatures ranging from -55 to 125°C. Ideal for applications requiring precise voltage regulation in compact designs.
NCV317BD2TR4G
NCV317BD2TR4G by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5 A and a max input-output voltage differential of 40 V. It is commonly used in applications requiring precise voltage regulation, such as power supplies and battery charging circuits.
JM38510/11703BXA
JM38510/11703BXA by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max load regulation of 1%. Operating temperature ranges from -55 to 125°C, making it suitable for various applications in harsh environments requiring precise voltage regulation.
HV3-2405E-5
HV3-2405E-5 by Intersil is an adjustable positive single output standard regulator with a max output voltage of 24V. Operating at up to 150°C, it features bipolar technology and comes in a rectangular package style. Ideal for applications requiring precise voltage regulation in various electronic devices.
LM723CMDA
LM723CMDA by Texas Instruments is a BIPOLAR adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 0.15A. This surface mount device has a min output voltage of 2V, making it suitable for various applications requiring precise voltage regulation in compact designs.
KA317LZTA
KA317LZTA by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 0.1A. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is cylindrical, with through-hole terminals and a terminal pitch of 1.27mm, providing ease of use in assembly processes.
LM317LIPKG3
LM317LIPKG3 by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 35V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications. With a small outline package style and flat terminal form, it offers precise regulation with low load and line variation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
LT1020CN
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 14; Package Code: DIP; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Qualification Status: Not Qualified;
LT1020CN#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 14; Package Code: DIP; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 2 V; Qualification Status: Not Qualified;
LT1020CSW
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: SOP; Terminal Form: GULL WING; JESD-609 Code: e0; Maximum Output Current-1: .125 A;
LT1020CSW#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: SOP; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G16; Qualification Status: Not Qualified;
LT1020CSW#TR
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: SOP; Terminal Form: GULL WING; No. of Functions: 1; Minimum Operating Temperature: 0 Cel;
LT1020CSW#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: SOP; Terminal Form: GULL WING; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Output Current-1: .125 A;
LT1020IN
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 14; Package Code: DIP; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Width: 7.62 mm;
LT1020IN#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 14; Package Code: DIP; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; Maximum Time At Peak Reflow Temperature (s): 30;
LT1020ISW
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: SOP; Terminal Form: GULL WING; Terminal Finish: TIN LEAD; Surface Mount: YES;
LT1020ISW#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: SOP; Terminal Form: GULL WING; No. of Functions: 1; Terminal Finish: MATTE TIN;
LT1020ISW#TR
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: SOP; Terminal Form: GULL WING; Maximum Output Current-1: .125 A; Technology: BIPOLAR;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: SOP; Terminal Form: GULL WING; Minimum Output Voltage-1: 2.46 V; Length: 10.2995 mm;
LT1020ISW#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: SOP; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G16; Terminal Pitch: 1.27 mm;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: SOP; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE; Maximum Line Regulation (%/V): .02;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: SOP; Terminal Form: GULL WING; Maximum Output Voltage-1: 35.35 V; Width: 7.493 mm;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: SOP; Terminal Form: GULL WING; Maximum Output Voltage-1: 35.35 V; Maximum Input-Output Voltage Differential: 33.5 V;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 14; Package Code: DIP; Terminal Form: THROUGH-HOLE; Peak Reflow Temperature (C): 260; Package Equivalence Code: DIP14,.3;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: SOP; Terminal Form: GULL WING; Peak Reflow Temperature (C): 260; Width: 7.493 mm;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 14; Package Code: DIP; Terminal Form: THROUGH-HOLE; Terminal Pitch: 2.54 mm; Maximum Time At Peak Reflow Temperature (s): 30;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: SOP; Terminal Form: GULL WING; Maximum Operating Temperature: 100 Cel; Adjustability: ADJUSTABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved