Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC933LP4ETR is a 24-terminal RF phase shifter with plastic/epoxy package. Operating temp range: -40 to 85 °C. Ideal for surface mount applications in RF/microwave systems requiring precise phase control.
Median Price
$42.730
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
-
1k+ parts
$30.170
10k+ parts
$29.300
Digiode
$40.594
Vyrian
Parana Technologies
$1.865
$1.734
IDEA Electronic Components Group
$2.005
$1.905
DigiPath Technology Company
$3.128
$3.003
Semicontronic
$36.320
$35.412
$35.230
Ampacity Inc.
Corphita
$38.457
This material provides durability and resistance to environmental factors, making the phase shifter suitable for various applications.
Having 24 terminals allows for more precise control and adjustment in phase shifting, providing flexibility in RF/microwave signal processing.
With a high maximum operating temperature, this phase shifter can withstand demanding conditions and maintain performance reliability.
The low minimum operating temperature ensures the phase shifter can operate effectively in a wide range of environments, including extreme cold temperatures.
Being specifically designed as a phase shifter ensures optimal performance and accuracy in adjusting the phase of RF/microwave signals.
The surface mount capability simplifies installation and integration, saving time and effort in setting up the phase shifter in electronic systems.
RF/Microwave Phase Shifters HMC933LP4ETR attributes and parameters. Explore more RF/Microwave Phase Shifters devices from Analog Devices
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
RF or Microwave Device Type:
Sub-Category:
HMC933LP4ETR RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
International Semiconductor
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Silicon Standard
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
Dc Components
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
HMC936ALP6ETR
Analog Devices
Analog Devices' HMC936ALP6ETR is a RF/Microwave Phase Shifter with 360° max phase shift, 7 dB insertion loss, and 33 dBm CW input power. It operates b/w -40 °C to 85°C, has a frequency range of 1200-1400 MHz, and is ideal for digitally controlled applications in communications systems.
HMC936LP6E
HMC936LP6E by Analog Devices is a COAXIAL MECHANICAL PHASE SHIFTER with 50 ohm impedance. It offers a max phase shift of 360° and insertion loss of 7 dB. Ideal for RF/Microwave applications, it operates b/w 1200-1400 MHz with a power handling capacity of up to 33 dBm.
HMC648
Analog Devices' HMC648 is a RF/Microwave Phase Shifter with 50 ohm impedance, offering 0-360° phase shift range. It supports frequencies from 2900 MHz to 3900 MHz and can handle up to 33 dBm CW power. Ideal for applications requiring precise phase control in high-frequency systems.
TGP6336-EEU
TGP6336-EEU by Texas Instruments is a COAXIAL MECHANICAL PHASE SHIFTER with 0-348.75° phase shift range, 6000-18000 MHz frequency range, and 30 dBm CW power handling. Ideal for RF/Microwave applications requiring precise phase control in high-power environments.
HMC538LP4ETR
Analog Devices' HMC538LP4ETR is a 24-terminal RF phase shifter with plastic/epoxy package. It operates b/w -40 °C to 85°C, suitable for surface mount applications in RF/microwave systems requiring precise phase control.
HMC648LP6E
Analog Devices' HMC648LP6E is a RF/Microwave Phase Shifter with 8 dB max insertion loss, 0-360° phase shift range, and 2900-3900 MHz operating frequency. Ideal for applications requiring precise phase control in the 50 ohm system, such as radar systems and communication equipment.
HMC642LC5RTR
Analog Devices' HMC642LC5RTR is a GaAs RF phase shifter with 32 terminals, operating from -40°C to 85°C. It has a power supply of ±5V and comes in a ceramic package for surface mount applications in RF/Microwave systems.
HMC538LP4
HMC538LP4 by Analog Devices is a RF/Microwave Phase Shifter with 24 terminals, operating frequency range of 6-15 GHz, and max insertion loss of 11 dB. It offers a phase shift range from 0 to 360°, making it ideal for applications requiring precise phase control in communication systems. The component is constructed using plastic/epoxy material and can handle up to 25 dBm CW input power.
TGP2108-SM
Qorvo
Qorvo's TGP2108-SM is a RF/Microwave Phase Shifter with 24 terminals, operating from -40 to 85°C. Featuring GaAs technology, it offers a phase shift range of 5-360° at frequencies b/w 2500-4000 MHz. Ideal for applications requiring precise phase control in a compact surface mount package.
TGP2105-SM
Qorvo's TGP2105-SM is a RF/Microwave Phase Shifter with max. input power of 30 dBm, min. operating freq. of 6000 MHz, and max. phase shift of 360°. Ideal for digitally controlled applications in the range of 6000-18000 MHz, this ceramic-packaged component offers precise phase adjustments in various RF systems.
HMC649LP6ETR
Analog Devices' HMC649LP6ETR is a RF/Microwave Phase Shifter with +-5V power supplies, 28 terminals, and GAAS technology. Operating b/w -40 °C to 85°C, it consumes a max of 15mA current. Ideal for applications requiring COAXIAL MECHANICAL PHASE SHIFTER in surface mount installations.
HMC934LP5ETR
Hittite Microwave
PHASE SHIFTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
HMC931LP4ETR
Analog Devices' HMC931LP4ETR is a RF/Microwave Phase Shifter with 24 terminals. It operates b/w -40 °C to 85°C, featuring a plastic/epoxy package body material. Ideal for applications requiring precise phase shifting in surface mount setups.
HMC647LP6TR
COAXIAL MECHANICAL PHASE SHIFTER;
HMC647LP6ETR
HMC642
Analog Devices' HMC642 is a COAXIAL MECHANICAL PHASE SHIFTER with 50 ohm impedance, offering 0-360° phase shift. With a max insertion loss of 8.5 dB and CW input power up to 30 dBm, it operates b/w 9-12500 MHz. Ideal for RF/Microwave applications requiring precise phase adjustments in temperatures ranging from -55 to 85 °C.
HMC932LP4ETR
PHASE SHIFTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -40 Cel; Package Equivalence Code: LCC24,.16SQ,20;
HMC933LP4E
Analog Devices' HMC933LP4E is a RF/Microwave Phase Shifter with 0-360° phase shift range, 18-24 GHz frequency operation, and 26 dBm CW input power. Ideal for applications requiring precise phase control in the temperature range of -40 to 85°C.
984-1
Api Technologies
PHASE SHIFTER;
MAPS-011007-TR0500
M/a-com Technology Solutions
MAPS-011007-TR0500 by M/a-com Technology Solutions is a RF/Microwave Phase Shifter with 24 terminals, operating frequency range of 1200-1400 MHz, and digitally controlled phase shifting capability up to 360°. It features a max insertion loss of 5.4 dB, VSWR of 1.4, and operates at temperatures from -40 to 85°C. Ideal for applications requiring precise phase control in RF/microwave systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
Analog Devices' HMC932LP4ETR is a 24-terminal RF phase shifter with plastic/epoxy package. Operating temp ranges from -40°C to 85°C. Ideal for surface mount applications in RF/Microwave systems requiring precise phase control.
HMC932LP4E
HMC932LP4E by Analog Devices is a RF/Microwave Phase Shifter with 50 ohm impedance, offering phase shift from 0 to 360°. It has a wide frequency range of 12-18 GHz and can handle up to 26 dBm CW power. Ideal for applications requiring precise phase control in high-frequency communication systems.
PHASE SHIFTER; Minimum Phase Shift: 0 deg; Maximum Input Power (CW): 26 dBm; Construction: COMPONENT; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
PHASE SHIFTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC32,.2SQ,20; Minimum Operating Temperature: -40 Cel;
HMC928LP5E
PHASE SHIFTER; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Maximum Phase Shift: 360 deg;
HMC928LP5ETR
PHASE SHIFTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Package Equivalence Code: LCC32,.2SQ,20;
HMC929LP4E
PHASE SHIFTER; Terminal Finish: Matte Tin (Sn); Minimum Operating Frequency: 4000 MHz; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
HMC929LP4ETR
PHASE SHIFTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Package Equivalence Code: LCC24,.16SQ,20;
HMC931LP4E
PHASE SHIFTER; Terminal Finish: Matte Tin (Sn); Minimum Phase Shift: 0 deg; Minimum Operating Frequency: 8000 MHz; Maximum Phase Shift: 360 deg; Characteristic Impedance: 50 ohm;
PHASE SHIFTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC24,.16SQ,20; Maximum Operating Temperature: 85 Cel;
PHASE SHIFTER; Construction: COMPONENT; JESD-609 Code: e3; Maximum Input Power (CW): 26 dBm; Maximum Operating Frequency: 24000 MHz; Characteristic Impedance: 50 ohm;
HMC934LP5E
PHASE SHIFTER; Maximum Phase Shift: 360 deg; JESD-609 Code: e3; Minimum Phase Shift: 0 deg; Maximum Input Power (CW): 27 dBm; Maximum Operating Frequency: 2000 MHz;
HMC936ALP6E
DIGITALLY CONTROLLED PHASE SHIFTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 28; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 5; Minimum Operating Frequency: 1200 MHz;
DIGITALLY CONTROLLED PHASE SHIFTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 28; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
COAXIAL MECHANICAL PHASE SHIFTER; Maximum Insertion Loss: 7 dB; Construction: COMPONENT; Maximum Phase Shift: 360 deg; Maximum Operating Frequency: 1400 MHz; Characteristic Impedance: 50 ohm;
HMC936LP6ETR
COAXIAL MECHANICAL PHASE SHIFTER; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved