Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' ADV7162KSZ220 is a display controller with 1600x1200 pixel resolution, CMOS technology, and 5V supply voltage. It is used in commercial applications for driving displays with a terminal pitch of 0.65mm and operating temperatures ranging from 0 to 70 °C.
Median Price
$64.770
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$57.950
10k+ parts
$54.540
DigiKey
Digiode
$68.552
Vyrian
J2 Sourcing AB
Connect4Technologies Inc.
Parana Technologies
$50.766
$47.212
IDEA Electronic Components Group
$54.587
$51.858
Semicontronic
$61.340
$59.806
$59.500
Corohmni
$64.340
Corphita
$64.944
Component Stockers USA
$73.480
$69.080
$62.470
DigiPath Technology Company
$85.156
$81.749
QUARKTWIN TECHNOLOGY LTD
Vigor
Native Components
Northwest PG Solutions
Durable and lightweight material, ideal for portable devices.
Easy to install and saves space on the circuit board.
Provides ample connectivity options for interfacing with other components.
Can withstand high temperatures, ensuring reliability under various conditions.
High resolution display for clear and detailed visuals.
Low power consumption and high noise immunity.
Standard voltage requirement for compatibility with various power sources.
Display Controllers ADV7162KSZ220 attributes and parameters. Explore more Display Controllers devices from Analog Devices
Address Bus Width:
Display Config:
External Data Bus Width:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
ADV7162KSZ220 Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Plessey Semiconductors Discrete Components Div
Other Transistors;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Diotec Semiconductor Ag
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ATMEGA328P-AU
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
UPD6462GS-001-A
Renesas Electronics
GRAPHICS PROCESSOR; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;
IMSG300F-10C
IMSG300F-10C by STMicroelectronics is a display controller with 1280x1024 pixel config, 24-bit address and data bus width. It operates at 5V, -40 to +70 °C, ideal for CRT graphics displays in commercial applications.
ADV7141KP50
Analog Devices
ADV7141KP50 by Analog Devices is a Display Controller with 44 terminals, CMOS technology, and 8-bit external data bus width. It operates b/w 0 to 70°C and supports various bus compatibilities like 8086, 80286, 80386, and 80486. Ideal for applications requiring palette DACs and display control in commercial-grade environments.
HCD66752BP
DISPLAY CONTROLLER, DOT MATRIX LCD DISPLAY; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 480; Package Shape: RECTANGULAR; Nominal Supply Voltage: 3 V;
LC74735YWS-8A43-SH-H
LC74735YWS-8A43-SH-H by Onsemi is a display controller with 80 terminals, operating at 3.3V. It features a max temp of 70 °C and supports graphics processing technology. Ideal for applications requiring high-quality image display in various electronic devices.
HD66712UA02TA0L
DISPLAY CONTROLLER, DOT MATRIX LCD DRIVER; Terminal Form: NO LEAD; No. of Terminals: 128; Package Code: DIE; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
LC74787JM
LC74787JM by Onsemi is a display controller with 24 terminals, operating at temperatures from -30 to 70 °C. It has a supply voltage of 5V and uses CMOS technology. This graphics processor IC is surface mountable and suitable for applications requiring small outline package styles.
T6963C
Toshiba
DISPLAY CONTROLLER, DOT MATRIX LCD DISPLAY; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 67; Package Code: QFP; Package Shape: RECTANGULAR;
JT7988Y-AS
DISPLAY CONTROLLER, DOT MATRIX LCD DISPLAY; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: DIE; Package Shape: RECTANGULAR;
UPD72022GF-3B9
Display Controllers; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: QFP; Package Shape: RECTANGULAR;
LC74788M
LC74788M by Onsemi is a display controller with 24 terminals, operating at temperatures from -30 to 70 °C. It has a supply voltage of 5V and uses CMOS technology. This graphics processor IC is surface mountable and suitable for applications requiring small outline package styles.
TVP3030-175PPA
Texas Instruments
TVP3030-175PPA by Texas Instruments is a display controller with 1600x1280 pixels, 8-bit data bus, and 140 MHz clock frequency. It is used in commercial applications for driving high-resolution displays efficiently. The package style includes flatpack, heat sink/slug, and fine pitch terminals for compact design.
DLP160CPFQT
DLP160CPFQT by Texas Instruments is a display controller with 640x360 pixels, operating at a max clock frequency of 540 MHz. It features a rectangular package style, surface mount capability, and operates b/w 0-70°C. Ideal for applications requiring high-resolution displays in compact electronic devices.
TLC34076-110MFN
TLC34076-110MFN by Texas Instruments is a Display Controller with 8-bit External Data Bus, 110 MHz Clock Frequency, and 5.25 V Max Supply Voltage. Ideal for military applications due to its MILITARY Temperature Grade and PALETTE DAC technology.
UPD7225GB-3B7
Renesas UPD7225GB-3B7 is a display controller IC with 56 terminals, operating at 4.75-5.25V. It supports dot matrix LCDs, clocking up to 0.2MHz, suitable for commercial-grade applications requiring a temp range of -10 to 70°C in a compact square package measuring 10x10mm with gull wing terminals.
PCF2113AU/10
NXP Semiconductors
DISPLAY CONTROLLER, DOT MATRIX LCD DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 100; Package Code: DIE; Package Shape: UNSPECIFIED;
UPD16676GF-3BA
Display Controllers; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR;
S1D13705F00A200
Seiko Epson
Seiko Epson's S1D13705F00A200 display controller features 640x480 pixels, 17-bit address bus width, and 25 MHz clock frequency. Ideal for industrial applications requiring a compact design with a low profile and fine pitch package style. Operates in temperatures ranging from -40 to 85 °C.
HD66731A01TA0L
DISPLAY CONTROLLER, DOT MATRIX LCD DRIVER; Terminal Form: NO LEAD; No. of Terminals: 165; Package Code: DIE; Package Shape: RECTANGULAR; Qualification: Not Qualified;
TLC34058-125GA
TLC34058-125GA by Texas Instruments is a display controller with 1280x1024 pixel config, 125 MHz clock freq, and 8-bit external data bus. It operates b/w 0-70°C, suitable for commercial use in various applications requiring high-resolution displays and palette DAC peripherals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADV7151LS170
DISPLAY CONTROLLER, PALETTE DAC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR;
ADV7148KP66
DISPLAY CONTROLLER, PALETTE DAC; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
ADV7141KP66
ADV7151LS110
ADV7150LS135
DISPLAY CONTROLLER, PALETTE DAC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 160; Package Code: QFP; Package Shape: SQUARE;
ADV7148KP35
ADV7151LS220
ADV7129KSZ
DISPLAY CONTROLLER, PALETTE DAC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 304; Package Code: FQFP; Package Shape: SQUARE;
ADV7150LS110
ADV7146KN35
DISPLAY CONTROLLER, PALETTE DAC; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR;
ADV7150LS85
ADV7150LS170
ADV7146KN66
ADV7151LS135
ADV7148KP50
ADV7129KS
ADV7141KP35
ADV7146KN50
ADV7150LS220
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved