Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DS1302SN+ by Analog Devices is a CMOS peripheral IC with 3/5V power supplies, operating from -40 to 85°C. It features a serial, 3-wire access method and small outline package style for real-time clock applications. The timer has a max clock frequency of 0.032 MHz and is surface mountable with 8 terminals in a rectangular shape.
Median Price
$6.760
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
$5.070
100+ parts
-
1k+ parts
$2.860
10k+ parts
Farnell
$5.591
$4.111
$3.504
$2.808
DigiKey
$4.419
$4.051
$3.850
Mouser Electronics
$6.960
$4.430
$4.150
$4.080
Newark
$4.820
$4.300
Element14
$8.450
$5.490
$5.090
Adafruit Industries
$62.047
$58.945
Arrow
$3.580
Verical
Nova Conductors
$3.474
Voyager Components
$4.701
Digiode
$5.311
Anansix
Vyrian
Bristol Electronics
Rebound Electronics
LWI Electronics Inc
ComSIT Distribution GmbH
LIBRA Elektronik GmbH
Semicontronic
$2.060
$2.008
$1.998
Aranea Global
$3.404
$3.268
Argo Parts USA
$3.450
Continental Prestige Electronics
$3.520
$2.340
Ampacity Inc.
$4.490
Corphita
$5.032
Allen Electronics Distributors
$23.875
MARBEL Systems
$33.241
Texas Native Microelectronics
$38.208
$33.623
Kenton Components
$45.850
$40.348
Modulus Dynamics
$46.983
$45.104
$43.224
Corohmni
$58.847
Advanced Electronics
Qasali Group International
$103.162
$90.782
QUARKTWIN TECHNOLOGY LTD
Infinite Electronics LLP (Excess)
Microchip USA
CPlus Electronics
Authorized Procurement Solutions
Kepictronics
Lixinc
A-Z Elektronik GmbH
PLASTIC/EPOXY material provides durability and allows for a compact design, making this product suitable for various applications.
The SERIAL, 3-WIRE access method offers versatility and ease of use in connecting the timer or real-time clock to other devices or systems.
Surface mount capability enables easy and efficient integration of the product onto circuit boards, saving space and simplifying assembly processes.
The high maximum supply voltage of 5.5 V provides flexibility in power options and ensures stable performance even under varying voltage conditions.
The RECTANGULAR package shape allows for a neat and organized layout on a PCB, enhancing overall aesthetics and functionality.
Support for both 3V and 5V power supplies makes this product compatible with a wide range of systems and applications, increasing its usability.
Having 8 terminals provides sufficient connectivity options and allows for easy interfacing with other components, enhancing the product's versatility.
Lack of interrupt capability may limit some advanced functionalities, but can also simplify the design and implementation of the product for certain applications.
The SMALL OUTLINE package style offers a compact form factor, ideal for space-constrained environments where size matters.
The low minimum supply voltage of 2 V allows for operation in systems with lower power constraints, broadening the product's range of applications.
With a high maximum operating temperature of 85 °C, this product can withstand harsh environmental conditions, ensuring reliable performance in various settings.
The low minimum operating temperature of -40 °C enables the product to function in cold environments without compromising performance or accuracy.
Matte Tin terminal finish provides corrosion resistance and reliable connections, ensuring long-term durability and stability of the product.
Dual terminal position offers flexibility in installation and compatibility with different PCB layouts, making it easier to integrate the product into existing systems.
The low maximum seated height of 2.13 mm allows for a low-profile design, making this product suitable for applications where space is limited.
The width of 5.285 mm offers a compact footprint, enabling the product to be easily incorporated into tight spaces or crowded PCB layouts.
The maximum clock frequency of 0.032 MHz provides precise timing and synchronization capabilities, crucial for applications requiring accurate timekeeping.
The ability to withstand a peak reflow temperature for 30 seconds ensures reliable soldering and assembly processes, contributing to the product's overall quality.
The high peak reflow temperature of 260°C allows for efficient and effective soldering, ensuring secure connections and robust performance.
The length of 5.31 mm contributes to the overall compact design of the product, making it suitable for applications where space is at a premium.
The INDUSTRIAL temperature grade signifies that this product can operate reliably in harsh industrial environments, offering durability and longevity in demanding applications.
Being a TIMER and REAL TIME CLOCK, this product provides accurate timing functionality, making it ideal for applications that require precise timekeeping and scheduling capabilities.
The CMOS technology used in this product offers low power consumption, high reliability, and compatibility with a wide range of systems, enhancing its overall performance and efficiency.
The GULL WING terminal form provides secure and reliable connections, making it easy to integrate the product into existing circuitry and ensuring stable operation.
Ability to measure time in seconds allows for accurate and precise timekeeping, essential for applications that require timing at a granular level.
The 3.3 V nominal supply voltage is common in many electronic systems, ensuring compatibility and ease of integration with existing setups.
The 1.27 mm terminal pitch offers easy soldering and assembly, facilitating the installation of the product onto PCBs and ensuring reliable connections.
The volatile memory feature allows for temporary storage of data and settings, offering flexibility and functionality in applications that require volatile memory capabilities.
Timers & Real-Time Clocks DS1302SN+ attributes and parameters. Explore more Timers & Real-Time Clocks devices from Analog Devices
Additional Features:
Maximum Clock Frequency:
Information Access Method:
Interrupt Capability:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Terminals:
No. of Timers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Minimum Time:
Maximum Time At Peak Reflow Temperature (s):
Volatile:
Width:
Peripheral IC Type:
DS1302SN+ Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Renesas Electronics
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
AB1805-T3
Abracon
AB1805-T3 by Abracon is a CMOS TIMER & REAL TIME CLOCK with I2C/SERIAL access, interrupt capability, and 1.8/3.3V supplies. It operates in industrial temperature range (-40 to 85 °C) with 0.032 MHz clock frequency. Ideal for applications requiring precise timekeeping in compact designs.
M4T28-BR12SH1
STMicroelectronics
STMicroelectronics M4T28-BR12SH1 is a TIMER & REAL TIME CLOCK IC with 2.8V nominal voltage, 3V max supply voltage, and CMOS technology. It has a rectangular package shape with 4 terminals and operates b/w 0°C to 70°C. Ideal for applications requiring precise timekeeping in commercial-grade environments.
ISL12022MIBZ-T
ISL12022MIBZ-T by Renesas Electronics is a CMOS TIMER & REAL TIME CLOCK with I2C SERIAL access, operating b/w -40 to 85 °C. It has a supply voltage range of 2.7V to 5.5V and comes in a small outline rectangular package suitable for industrial applications.
MCP79401-I/MS
Microchip Technology
MCP79401-I/MS by Microchip Tech is a CMOS RTC with I2C interface, 64-word RAM, and interrupt capability. Ideal for industrial applications, it operates b/w -40 to 85°C with a supply voltage range of 1.8-5.5V. The small outline package has dual terminals and requires only 3mA max supply current at 0.032 MHz clock frequency.
MCP7940N-I/MS
MCP7940N-I/MS by Microchip Technology is a CMOS RTC with I2C interface, 64 RAM words, and interrupt capability. It operates b/w -40 to 85°C, with supply voltage range of 1.8-5.5V. Ideal for industrial applications requiring real-time clock functionality in a compact form factor.
DS1390U-33/V+T
Analog Devices
DS1390U-33/V+T by Analog Devices is a 10-terminal RTC with 3.3V supply, SPI interface, and industrial temperature grade. It's ideal for automotive applications due to AEC-Q100 screening, interrupt capability, and small outline package.
PCA85073ADP/Q900Z
NXP Semiconductors
NXP Semiconductors' PCA85073ADP/Q900Z is an 8-terminal IC with I2C access, operating at a clock frequency of 0.032768 MHz. It serves as a timer and real-time clock in industrial applications, with a supply voltage range of 1.8V to 5.5V and temperature range from -40°C to 105°C.
DS1302Z+
TIMER, REAL TIME CLOCK; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
STWD100NYWY3F
STWD100NYWY3F by STMicroelectronics is a TIMER, PROGRAMMABLE IC with 5V supply voltage range, -40 to 125°C operating temperature. It's used in automotive applications due to its small outline, low profile package style and nickel palladium gold terminal finish.
IP82C54Z
Intersil
TIMER, PROGRAMMABLE; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
DS1744P-70
Dallas Semiconductor
TIMER, REAL TIME CLOCK; Temperature Grade: COMMERCIAL; Terminal Form: J INVERTED; No. of Terminals: 34; Package Shape: RECTANGULAR; Minimum Time: SECONDS;
ISL12022MAIBZ-T
Integrated Device Technology
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
DS9034I-PCX
Maxim Integrated
DS9034I-PCX by Maxim Integrated is a TIMER & REAL TIME CLOCK with PARALLEL, DIRECT ADDRESS access method. It has 34 terminals and operates at a max clock frequency of 0.032 MHz. This CMOS technology device is commonly used in commercial applications requiring accurate timekeeping.
IP82C54-10Z
Renesas Electronics' IP82C54-10Z is a 16-bit timer IC with 3 timers, operating at up to 10 MHz. It features parallel access and direct addressing, suitable for industrial applications requiring precise timing control. The package style is in-line with a rectangular shape, making it easy to integrate into various electronic systems.
DS1682S+T&R
Analog Devices' DS1682S+T&R is a CMOS timer with 8 terminals, I2C access, interrupt capability, and operates b/w -40 to 85°C. It's a small outline package suitable for industrial applications requiring time recording and timing functions at frequencies up to 0.4 MHz.
BQ4802LYDW
BQ4802LYDW by Texas Instruments is a CMOS timer/real-time clock with 28 terminals, interrupt capability, and parallel/direct address access. It operates b/w 2.7-3.6V, has a clock frequency of 0.032 MHz, and can withstand temperatures from 0-70°C. Ideal for applications requiring precise timekeeping in commercial-grade environments.
X1226S8I
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M48T02-70PC1
M48T02-70PC1 by STMicroelectronics is a CMOS timer & real-time clock with 2040 RAM words. It operates at 5V, has a clock frequency of 0.032 MHz, and uses parallel/direct address access method. Ideal for applications requiring precise timekeeping in commercial-grade environments.
ISL1208IB8Z-T7A
ISL1208IB8Z-T7A by Renesas Electronics is a CMOS timer & real-time clock with I2C access, 8-bit RAM, and interrupt capability. It operates b/w -40 to 85°C, has a supply voltage range of 2.7-5.5V, and a clock frequency of 0.032768 MHz. Ideal for industrial applications requiring precise timekeeping in compact designs.
DS1337S+T&R
DS1337S+T&R by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C access, 1.8-5.5V supply, -40 to 85°C temp range. It has 8 terminals, interrupt capability, and is surface mountable for industrial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
DS1307ZN+T&R
DS1307ZN/T&R
DS1307ZN/T&R by Maxim Integrated is a CMOS timer/real-time clock with I2C access, 5V supply, and 0.032 MHz clock frequency. It's used in industrial applications for timekeeping due to its -40 to 85°C operating range and small outline package.
Analog Devices' DS1307ZN+T&R is a CMOS TIMER & REAL TIME CLOCK with I2C access. It operates b/w -40 to 85 °C, with supply voltage range of 4.5-5.5 V. Ideal for industrial applications requiring accurate timekeeping in compact spaces.
DS1338Z-33+T&R
DS1338Z-33+T&R by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C access. It operates at 3.3V, has 8 terminals, and supports a clock frequency of 0.032 MHz. Ideal for industrial applications requiring precise timekeeping in a compact package.
DS1338Z-33/T&R
DS1338Z-33/T&R by Maxim Integrated is a CMOS TIMER & REAL TIME CLOCK with I2C access. It operates at 3.3V, has a clock frequency of 0.032 MHz, and temperature range of -40 to 85 °C. Ideal for applications requiring precise timekeeping in industrial settings.
DS1307ZN
DS1307ZN by Maxim Integrated is a CMOS RTC IC with I2C interface, operating voltage of 4.5-5.5V, and clock frequency of 0.032 MHz. Ideal for industrial applications requiring real-time clock functionality in a small outline package with surface mount capability.
DS1307ZN+
DS1307ZN+ by Analog Devices is a CMOS timer/real-time clock with I2C access, 5V supply, and 0.032 MHz clock frequency. It operates in industrial temperature range (-40 to 85°C) and is suitable for applications requiring precise timekeeping in compact designs.
DS1307Z+T&R
DS1307Z+T&R by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C access method. It operates b/w 0-70°C, has 8 terminals, and supports voltages from 4.5V to 5.5V. Ideal for applications requiring accurate timekeeping in commercial-grade devices.
DS1307Z/T&R
DS1307Z/T&R by Maxim Integrated is a CMOS RTC IC with I2C interface, operating at 0-70°C. It has 8 terminals, 5V supply voltage, and supports clock frequency up to 0.032 MHz. Ideal for applications requiring real-time clock functionality in commercial-grade devices.
DS1338Z-33+
DS1338Z-33
Timers or RTCs; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS1338Z-33 by Maxim Integrated is a CMOS TIMER & REAL TIME CLOCK with I2C interface. It operates at 3.3V, has a clock frequency of 0.032 MHz, and temperature range of -40 to 85 °C. Ideal for applications requiring precise timekeeping in industrial settings.
DS1338Z-33+ by Analog Devices is a CMOS timer and real-time clock with I2C access method. It operates at a supply voltage of 3.3V and has a max clock frequency of 0.032 MHz. This small outline package is commonly used in industrial applications requiring accurate timekeeping.
DS1307Z
DS1307Z by Maxim Integrated is a CMOS TIMER & REAL TIME CLOCK with I2C access. It operates b/w 0-70°C, at 4.5-5.5V supply voltage, and has a clock frequency of 0.032 MHz. Ideal for applications requiring precise timekeeping in compact designs.
DS1307Z+
DS1307Z+ by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C interface. It operates b/w 4.5-5.5V, has 8 terminals, and can handle temperatures from 0-70°C. Ideal for applications requiring precise timekeeping in compact designs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved