Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADM7150ACPZ-3.3-R2 by Analog Devices is a Fixed Positive Single Output LDO Regulator with 3.3V nominal output voltage, 0.8A max output current, and 2% max voltage tolerance. It is ideal for applications requiring stable power supply in compact spaces with operating temperatures ranging from -40 to 125°C.
Median Price
$10.571
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Newark
1+ parts
$10.490
100+ parts
$7.100
1k+ parts
-
10k+ parts
Arrow
$10.652
$7.637
$5.946
Farnell
$11.017
$8.240
$6.389
Verical
Nova Conductors
$7.747
Digiode
$10.119
Chip Stock
VNN
Vyrian
Netsource Technology, Inc.
Corohmni
$3.038
Modulus Dynamics
$3.305
Parana Technologies
$5.901
$5.488
IDEA Electronic Components Group
$6.345
$6.028
Ampacity Inc.
$6.490
Aztec Data Supply Inc.
Advanced Electronics
$7.319
Netroflash
$7.359
$7.204
Vigor
$9.180
Continental Prestige Electronics
$9.530
$7.130
$6.080
Corphita
$9.587
DigiPath Technology Company
$9.898
$9.502
Component Stockers USA
$7.840
$6.150
Semicontronic
$14.130
$13.777
$13.706
Microchip USA
$22.710
$22.380
$22.220
$22.060
Lixinc
QUARKTWIN TECHNOLOGY LTD
Futuretech Components
Speed Components Ltd (Excess)
Argo Parts USA
PLASTIC/EPOXY - Provides durability and protection for the internal components, making it a reliable choice.
YES - Allows for easy installation on circuit boards, saving time and effort during assembly.
125 °C - Ensures stable performance even in high-temperature environments, increasing reliability.
SQUARE - Offers a compact design that saves space on the circuit board, ideal for tight layouts.
NO LEAD - Improves electrical performance and reduces the risk of solder joint failure, enhancing overall product longevity.
40 °C - Ensures functionality in cold environments, making it suitable for a wide range of applications.
3.234 V - Provides a consistent and precise output voltage, guaranteeing stable operation of connected devices.
2 \%- Ensures accuracy in voltage regulation, making it suitable for applications requiring precise power supply.
3.3 V - Offers a standard output voltage commonly used in many electronic devices, ensuring compatibility.
8 - Provides multiple connection points for versatile use in various circuit configurations.
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE - Offers efficient heat dissipation and a compact form factor, suitable for space-constrained applications.
0.5 mm - Facilitates precise connection with other components on the circuit board, ensuring reliable signal transmission.
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR - Provides stable voltage output with low dropout, ideal for sensitive electronic components.
MATTE TIN - Ensures good electrical conductivity and corrosion resistance, prolonging the product's lifespan.
DUAL - Allows for flexible installation options, accommodating different circuit layouts.
3.366 V - Provides a slightly higher voltage output option, suitable for applications requiring a slightly elevated voltage level.
3 - Indicates the level of protection against moisture, ensuring reliable performance under varying environmental conditions.
0.85 mm - Offers a low-profile design, making it suitable for applications with height restrictions.
3 mm - Provides a compact form factor, ideal for space-constrained designs.
0.026367 \% - Ensures stable output voltage under varying load conditions, guaranteeing consistent performance.
4.5 V - Allows for operation with low input voltages, making it compatible with a wide range of power sources.
0.8 A - Provides high output current capability, suitable for powering multiple components simultaneously.
30 - Indicates the duration the product can withstand reflow soldering, facilitating easy manufacturing processes.
260 - Specifies the maximum temperature the product can withstand during soldering, ensuring reliable solder joints.
1.2 V - Indicates the voltage drop across the regulator, allowing for compatibility with various input voltages.
3 mm - Offers a compact and symmetrical design, suitable for space-constrained applications.
16 V - Allows for operation with high input voltages, providing flexibility in power source selection.
Fixed Regulators - Positive Single Output LDO ADM7150ACPZ-3.3-R2 attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Analog Devices
Nominal Dropout Voltage-1:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
ADM7150ACPZ-3.3-R2 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1554216002
Molex
WIRE AND CABLE;
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Sangdest Microelectronics (Nanjing)
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
SPX3819M5-L-5.0/TR
Maxlinear
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1 %; Package Style (Meter): SMALL OUTLINE, LOW PROFILE, SHRINK PITCH;
TPS71533DCKR
Texas Instruments
TPS71533DCKR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 50mA. It features a small outline, thin profile package style and operates within an extended temperature range from -40°C to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LM1117DT-3.3
LM1117DT-3.3 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A, suitable for applications requiring stable voltage regulation in compact spaces. It features a small outline package style, Gull Wing terminal form, and operates within an extended temperature range from 0 to 125°C, making it ideal for various electronic devices where space and efficiency are crucial factors.
MIC29302AWU
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3;
LM1117MP-1.8/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
LM1084IS-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 25 V; Maximum Voltage Tolerance: 2 %;
LM1117IMPX-3.3
LM1117IMPX-3.3 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It has a small outline package style, operates b/w -40 to 125°C, and offers excellent line and load regulation for various applications requiring stable voltage supply in compact designs.
TPS76333DBVT
TPS76333DBVT by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It has a small outline, low profile package style and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LT3010EMS8E-5
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 80 V; Maximum Voltage Tolerance: 3 %;
AP2210K-3.3TRG1
Diodes Incorporated
Diodes Inc. AP2210K-3.3TRG1 is a 3.3V fixed positive single output LDO regulator with max dropout voltage of 0.5V and max output current of 0.3A, suitable for applications requiring stable voltage supply in compact spaces like consumer electronics and IoT devices.
XC6220B331MR-G
Torex Semiconductor
XC6220B331MR-G by Torex Semiconductor is a 3.3V fixed positive single output LDO regulator with a max output current of 1A. Operating at an input voltage range of 1.6-6V, it features a low dropout voltage of 0.06V and load regulation of 0.045%. Ideal for applications requiring stable voltage supply in compact spaces due to its small outline package style and surface mount capability.
PTPS7A2533DRVR
The Texas Instruments PTPS7A2533DRVR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It has a small outline package style, suitable for surface mount applications, and operates within an extended temperature range from -40°C to 125°C. Ideal for compact electronic devices requiring stable power supply with minimal dropout voltage.
LT1086CM-3.3#TRPBF
Analog Devices
Analog Devices' LT1086CM-3.3#TRPBF is a fixed positive single output LDO regulator with 1.5A max output current, 3.3V nominal output voltage, and 1.5V dropout voltage. Ideal for applications requiring stable voltage regulation in a compact package, such as consumer electronics or industrial control systems.
LM2940IMP-5.0
LM2940IMP-5.0 by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount designs where space is limited.
LT1129IST-5#TRPBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 3 %;
LT3010EMS8E-5#TR
Analog Devices' LT3010EMS8E-5#TR is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.55V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style includes a small outline, heat sink/slug, thin profile, and shrink pitch design for efficient surface mounting.
LT1764EQ-3.3#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.5 %;
NCP1117ST15T3G
Onsemi
NCP1117ST15T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 1.5V nominal output voltage, and 2% max voltage tolerance. It is used in applications requiring stable voltage regulation in a compact small outline package for temperatures ranging from -55 to 150°C.
LP2985-50DBVT
LP2985-50DBVT by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.15A max output current. It has a small outline package style, suitable for surface mount applications in various electronic devices requiring stable voltage regulation with low dropout voltage. Operating temperature range from -40 to 125°C makes it versatile for different environments.
MCP1825S-3302E/DB
Microchip Technology
MCP1825S-3302E/DB by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.5A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
SPX1117M3-L-3-3/TR
Exar
Exar's SPX1117M3-L-3-3/TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.8A max output current, and 1.1V nominal dropout voltage. Ideal for applications requiring stable power supply in compact spaces due to its small outline package style and low seated height of 1.8mm.
ADM7172ACPZ-3.0-R7
ADM7172ACPZ-3.0-R7 by Analog Devices is a Fixed Positive Single Output LDO Regulator with 3V Nominal Output Voltage, 2A Max Output Current, and 0.27V Max Dropout Voltage. Ideal for applications requiring stable voltage regulation in compact spaces due to its small form factor and low dropout voltage.
ADM7172ACPZ-3.3-R7
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 7 V; Maximum Voltage Tolerance: 1.5 %;
ADM7172ACPZ-5.0-R7
ADM7172ACPZ-5.0-R7 by Analog Devices is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 2A Max Output Current, and 0.27V Max Dropout Voltage. Ideal for applications requiring stable voltage regulation in compact spaces due to its small package size and low dropout voltage.
ADM7172ACPZ-1.8-R7
ADM7172ACPZ-1.8-R7 by Analog Devices is a CMOS LDO regulator with fixed 1.8V output voltage and 2A max current. Operating from -40 to 125°C, it's ideal for applications requiring stable power supply in compact spaces due to its small form factor and surface-mount capability.
ADM7172ACPZ-2.5-R7
ADM7172ACPZ-2.5-R7 by Analog Devices is a Fixed Positive Single Output LDO Regulator with 2A max output current, 2.5V nominal output voltage, and 1.5% max voltage tolerance. Ideal for applications requiring stable power supply in compact spaces due to its very thin profile chip carrier package style.
ADM7172ACPZ-4.2-R7
ADM7172ACPZ-4.2-R7 by Analog Devices is a Fixed Positive Single Output LDO Regulator with 4.2V Nominal Output Voltage, 2A Max Output Current, and 0.027V Max Dropout Voltage. Ideal for applications requiring stable voltage regulation in compact spaces due to its small form factor and high output current capability.
ADM7172ACPZ-1.3-R7
ADM7150ARDZ-5.0-R7
ADM7150ARDZ-5.0-R7 by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 1V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
ADM7150ACPZ-5.0-R7
ADM7150ACPZ-5.0-R7 by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.8A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. Its small outline package with very thin profile and surface mount capability enhances versatility in electronic designs.
ADM7150ARDZ-5.0
ADM7150ARDZ-5.0 by Analog Devices is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.8A max output current, and 1V max dropout voltage. It is ideal for applications requiring stable power supply in compact spaces with operating temperatures ranging from -40 to 125°C.
ADM7150ACPZ-3.3-R7
ADM7150ACPZ-3.3-R7 by Analog Devices is a fixed positive single output LDO regulator with an output voltage of 3.3V and max current of 0.8A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
ADM7150ARDZ-3.3
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Operating Temperature (TJ-Min): -40 Cel;
ADM7170ACPZ-3.3-R7
ADM7170ACPZ-3.3-R7 by Analog Devices is a CMOS LDO regulator with 3.3V output voltage, 0.5A max current, and 1.2% voltage tolerance. Ideal for applications requiring fixed positive single output regulators in compact spaces due to its small outline package style and low dropout voltage of 0.5V.
ADM7150ACPZ-5.0-R2
ADM7150ACPZ-5.0-R2 by Analog Devices is a fixed positive single output LDO regulator with a 5V nominal output voltage and 0.8A max output current. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in electronics requiring stable voltage regulation in a compact package.
ADM7150ARDZ-3.3-R7
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Minimum Output Voltage-1: 3.234 V;
ADM7150ARDZ-3.0
ADM7150ARDZ-3.0 by Analog Devices is a fixed positive single output LDO regulator with 2% voltage tolerance, operating from -40 to 125°C. It offers a max output current of 0.8A and a min input voltage of 4.5V, making it ideal for applications requiring stable power supply in compact designs.
ADM7170ACPZ-5.0-R7
ADM7170ACPZ-5.0-R7 by Analog Devices is a fixed positive single output LDO regulator with an operating temperature range of -40 to 125°C. It has a max output current of 0.5A and a nominal output voltage of 5V. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.
ADM7171ACPZ-3.3-R7
ADM7171ACPZ-5.0-R7
ADM7171ACPZ-5.0-R7 by Analog Devices is a CMOS LDO regulator with 5V output voltage, 1A max current, and 1.5% voltage tolerance. Ideal for applications requiring fixed positive single output regulators in compact spaces due to its small outline package style and low load regulation of 0.02%.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved