Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADUM4223BRWZ-RL by Analog Devices is a peripheral driver with 2 functions, operating at 3-5.5V. It offers thermal and under voltage protection, ideal for automotive applications due to its small outline package and high temperature grade of up to 125°C. With a nominal output peak current limit of 4A, it is suitable for half bridge based interface ICs.
Median Price
$5.579
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$3.170
100+ parts
-
1k+ parts
10k+ parts
Verical
$3.826
Arrow
$4.112
$3.922
$3.732
Element14
$5.540
$3.886
$3.856
Farnell
$4.178
$3.857
Analog Devices Inc
$7.700
$4.752
$3.638
Mouser Electronics
$8.700
$5.520
$4.820
DigiKey
$9.000
$5.615
$5.125
Newark
$9.270
$5.790
$4.870
Digiode
$2.957
Cyclops Electronics Ltd
Vyrian
VNN
Nova Conductors
Ampacity Inc.
$2.650
Semicontronic
$2.584
$2.570
Corphita
$2.802
Parana Technologies
$4.031
$3.748
Corohmni
$4.047
IDEA Electronic Components Group
$4.334
$4.117
Continental Prestige Electronics
$6.370
$4.060
$3.370
DigiPath Technology Company
$6.761
$6.491
Aztec Data Supply Inc.
$8.330
Authorized Procurement Solutions
S.R.D Solutions
RC Electronics
Argo Parts USA
Lixinc
Futuretech Components
Bastille Electronics
Plastic/epoxy material provides durability and protection for the internal components of the peripheral driver, ensuring a longer lifespan.
Surface mount capability allows for easy and efficient installation on circuit boards, saving time and effort during assembly.
Supports a high maximum supply voltage, making it compatible with a wide range of power sources and applications.
Multiple functions in one device can help simplify circuit design and reduce component count, saving space and cost.
Built-in thermal and under voltage protections enhance the safety and reliability of the peripheral driver, protecting connected components from damage.
Multiple terminals provide flexibility for connecting to external devices and components, allowing for versatile and custom circuit configurations.
Automotive-grade temperature tolerance ensures reliable performance in harsh environmental conditions, making it suitable for automotive applications.
High nominal output peak current limit allows for driving high-power devices, making it suitable for applications requiring robust performance.
Half-bridge based interface IC type offers efficient control and management of peripheral devices, providing precise and reliable operation.
Peripheral Drivers ADUM4223BRWZ-RL attributes and parameters. Explore more Peripheral Drivers devices from Analog Devices
Additional Features:
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
ADUM4223BRWZ-RL Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - iCoupler Devices MSL Rating Change 06/Nov/2013 ADUM422 10/Sep/2017
PCN Assembly/Origin - Alt Assembly Site Rev/Add 15/Dec/2015
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
EU2B-YS3303C
Idec
ROTARY SWITCH;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Semiconductor
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
BTS5215L
Infineon Technologies
BTS5215L by Infineon is a MOS technology peripheral driver with 2 functions, operating at 5.5-40V, ideal for automotive applications. It offers built-in protections against transient, over/under voltage & current, thermal issues. With a max output current of 4.7A and turn-on/off time of 250/270us, it's suitable for various automotive electronic systems.
IRS21531DSPBF
IRS21531DSPBF by Infineon is a CMOS half bridge peripheral driver with 8 terminals. It operates b/w -40 to 125 °C and has built-in under voltage protection. With a supply voltage range of 10.1V to 15.4V, it is ideal for automotive applications requiring source and sink output current flow direction.
ULN-2803LW
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR;
VNQ7003SYTR
STMicroelectronics
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
IRS2113STRPBF
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
TPS4H160BQPWPRQ1
Texas Instruments
TPS4H160BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It features built-in protections for transient, over current, thermal, and under voltage scenarios. Ideal for automotive applications due to its AEC-Q100 screening level and high side driver capability.
BTS500851TMAATMA1
BTS500851TMAATMA1 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It has a max supply voltage of 58V and nominal output peak current limit of 11.1A. This small outline heat sink package is ideal for applications requiring a buffer or inverter based peripheral driver with sink output flow direction.
VN808CM-E
VN808CM-E by STMicroelectronics is a peripheral driver with 8 functions, operating at 10.5-32V, and offering built-in protections against various faults. With a max output current of 0.7A, it is suitable for automotive applications requiring a reliable buffer or inverter-based interface IC type. This compact driver has a small outline package style and can withstand temperatures ranging from -40 to 125°C.
BTS4880R
BTS4880R by Infineon is a peripheral driver with 8 functions, AEC-Q100 screening level, and built-in protections. It operates at supply voltages of 11-45V, with output peak current limit of 1.4A. Ideal for automotive applications requiring high reliability and protection against transient, over/under voltage, thermal issues.
TPS2H000BQPWPRQ1
TPS2H000BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 2 functions, operating at -40 to 125 °C. It has built-in protections for transient, over current, thermal & under voltage. Ideal for automotive applications due to AEC-Q100 screening & high side driver feature.
DS2482S-800+
Analog Devices
DS2482S-800+ by Analog Devices is a peripheral driver with 8 functions, operating at 2.9V to 5.5V. It has a small outline package style and industrial temperature grade suitable for buffer or inverter-based applications in various electronic devices.
AUIPS7111STRL
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG;
VN920DB5TR-E
STMicroelectronics' VN920DB5TR-E is a peripheral driver with 36V max supply voltage, 10A max output current, and built-in protections. It is used for buffer or inverter-based applications requiring transient, over current, over voltage, thermal, under voltage protection. The small outline package style makes it suitable for compact designs with limited space constraints.
TBD62083AFNG(Z)
Toshiba
Toshiba TBD62083AFNG(Z) is an 8-bit BCDMOS peripheral driver with a max output current of 0.4A. It operates b/w -40 to 85°C, suitable for industrial applications. The driver features built-in transient protection and can sink current flow up to 25V, making it ideal for various electronic systems.
IRS2011STRPBF
IRS2011STRPBF by Infineon is a Peripheral Driver with 8 terminals, operating voltage range of 10-20V. It offers built-in transient and under voltage protections, suitable for automotive applications. This CMOS technology-based driver has a turn-on/off time of 0.08us and can sink output current.
MIC2544A-1YM
Micrel
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
L298N
L298N by STMicroelectronics is a full bridge based peripheral driver with 2 functions and over current protection. It operates at a nominal voltage of 5V to 42V, with output polarity as true and source/sink current flow direction. This rectangular package is commonly used in applications requiring high power motor control.
VNH5050ATR-E
VNH5050ATR-E by STMicroelectronics is a peripheral driver with 36 terminals, operating voltage range of 5.5-18 V. It offers built-in protections against transient, over current, over voltage, thermal and under voltage conditions. Ideal for applications requiring a half bridge based peripheral driver with sink output current flow direction.
BTS3408GXUMA2
BTS3408GXUMA2 by Infineon is a peripheral driver with 60V max supply voltage, AEC-Q100 screening, and built-in protections for transient, over current, over voltage & thermal. It's used in automotive applications due to its BCD technology, Schmitt trigger input characteristics & sink output current flow direction.
BTS6143DAUMA1
BTS6143DAUMA1 by Infineon: MOS tech, 38V max supply, 8A peak current limit. Applicable for buffer/inverter-based peripheral driver interface ICs. Features built-in protections against transient, over/under voltage & current, thermal issues.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADUM5230ARWZ
ADUM5230ARWZ by Analog Devices is a CMOS peripheral driver with 16 terminals. It operates b/w -40 to 105 °C and has built-in under voltage protection. With a max supply voltage of 5.5 V, it is ideal for industrial applications requiring true output polarity and Schmitt trigger input characteristics.
ADUM7234BRZ
ADUM7234BRZ by Analog Devices is a half bridge based peripheral driver with 16 terminals. It operates b/w -40 to 105 °C and supports a max supply voltage of 18 V. With turn-on/off time of 0.2 us, it's ideal for industrial applications requiring source/sink output current flow control.
ADUM3223BRZ-RL7
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
ADUM3223BRZ
ADUM3223BRZ by Analog Devices is a peripheral driver with 2 functions, operating voltage range of 3-5.5V, and built-in thermal and under voltage protections. Ideal for automotive applications due to its small outline package style and gull wing terminal form.
ADUM4223ARWZ
ADUM5230ARWZ-RL
ADUM5230ARWZ-RL by Analog Devices is a 16-terminal peripheral driver with a max supply voltage of 5.5V and built-in under voltage protection. It operates in industrial temperature range (-40 to 105°C) and features Schmitt trigger input characteristics, making it ideal for half bridge based applications requiring fast turn-on/off times (0.1 us).
ADUM4223ARWZ-RL
ADUM4223BRWZ
ADUM7223ACCZ
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: BUTT; No. of Terminals: 13; Package Code: VFLGA; Package Shape: SQUARE;
ADUM7223BCCZ
ADUM7223CCCZ
ADUM3223ARZ
ADUM3223ARZ-RL7
ADUM3223ARZ-RL7 by Analog Devices is a peripheral driver with 2 functions, operating voltage range of 3V to 5.5V, and built-in thermal and under voltage protections. It is designed for automotive applications requiring a small outline package style and can handle a nominal output peak current limit of 4A.
ADUM3223CRZ
ADUM3223CRZ by Analog Devices is a peripheral driver with 2 functions, operating voltage range of 3-5.5V, and built-in thermal and under voltage protections. It is used in automotive applications due to its small outline package style, Gull Wing terminal form, and high output peak current limit of 4A.
ADUM3223CRZ-RL7
ADUM3223CRZ-RL7 by Analog Devices is a half bridge peripheral driver with 2 functions, 16 terminals, and built-in thermal and under voltage protections. It operates b/w -40 to 125 °C with a supply voltage range of 3V to 5.5V. Ideal for automotive applications due to its small outline package style and gull wing terminal form.
ADUM4223CRWZ-RL
ADUM3223WBRZ-RL7
ADUM3223WCRZ
ADUM3220WARZ-RL7
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved