Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC572LC5RTR is a RF/Microwave Up/Down Converter with 32 terminals, operating at -55 to 85°C. Utilizing GaAs technology, it requires 3.5V supply voltage and draws a max current of 150mA. Ideal for surface mount applications in various communication systems.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$0.798
$0.742
IDEA Electronic Components Group
$0.858
$0.815
DigiPath Technology Company
$1.338
$1.285
One Stop Electronics
$2.000
Semicontronic
$10.000
$9.750
$9.700
AZTECH Wire
$10.647
Ampacity Inc.
$24.000
Corphita
The ceramic package material provides excellent thermal conductivity and stability, allowing for efficient heat dissipation and reliable performance in high temperature environments.
The lower power supply voltage of 3.5V results in reduced power consumption and improved efficiency, making it suitable for applications requiring low power operation.
The high number of terminals allows for versatile connectivity options and integration with various systems, increasing flexibility in application setups.
The high maximum operating temperature of 85°C ensures reliable performance even in extreme environmental conditions, making it suitable for demanding applications.
The wide range of minimum operating temperature of -55°C enables operation in cold environments without compromising performance, making it suitable for diverse applications.
The GaAs technology offers high frequency operation, low noise, and excellent linearity, making it ideal for RF/microwave applications requiring high performance and precision.
The maximum supply current of 150 mA ensures efficient power usage and long-term reliability, making it suitable for battery-operated or low power applications.
The surface mounting feature enables easy installation and integration into compact systems, saving space and simplifying assembly processes.
RF/Microwave Up/Down Converters HMC572LC5RTR attributes and parameters. Explore more RF/Microwave Up/Down Converters devices from Analog Devices
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
Sub-Category:
Maximum Supply Current:
Technology:
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Sangdest Microelectronics (Nanjing)
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
F1152NBGI8
Renesas Electronics
DOWN CONVERTER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
MAX2680EUT+
Analog Devices
MAX2680EUT+ by Analog Devices is an RF down converter with 1.5 VSWR, -40 to 85 °C operating temp range, and 5.7 dB min gain. Ideal for applications requiring a min RF input of 400 MHz, LO tunability, and IF range from 10 MHz to 500 MHz.
UPC2744GS-E1
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Supply Current: 59 mA;
MAX2720EUP-T
Maxim Integrated
UP CONVERTER; Minimum RF Output Frequency: 1700 MHz; Terminal Finish: TIN LEAD; Construction: COMPONENT; LO Tunable: YES; Minimum Operating Temperature: -40 Cel;
HMC1113LP5E
HMC1113LP5E by Analog Devices is a RF/Microwave DOWN CONVERTER with 32 terminals, operating at temperatures from -40 to 85 °C. It features a min Down Conversion Gain of 9 dB, Max Noise Figure of 2.5 dB, and operates b/w RF Input Frequencies of 10-16 GHz. Ideal for applications requiring high-performance RF signal conversion in various electronic systems.
MAX2681
MAX2681 by Analog Devices is a RF/Microwave DOWN CONVERTER with 14.2 dB Min Gain, 400-2500 MHz RF Input Frequency range, and 10-500 MHz IF. It features LO Tuning capability and 7 dB Noise Figure. Ideal for applications requiring high-performance frequency conversion in RF systems.
HPMX-7102-TR1
Broadcom
DOWN CONVERTER; Minimum Operating Temperature: -40 Cel; Terminal Finish: Tin/Lead (Sn/Pb); Maximum RF Input Frequency: 894 MHz; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 85 Cel;
TFF1004HN/N1/T3
NXP Semiconductors
TFF1004HN/N1/T3 by NXP Semiconductors is an RF/Microwave Up/Down Converter designed for surface mount applications. It operates b/w -40 °C to 85 °C, requires a 3.3V supply, and features 24 terminals with a max current of 125mA. Ideal for communication systems and signal processing.
MAX2104CCM+D
DOWN CONVERTER; LO Tunable: YES; Minimum RF Input Frequency: 925 MHz; Characteristic Impedance: 50 ohm; Minimum Input Power (CW): -25 dBm; Terminal Finish: Matte Tin (Sn);
GC1012A-PQ
Texas Instruments
GC1012A-PQ by Texas Instruments is a CMOS RF down converter with 120 terminals. It operates at temperatures from -40°C to 85°C and requires power supplies of 3.3V/5V. Ideal for RF/Microwave applications, it features LO tunability and surface mounting capability.
MAX2261EUT-T
Analog Devices' MAX2261EUT-T is an RF/Microwave Up/Down Converter with 6 terminals, operating b/w -40 °C to 85°C. It requires 3/5V power supply, draws a max current of 11.3mA, and features surface mounting. Ideal for applications requiring high-frequency signal conversion in various electronic systems.
TRF1121IRGZT
TRF1121IRGZT by Texas Instruments is an RF up converter with 1500-2500 MHz output frequency range, LO tunable feature, and 48 terminals. It operates at -40 to 85°C, requires 5V power supply, and has a max output power of 0 dBm. Ideal for applications requiring RF signal conversion in various electronic systems.
LTC5577IUF#PBF
LTC5577IUF#PBF by Analog Devices is an RF/Microwave Up/Down Converter with a 3.3V power supply, LO tunable feature, and 16 terminals. It operates b/w -40°C to 105°C, supports RF input frequencies from 300 MHz to 6000 MHz, and has a noise figure of 14 dB. Ideal for applications requiring high-performance RF conversion in a compact surface-mount package.
UPC1686G
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: SOP8,.25;
HMC6146BLC5ATR
Analog Devices' HMC6146BLC5ATR is a RF up converter with 40-44 GHz output frequency range, 7 dB min gain, and GaAs technology. Ideal for applications requiring high-frequency conversion in RF/microwave systems. Features include ceramic package, gold over nickel terminal finish, and LO tunability.
HMC7912LP5ETR
Analog Devices' HMC7912LP5ETR is a RF up converter with 21-24 GHz output frequency range, 10 dB min gain, and 4 dBm max output power. Ideal for applications requiring high-frequency conversion in RF/microwave systems.
IAM-81008-TR1
Hewlett Packard
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: SOP8,.25;
MAX2681EUT+T
Analog Devices' MAX2681EUT+T is a RF/Microwave Down Converter with 1.5 VSWR, 6.7 dB min gain, and 400-2500 MHz RF input range. It operates at -40 to 85°C, consumes 21.8 mA at 3/5V, and has LO tunability for various applications in wireless communication systems.
HMC966LP4ETR
Analog Devices' HMC966LP4ETR is a GAAS technology RF down converter with 24 terminals, operating b/w -55 °C to 85°C. It requires a 4.5V power supply and draws a max current of 200mA. Ideal for RF/Microwave applications, it features a surface mount package body made of plastic/epoxy with matte tin terminal finish.
TRF1112IRGZTG3
TRF1112IRGZTG3 by Texas Instruments is a RF down converter with freq range 1700-2400 MHz, gain of 90 dB, and noise figure of 4.7 dB. It's ideal for applications requiring high performance in wireless communication systems operating b/w -40 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
HMC567LC5
DOWN CONVERTER; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Construction: COMPONENT; JESD-609 Code: e4; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm;
HMC567LC5RTR
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: CERAMIC; Technology: GAAS; Minimum Operating Temperature: -55 Cel;
HMC567LC5TR
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: CERAMIC; Technology: GAAS; Maximum Supply Current: 195 mA;
HMC570LC5RTR
HMC571LC5RTR
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: CERAMIC; Technology: GAAS; Package Equivalence Code: LCC32,.2SQ,20;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved