Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC463LP5E is a wide band low power RF amplifier with 8 dB gain, operating from 2-20 GHz. It has a max input power of 23 dBm and operates on a 5V supply. Ideal for applications requiring high frequency amplification in RF & microwave systems.
Median Price
$260.920
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
$226.480
100+ parts
$191.378
1k+ parts
$157.520
10k+ parts
-
Farnell
$235.060
Mouser Electronics
$220.750
DigiKey
$220.748
Newark
$268.750
$231.940
Element14
$374.850
Verical
Digiode
$178.182
Nova Conductors
$188.048
Vyrian
Chip Stock
Parana Technologies
$2.611
$2.429
IDEA Electronic Components Group
$2.808
$2.668
Advanced Electronics
$3.073
$2.796
$2.520
DigiPath Technology Company
$4.380
$4.205
AZTECH Wire
$13.548
Microchip USA
$145.520
$142.990
$141.720
$140.460
Semicontronic
$159.430
$155.444
$154.647
Ampacity Inc.
Continental Prestige Electronics
$163.890
Corphita
$168.804
Netroflash
$178.645
$174.884
Lixinc
Metaverse IC Inc.
GreenTree Electronics
Argo Parts USA
Perfect Parts
Futuretech Components
PLASTIC/EPOXY material provides good durability and thermal properties, making the product reliable for long-term use.
With a maximum input power of 23 dBm, this amplifier can handle high power levels effectively, making it suitable for demanding applications.
Being a component-based construction, this amplifier offers flexibility in customization and integration into various systems.
Operating at a low voltage of 5V, this amplifier is energy-efficient and can be easily powered by common power sources.
With 32 terminals, this amplifier allows for versatile connectivity options and signal routing configurations.
The high maximum operating temperature of 85°C ensures stable performance even in demanding environmental conditions.
The low minimum operating temperature of -40°C allows this amplifier to operate in a wide range of temperature environments.
The matte tin terminal finish provides good conductivity and corrosion resistance, ensuring reliable signal transmission.
Utilizing Gallium Arsenide (GaAs) technology, this amplifier offers high performance and low noise characteristics for RF and microwave applications.
Being a wide band low power device, this amplifier is suitable for a variety of frequency ranges while maintaining low power consumption.
With a characteristic impedance of 50 ohm, this amplifier is compatible with standard RF transmission lines and components.
Offering a gain of 8 dB, this amplifier can boost signal levels effectively without introducing excessive noise.
Supporting a minimum operating frequency of 2000 MHz, this amplifier is suitable for a wide range of RF and microwave applications.
Featuring a surface mounting feature, this amplifier can be easily integrated onto circuit boards for compact and space-saving designs.
With a maximum operating frequency of 20000 MHz, this amplifier is capable of handling high-frequency signals with precision and stability.
RF & Microwave Amplifiers HMC463LP5E attributes and parameters. Explore more RF & Microwave Amplifiers devices from Analog Devices
Additional Features:
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Technology:
Terminal Finish:
HMC463LP5E RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
Good-ark Electronics
Rfe International
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
HMC8205BF10
Analog Devices
Analog Devices' HMC8205BF10 is a wideband high-power RF amplifier with 25 dB gain and 35 dBm CW input power. Operating from 300 MHz to 6 GHz, it features a characteristic impedance of 50 ohms. Ideal for applications requiring high-power amplification in RF and microwave systems.
SPF5043ZSQ
Qorvo
SPF5043ZSQ by Qorvo is a GAAS RF amplifier with 11.4 dB gain, operating from 50 MHz to 4000 MHz. It has a max input power of 25 dBm and operates at temperatures ranging from -40°C to 85°C. Ideal for wideband low-power applications requiring surface mount technology.
HMC499LC4TR
Hittite Microwave
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
MGA-631P8-BLKG
Broadcom
Broadcom's MGA-631P8-BLKG is a GAAS RF amplifier with 16dB gain, operating from 400MHz to 1500MHz. It has a max input power of 20dBm and uses a 4V power supply. Ideal for wideband low-power applications, this component features surface mounting and a characteristic impedance of 50Ω.
ADL9005ACPZN-R7
ADL9005ACPZN-R7 by Analog Devices is a wide band low power RF amplifier with 17 dB gain and 1.49 VSWR. Operating from 10 MHz to 26.5 GHz, it has a max input power of 22 dBm and operates on a 5V supply. Ideal for RF and microwave applications requiring high performance in a compact surface mount package.
MSA-1105
Avantek
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 5.5;
HMC516LC5TR
HMC516LC5TR by Analog Devices is a GAAS wide band low power RF amplifier with 1 function and 32 terminals. It operates at temperatures ranging from -40 to 85°C and requires a power supply of 3V, drawing a max current of 88mA. This surface mount package is suitable for various RF and microwave applications.
RF5110GTR7
Rf Micro Devices
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Technology: HYBRID; JESD-609 Code: e3; Maximum Supply Current: 2400 mA;
QPA1010D
Qorvo's QPA1010D is a GAN RF amplifier with 30 dBm CW input power, 23.1 dB gain, and 50 ohm impedance. Ideal for wideband high-power applications from 7900 MHz to 11000 MHz, it features a VSWR of 3 and operates on -1.9V to 24V supplies.
M57706L
Mitsubishi Electric
The Mitsubishi Electric M57706L is a RF & Microwave Amplifier module with 26 dBm CW input power, 4 VSWR, and operates b/w 135-145 MHz. It features hybrid technology, 50 ohm impedance, and is designed for narrow band high power applications in temperatures ranging from -30 to 110°C.
HMC441LP3E
Analog Devices' HMC441LP3E is a wide band low power RF amplifier with 10 dB gain and 50 ohm impedance. It operates from 6.5 to 13.5 GHz, handling up to 15 dBm CW input power. This component is ideal for RF and microwave applications requiring surface mount technology in temperatures ranging from -40°C to +85°C.
HMC8412LP2FETR
HMC8412LP2FETR by Analog Devices is a wide band low power RF amplifier with 12 dB gain, operating from 400 MHz to 11 GHz. It has a max input power of 25 dBm and VSWR of 1.375, suitable for applications requiring high frequency amplification in RF & microwave systems. With a compact surface mount construction and operating temperatures from -40°C to 85°C, it offers reliable performance in various environments.
HMC462
WIDE BAND LOW POWER; Technology: GAAS; Gain: 12 dB; Package Equivalence Code: DIE OR CHIP; No. of Functions: 1; Power Supplies (V): 5;
HELA-10+
Mini-circuits
HELA-10+ by Mini-circuits is a wideband medium power RF amplifier with 9.5 dB gain, operating from 50 MHz to 1000 MHz. It has a max input power of 20 dBm and VSWR of 1.22, suitable for applications requiring high-frequency amplification in RF & microwave systems.
HMC453ST89ETR
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; No. of Functions: 1;
MAMX-011009-TR1000
M/a-com Technology Solutions
WIDE BAND MEDIUM POWER;
HMC498LC4
Analog Devices' HMC498LC4 is a GAAS RF amplifier with 18dB gain, operating from 17-24GHz. It has a max input power of 10dBm and operates on a 5V supply. This wideband medium-power device is ideal for RF and microwave applications requiring high performance in a compact ceramic package.
QPA1010
Qorvo's QPA1010 is a GAN technology RF amplifier with 21.1 dB gain, operating from 7900-11000 MHz. It offers 30 dBm CW input power, VSWR of 3, and -1.8 to 24V power supplies. Ideal for wideband high-power applications with a surface-mount package body material made of plastic/epoxy.
TGA2578-CP
Triquint Semiconductor
WIDE BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Technology: GAN; Maximum Supply Current: 400 mA; Maximum Voltage Standing Wave Ratio: 10;
AG302-86G
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
HMC451LP3ETR
WIDE BAND LOW POWER; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 5000 MHz; Gain: 12.5 dB; Construction: COMPONENT; Characteristic Impedance: 50 ohm;
HMC451LP3ETR by Analog Devices is a GAAS RF amplifier with 12.5 dB gain, operating from 5V supply at frequencies ranging from 5-18 GHz. With a max input power of 10 dBm, it's ideal for wideband low-power applications in RF and microwave systems requiring surface mount components.
HMC441LP3ETR
Analog Devices' HMC441LP3ETR is a GAAS RF amplifier with 10dB gain, operating from 6.5 to 13.5GHz, handling up to 15dBm CW input power. With a compact surface-mount package and low power consumption of 115mA at 5V, it's ideal for wideband applications in RF and microwave systems.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Terminal Finish: Matte Tin (Sn);
HMC441LC3BTR
HMC441LC3BTR by Analog Devices is a wide band medium power RF amplifier with a gain of 10 dB. It operates at frequencies ranging from 6 GHz to 18 GHz and can handle a max input power of 15 dBm. This surface mount component is commonly used in RF and microwave applications requiring high performance amplification.
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC12,.12SQ,20;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Frequency: 13500 MHz;
HMC441LC3B
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Supply Current: 115 mA;
Analog Devices' HMC441LC3B is a wide band medium power RF amplifier with 10 dB gain, operating from 6-18 GHz. It has a max input power of 15 dBm and operates on a 5V supply, drawing 115 mA. Ideal for RF & microwave applications requiring high performance in plastic/epoxy package.
HMC451LP3E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 5000 MHz;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Supply Current: 150 mA;
HMC451LC3TR
Analog Devices' HMC451LC3TR is a wide band low power RF amplifier with 14 dB gain, operating from 5-20 GHz. It features a max input power of 10 dBm and operates in temperatures ranging from -40 to 85°C. Ideal for RF and microwave applications requiring high performance in a compact ceramic package.
WIDE BAND LOW POWER; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT; Maximum Operating Frequency: 20000 MHz; Gain: 14 dB; Characteristic Impedance: 50 ohm;
HMC441LP3
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Construction: COMPONENT;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 6500 MHz;
HMC462LP5ETR
Analog Devices' HMC462LP5ETR is a GAAS technology RF amplifier with 32 terminals, operating from -40 to 85°C. It requires a 5V power supply, drawing a max of 84mA. This wideband low-power device is ideal for surface mount applications in RF and microwave systems.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC451LC3
HMC451LC3 by Analog Devices is a wide band low power RF amplifier with 14 dB gain and operates b/w 5-20 GHz. It has a max input power of 10 dBm, requires 5V supply, and features a surface mount package ideal for RF & microwave applications.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 10 dBm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved