Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC713MS8 is a RF/Microwave Detector with 12 dBm CW power input, operating from -40 to 85°C. It has a threshold detector type, 50 ohm impedance, and operates b/w 100 MHz to 2700 MHz. Ideal for applications requiring precise signal detection in RF/microwave systems.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$1.439
$1.338
IDEA Electronic Components Group
$1.547
$1.470
DigiPath Technology Company
$2.413
$2.317
One Stop Electronics
$4.000
Semicontronic
$12.000
$11.700
$11.640
AZTECH Wire
$18.225
Ampacity Inc.
$22.000
Authorized Procurement Solutions
Corphita
With a high maximum input power, this RF/Microwave Detector can handle strong signals without getting damaged, ensuring reliable performance.
Being a component type detector allows for easy integration into various RF systems, making it versatile and suitable for different applications.
The high maximum operating temperature provides reliability and stability in a wide range of environmental conditions, making it suitable for various industrial settings.
With a low minimum operating temperature, this detector can function in extreme cold environments, expanding its usability in various situations.
The use of Tin/Lead terminal finish ensures good conductivity and durability, enhancing the overall performance and longevity of the RF/Microwave Detector.
The threshold detection capability allows for precise signal detection and measurement, making it ideal for applications where specific threshold levels need to be identified.
Having a 50 ohm characteristic impedance ensures compatibility with standard RF equipment, making it easy to integrate into existing systems without impedance matching issues.
The low minimum operating frequency allows this detector to detect signals at lower frequencies, making it suitable for a wide range of RF applications.
With a high maximum operating frequency, this detector can handle signals in the microwave range, providing versatility for applications requiring higher frequency detection.
RF/Microwave Detectors HMC713MS8 attributes and parameters. Explore more RF/Microwave Detectors devices from Analog Devices
Additional Features:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
HMC713MS8 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
Fairchild Semiconductor
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
Bharat Electronics
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
MAX2209EBS+TG45
Maxim Integrated
THRESHOLD DETECTOR; JESD-609 Code: e1; Terminal Finish: TIN SILVER COPPER;
423B
Broadcom
LINEAR DETECTOR; Construction: COAXIAL; Maximum Input Power (CW): 23 dBm; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: 0 Cel; Output Polarity: NEGATIVE;
HMC439QS16GETR
Analog Devices
Analog Devices' HMC439QS16GETR is a 50 ohm RF phase detector with -10 dBm min input power, 13 dBm max CW input power, and 10-1300 MHz operating frequency range. Ideal for RF/microwave applications, it operates b/w -40 to 85 °C and features matte tin terminal finish.
LT5537EDDB#TRMPBF
Analog Devices' LT5537EDDB#TRMPBF is a 50 ohm linear detector with a frequency range of 10-1000 MHz. It can handle up to 22 dBm CW input power and operates b/w -40°C to 85°C. Ideal for RF/microwave applications requiring precise power detection in various environments.
MAX2207EBS+T10
THRESHOLD DETECTOR; Terminal Finish: TIN SILVER COPPER; JESD-609 Code: e1;
HMC713MS8ETR
Hittite Microwave
THRESHOLD DETECTOR;
33330B-001
LINEAR DETECTOR; Minimum Operating Temperature: -65 Cel; Maximum Operating Temperature: 100 Cel; Minimum Operating Frequency: 10 MHz; Additional Features: APC-3.5-M; SMC-M; Maximum Voltage Standing Wave Ratio: 1.5;
LT5537EDDB#TR
Analog Devices' LT5537EDDB#TR is a 50 ohm linear detector with 10-1000 MHz frequency range, -40 to 85°C operating temp, and 22 dBm CW input power. Ideal for RF applications requiring precise power detection in components.
HMC610LP4TR
HMC610LP4TR by Analog Devices is a RF/Microwave Detector with 20 dBm CW input power, 5V supply, and 50 ohm impedance. It operates from -40 to 85°C, consumes 118mA max current, and covers frequencies up to 3900 MHz. Ideal for linear detection applications in surface mount setups.
LTC5507ES6#PBF
LTC5507ES6#PBF by Analog Devices is a RF/Microwave Detector with 50 ohm impedance, operating from 0.1 MHz to 1000 MHz. It has a max input power of 14 dBm and min input power of -34 dBm. This linear detector is ideal for applications requiring precise RF power measurements in temperature range of -40°C to 85°C.
33330C
Broadcom's 33330C is a COAXIAL RF/Microwave Detector with max input power of 23 dBm. It has a VSWR of 2.2 and output sensitivity of 180 mV/mW. Ideal for linear detection applications in the frequency range of 10 MHz to 26.5 GHz, operating b/w -65°C to +100°C temperature range.
LTC5535ES6#TR
LTC5535ES6#TR by Analog Devices is a RF/Microwave Detector with 50 ohm impedance, operating frequency range of 600-7000 MHz, and -32 dBm min input power. It can handle up to 12 dBm CW input power and operates b/w -40 °C to 85°C. This linear detector is ideal for applications requiring precise RF power measurements in various components.
HMC612LP4
HMC612LP4 by Analog Devices is a RF/Microwave Detector with 10 dBm CW input power, operating from -45°C to 85°C. It features a threshold detector for frequencies ranging from 50 MHz to 3 GHz. Ideal for applications requiring positive output polarity and a characteristic impedance of 50 ohms.
MAX2209AEBS+T10G45
LT5537EDDB
Analog Devices' LT5537EDDB is a 50 ohm linear detector with 10-1000 MHz frequency range, -40 to 85°C operating temp, and 22 dBm CW input power. Ideal for RF/microwave applications requiring precise power detection in components.
LTC5582HDD#3ZZPBF
LTC5582HDD#3ZZPBF by Analog Devices is a RF/Microwave Detector with 24 dBm CW input power, AEC-Q100 screening level, and 10 terminals. It operates from -40 to 125 °C, requires 3.3V supply, and has a max frequency of 10 GHz. Ideal for linear detection applications in components with characteristic impedance of 50 ohms.
LTC5507ES6#TR
LTC5507ES6#TR by Analog Devices is a RF/Microwave Detector with 50 ohm impedance, -34 dBm min input power, and 1000 MHz max operating frequency. It is a linear detector suitable for applications requiring precise power measurements in the range of -40 to 85°C.
ADL6012ACPZN-R7
ADL6012ACPZN-R7 by Analog Devices is a RF/Microwave Detector with 20 dBm CW input power, 1.92 max VSWR, and 5V supply. Ideal for linear detection applications in the frequency range of 2-67000 MHz. It features a plastic/epoxy package, operates b/w -40 to 105 °C, and has 10 terminals with nickel palladium gold finish.
LT5538IDD#PBF
Linear Technology
THRESHOLD DETECTOR; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 40 MHz; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
33330C-003
LINEAR DETECTOR; Minimum Operating Temperature: -65 Cel; Additional Features: APC-3.5-M; SMC-M; Maximum Operating Temperature: 100 Cel; Maximum Input Power (CW): 23 dBm; Output Polarity: POSITIVE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
THRESHOLD DETECTOR; Minimum Operating Frequency: 45 MHz; Maximum Input Power (CW): 12 dBm; Maximum Operating Frequency: 2700 MHz;
HMC713MS8E
THRESHOLD DETECTOR; Minimum Operating Frequency: 100 MHz; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 2700 MHz; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 12 dBm;
HMC713MS8TR
HMC714LP5
LINEAR DETECTOR; Characteristic Impedance: 50 ohm; Output Polarity: NEGATIVE; Additional Features: SMA; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel;
HMC714LP5E
LINEAR DETECTOR; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 15 dBm; Characteristic Impedance: 50 ohm; Construction: COMPONENT; Minimum Operating Frequency: 100 MHz;
LINEAR DETECTOR; JESD-609 Code: e0; Additional Features: SMA; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 15 dBm; Terminal Finish: Tin/Lead (Sn/Pb);
THRESHOLD DETECTOR; Maximum Operating Frequency: 2700 MHz; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 100 MHz;
HMC713MS8
THRESHOLD DETECTOR; Maximum Input Power (CW): 12 dBm; Maximum Operating Temperature: 85 Cel; Additional Features: SMA; Maximum Operating Frequency: 2700 MHz; Terminal Finish: Tin/Lead (Sn/Pb);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved