Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HTS-0025 is a Sample & Hold IC with 24 terminals, METAL package, and RECTANGULAR shape. It operates at -40 to 70°C, with max droop rate of 800 V/s. Ideal for SAMPLE AND HOLD CIRCUIT applications due to its fast acquisition time of 30 us and wide input voltage range of ±4V.
Median Price
$357.930
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$336.460
1k+ parts
$304.240
10k+ parts
-
Freelance Electronics
$327.926
Digiode
$340.034
DigiKey Marketplace
$354.530
Vyrian
Electronic Expediters
Parana Technologies
$6.716
$6.245
IDEA Electronic Components Group
$7.221
$6.860
DigiPath Technology Company
$11.265
$10.814
AZTECH Wire
$17.070
Semicontronic
$296.634
$295.113
Corphita
$322.137
Microchip USA
$490.845
Glotronic Ltd.
The use of metal for the package body provides enhanced durability and protection for the internal components of the IC.
The high maximum droop rate allows for quick and efficient voltage sampling and holding, ensuring accurate and reliable performance.
The nominal supply voltage of 15V provides adequate power for the operation of the sample and hold circuit.
With a maximum operating temperature of 70°C, this IC can function effectively in a wide range of environmental conditions.
The fast maximum acquisition time of 40 microseconds ensures rapid sampling of input signals for accurate output.
The bipolar technology used in this IC offers high precision and low noise performance, making it suitable for demanding applications.
The use of a sample and hold circuit amplifier type allows for the accurate capture and retention of input signal levels, ensuring reliable operation.
Sample & Hold ICs HTS-0025 attributes and parameters. Explore more Sample & Hold ICs devices from Analog Devices
Amplifier Type:
Technology:
Power Supply Voltage Ratings:
Total Functions:
Sub-Category:
Sampling Mode:
Nominal Acquisition Time:
Maximum Acquisition Time:
Nominal Supply Voltage:
Maximum Negative Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Minimum Analog Input Voltage:
Maximum Analog Input Voltage:
Maximum Droop Rate:
Length:
Width:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Package Code:
Package Shape:
Package Style (Meter):
Package Equivalence Code:
HTS-0025 Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
SS14
Frontier Electronics
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
1N4148WS
Continental Device India
General Semiconductor
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N5819HW-7-F
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
5962-8954101CA
Analog Devices
Analog Devices' 5962-8954101CA is a MIL-STD-883 compliant Sample & Hold IC with a max droop rate of 4 V/s, operating at temperatures from -55 to 125 °C. It features a nominal voltage of 15V and can handle analog input voltages ranging from 5V to 10V. Ideal for military applications requiring precise sample-and-hold circuitry in harsh environments.
SMP11EY
Analog Devices' SMP11EY is a Sample & Hold IC with 14 terminals, ceramic package, and rectangular shape. It operates at -18V to +18V with a droop rate of 0.36 V/s. Ideal for commercial applications requiring fast acquisition time and bipolar technology.
SMP11BY/883
Analog Devices' SMP11BY/883 is a MIL-STD-883 compliant Sample & Hold IC with 14 terminals. It operates at temperatures from -55 to 125 °C and has a droop rate of 5 V/s. Ideal for military applications, it features a ceramic, glass-sealed package and bipolar technology.
SMP10G
Analog Devices' SMP10G is a Sample & Hold IC with 7 terminals, operating at ±15V supply voltage. It features a max droop rate of 0.5 V/s and offers a fast acquisition time of 3.5 us. Ideal for applications requiring precise analog signal sampling in electronic circuits.
5962-01-371-2961
Analog Devices' 5962-01-371-2961 is a MILITARY-grade Sample & Hold IC with 24 terminals, operating from -55 to 125 °C. It features +-15V power supplies, HYBRID technology, and THROUGH-HOLE terminals. Ideal for precision signal processing in harsh environments.
MAX5165NCCM
Maxim Integrated
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
MAX5166MCCM
MAX5166MCCM by Maxim Integrated is a Sample & Hold IC with BICMOS technology. It features 48 terminals, 10V nominal voltage, and 0.04 V/s max droop rate. Ideal for applications requiring fast acquisition times and precise analog signal sampling in commercial temperature environments.
SMP11AY/883
Analog Devices' SMP11AY/883 is a MIL-STD-883 compliant Sample & Hold IC with 14 terminals. It operates at temperatures from -55 to 125 °C and has a max droop rate of 4 V/s. Ideal for military applications, it features a nominal voltage of +-15V and offers fast acquisition time of 5 us.
5962-8954104CX
Analog Devices' 5962-8954104CX is a MILITARY-grade Sample & Hold IC with +-15V power supplies, 14 terminals, and 125 °C max operating temp. Ideal for applications requiring a high-performance SAMPLE AND HOLD CIRCUIT in harsh environments.
5962-8954102CA
Analog Devices' 5962-8954102CA is a MILITARY-grade Sample & Hold IC with 14 terminals, operating from -55 to 125 °C. It features a Max Droop Rate of 2 V/s, Nominal Voltage of +-15V, and Max Analog Input Voltage of 10V. Ideal for applications requiring precise signal sampling and holding in harsh environments.
SHC605AU
Texas Instruments
SHC605AU by Texas Instruments is a Sample & Hold IC with 16 terminals, operating at -40 to 85 °C. It features a max droop rate of 8000 V/s, acquisition time of 0.04 us, and operates on +-5V supplies. Ideal for industrial applications requiring fast signal sampling and holding capabilities in a compact small outline package.
AD583KQ
AD583KQ by Analog Devices is a Sample & Hold IC with 14 terminals, operating at -15V to +15V. It features a max supply current of 5mA and operates in temperatures ranging from 0°C to 70°C. Ideal for applications requiring bipolar technology and a commercial temperature grade.
SMP18FRU-REEL7
Analog Devices' SMP18FRU-REEL7 is a Sample & Hold IC with 8 functions, operating at -40 to 85 °C. It has a max droop rate of 0.04 V/s and supports a nominal voltage of 5V. Ideal for industrial applications requiring precise sample and hold circuitry in compact form factors.
4860
Telcom Semiconductor
Telcom Semiconductor's 4860 is a Sample & Hold IC with 24 terminals, operating at temperatures from 0 to 70°C. It features ±15V power supplies, ceramic package material, and through-hole terminal form. Ideal for applications requiring a hybrid technology sample and hold circuit with commercial temperature grade specifications.
MAX5168LECM-T
SAMPLE AND HOLD CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
5962-9073001HYX
SAMPLE AND HOLD CIRCUIT; JESD-609 Code: e0; Qualification: Not Qualified; Terminal Finish: Tin/Lead (Sn/Pb);
AD585-703M
AD585-703M by Analog Devices is a Sample & Hold IC with 14 terminals, operating at -55 to 125 °C. It has a max acquisition time of 3 us and droop rate of 1000 V/s. Ideal for military applications due to its MIL temperature grade and flatpack package style.
DS1843D
DS1843D by Analog Devices is a Sample & Hold IC with 8 terminals, operating at -40 to 85 °C. It has a power supply of 3/5V, max supply current of 9mA, and terminal pitch of 0.5mm. Ideal for industrial applications requiring a small outline package with surface mount capability.
HMC1061LC5TR-R5
Analog Devices' HMC1061LC5TR-R5 is a Sample & Hold IC in a ceramic square package, with 32 terminals and max droop rate of 400000 V/s. It operates at -40 to 85 °C, has a supply voltage of 2V, and track-and-hold functionality. Ideal for industrial applications requiring fast acquisition times and precise analog signal processing.
5962-01-253-1903
Analog Devices' 5962-01-253-1903 is a Sample & Hold IC with +-5,+-15,-5.2 V power supplies. It features 24 terminals in an IN-LINE package style and operates b/w 0 to 70°C. Ideal for commercial applications requiring bipolar technology and a sample and hold circuit amplifier.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
HTS-0010KD
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: PIN/PEG; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
HTS-0010SD
SAMPLE AND HOLD CIRCUIT; Temperature Grade: MILITARY; Terminal Form: PIN/PEG; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
HTS-0010SD/883
HTS-0010SDB
SAMPLE AND HOLD CIRCUIT; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
HTS-0025M
SAMPLE AND HOLD CIRCUIT; Temperature Grade: OTHER; Terminal Form: PIN/PEG; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
HTS-0025MB
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved