Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADM708TARZ-REEL by Analog Devices is a Power Management IC with 3.3/5V power supplies, -40 to 85°C operating temp, and +3.08V threshold voltage. Ideal for industrial applications, it features a small outline package with dual terminals and matte tin finish for surface mount assembly.
Median Price
$2.116
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Arrow
1+ parts
$1.680
100+ parts
$1.651
1k+ parts
-
10k+ parts
Chip1Stop
$1.510
$1.409
Mouser Electronics
$3.120
$1.930
$1.810
$1.650
DigiKey
$3.210
$1.986
$1.851
$1.675
Analog Devices Inc
$4.020
$1.791
$1.349
$1.313
Verical
Rochester
$1.350
$1.270
Digiode
$1.387
Nova Conductors
$1.500
Chip Stock
Cyclops Electronics Ltd
ComSIT Distribution GmbH
ComSIT USA
Vyrian
North Shore Components
VNN
Ampacity Inc.
$1.200
Corphita
$1.314
Aranea Global
$1.470
$1.411
Continental Prestige Electronics
Argo Parts USA
Vigor
$2.500
Aztec Data Supply Inc.
$10.210
Corohmni
$11.832
Parana Technologies
$14.514
$13.498
IDEA Electronic Components Group
$15.606
$14.826
DigiPath Technology Company
$24.345
$23.372
Perfect Parts
RC Electronics
Assy Fe
Lixinc
Authorized Procurement Solutions
iodParts Technologies Inc.
A-Z Elektronik GmbH
ChipstoGo Electronic ltd
Kepictronics
Speed Components Ltd (Excess)
Plastic/Epoxy material provides durability and reliability for the product.
Surface mount capability allows for easy and efficient installation on circuit boards.
Supports multiple power supply voltages, providing flexibility in various applications.
Having 8 terminals allows for multiple connection points for power and control signals.
With a high maximum operating temperature, the product can function reliably in harsh environments.
Can operate effectively in extreme cold conditions, increasing the product's versatility.
Matte Tin finish provides good solderability and conductivity for the terminals.
Accurate threshold voltage ensures precise power management for connected devices.
Low supply current consumption helps in energy efficiency and reduces power wastage.
Power Management ICs ADM708TARZ-REEL attributes and parameters. Explore more Power Management ICs devices from Analog Devices
Additional Features:
Adjustable Threshold:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Nominal Threshold Voltage (V):
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
ADM708TARZ-REEL Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
Rectron
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
Shenzhen Socay Electronics
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
ULN2803A
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Crimson Semiconductor
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
UCD90320ZWSR
Texas Instruments
UCD90320ZWSR by Texas Instruments is a Power Management IC with 169 terminals, operating at -40 to 85°C. It has a supply voltage range of 3.15-3.63V and max current of 54.9mA, suitable for industrial applications requiring precise power supply management in compact spaces.
LTC4364HDE-2#PBF
Linear Technology
POWER SUPPLY SUPPORT CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
SI3402-B-GMR
Silicon Labs
SI3402-B-GMR by Silicon Labs is a Power Management IC with 20 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, suitable for industrial applications. Features include adjustable threshold voltage, support circuitry for power supply, and compact dimensions of 5x5mm.
BQ24650RVAR
BQ24650RVAR by Texas Instruments is a Power Management IC with 16 terminals, operating b/w -40 to 85°C. It supports supply voltages from 5V to 28V and has a buck switcher configuration. Ideal for industrial applications requiring power supply support circuits in compact spaces.
MIC2775-29YM5-TR
MIC2775-29YM5-TR by Microchip Technology is a Power Management IC with 3.3988V Nominal Voltage, suitable for industrial applications. It features a small outline package with dual terminals and operates b/w -40 to 85°C. With a min supply voltage of 1.5V and max of 5.5V, it supports power supply circuits in compact designs.
MCP39F511-E/MQ
MCP39F511-E/MQ by Microchip Technology is a Power Management IC with 28 terminals, operating at -40 to 125 °C. It supports 2 channels, with power supplies of 3/3.3V and terminal finish in matte tin. Ideal for automotive applications due to TS16949 screening level and adjustable threshold feature.
LTC4011CFE#PBF
Analog Devices
LTC4011CFE#PBF by Analog Devices is a Power Management IC with 20 terminals, operating temperature range of 0-70°C, and supply voltage from 4.5V to 34V. It is used in power supply support circuits due to its small outline package and adjustable threshold feature.
LT1641-2IS8#PBF
LT1641-2IS8#PBF by Analog Devices is a Power Management IC with 24V Vsup, -40 to 85°C operating temp range, and 80V max Vsup. It's used in industrial applications for power supply support circuits due to its adjustable threshold feature and small outline package style.
ISPPAC-POWR1014A-01TN48I
Lattice Semiconductor
ISPPAC-POWR1014A-01TN48I by Lattice Semiconductor is a Power Management IC with 48 terminals and 10 channels. It operates at a nominal voltage of 3.3V, supports power supplies of 2.5/5,3/3.3V, and has an adjustable threshold feature. This IC is ideal for industrial applications requiring precise power management in compact spaces.
UC3906DW
Unitrode
POWER SUPPLY SUPPORT CIRCUIT; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BTS500551TMCATMA1
Infineon Technologies
BTS500551TMCATMA1 by Infineon is a Power Management IC with AEC-Q100 screening. It operates b/w -40 to 150°C, supports supply voltages from 5V to 34V, and has adjustable threshold. Widely used in automotive applications due to its small outline package and gull wing terminals.
TUSB4020BIPHPQ1
TUSB4020BIPHPQ1 by Texas Instruments is a Power Management IC with 48 terminals, operating b/w -40 to 85°C. It supports a supply voltage range of 0.99V to 1.26V and features adjustable threshold levels. Ideal for industrial applications requiring power supply support circuits in compact spaces.
LTC4416EMS#PBF
LTC4416EMS#PBF by Analog Devices is a Power Management IC with 1 function, operating at 0-85°C. It supports supply voltages from 3.6V to 36V and comes in a small outline package for power supply applications.
LTC6813ILWE-1#3ZZPBF
POWER SUPPLY MANAGEMENT CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: HLFQFP; Package Shape: SQUARE; Surface Mount: YES;
TUSB4041IPAPRQ1
TUSB4041IPAPRQ1 by Texas Instruments is a Power Management IC with 64 terminals, operating at -40 to 85°C. It has a supply voltage range of 0.99V to 1.26V and is suitable for industrial applications requiring power supply support circuits in a compact square package.
MCP130T-300I/TT
MCP130T-300I/TT by Microchip Technology is a Power Management IC with 3 terminals, operating voltage range of 1-5.5V, and industrial temperature grade. It is a surface-mount device in a small outline package suitable for power supply support circuits in various applications.
MAX803TEXR+T
MAX803TEXR+T by Analog Devices is a Power Management IC with 3.3V nominal voltage, -40 to 125 °C operating temperature range, and 1.1mm max seated height. It is ideal for automotive applications requiring a compact, surface-mountable solution for power supply support circuits.
INA233AIDGSR
INA233AIDGSR by Texas Instruments is a Power Management IC with 10 terminals, operating b/w -40 to 125 °C. It has a supply voltage range of 2.7V to 5.5V and features adjustable threshold voltage for automotive applications in small outline square package.
MMPF0100F9ANES
NXP Semiconductors
MMPF0100F9ANES by NXP Semiconductors is a Power Management IC with 56 terminals, operating b/w -40 to 105°C. It supports 14 channels, MOS technology, and has a supply voltage range of 2.8V to 4.5V. Ideal for industrial applications requiring precise power supply support in compact spaces.
MIC2019A-1YM6-TR
Micrel
POWER SUPPLY SUPPORT CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
SP708TEN-L/TR
Exar
ADM705ARZ-REEL
ADM705ARZ-REEL by Analog Devices is a Power Management IC with 5V supply voltage, 8 terminals, and industrial temperature grade. It is used in power supply management circuits, featuring a small outline package shape for surface mount applications. Operating b/w -40 to 85°C, it has a max seated height of 1.75mm.
ADM705ARZ-REEL7
ADM705ARZ-REEL7 by Analog Devices is a Power Management IC with 8 terminals, operating b/w -40 to 85°C. It has a nominal voltage of 5V and max seated height of 1.75mm. Widely used in industrial applications for power supply management circuits due to its small outline package style and surface mount capability.
ADM705ARZ
ADM705ARZ by Analog Devices is a Power Management IC with 8 terminals, operating at -40 to 85°C. It has a nominal voltage of 5V and peak reflow temperature of 260°C. Widely used in industrial applications for power supply management circuits.
ADM708SARZ
POWER SUPPLY SUPPORT CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADM708SARZ-REEL
ADM708SARZ-REEL by Analog Devices is a Power Management IC with 5V supply voltage, 8 terminals, and -40 to 85°C operating temperature range. It is used in industrial applications for power supply support circuits due to its CMOS technology and small outline package design.
ADM706SARZ-REEL
ADM706SARZ-REEL by Analog Devices is a Power Management IC with 3.3V Nominal Voltage, 5V Power Supplies, and -40 to 85°C Operating Temperature range. It is used in industrial applications for power supply management circuits due to its small outline package style and dual terminal position.
ADM708ARZ-REEL
ADM708ARZ-REEL by Analog Devices is a Power Management IC with 8 terminals, operating b/w -40 to 85°C. It has a nominal voltage of 5V and supports power supplies up to 5V. This small outline package IC is ideal for industrial applications requiring power supply support circuits.
ADM706TARZ
POWER SUPPLY MANAGEMENT CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADM708TARZ
ADM706TARZ-REEL
ADM706TARZ-REEL by Analog Devices is a Power Management IC with 3.3/5V supplies, 8 terminals, and +3.08V nominal threshold voltage. It is used in industrial applications for power supply management circuits, operating b/w -40 to 85°C with a max seated height of 1.75mm.
ADM708TARZ-REEL+
ADM706ARZ
ADM706ARZ-REEL
ADM706ARZ-REEL by Analog Devices is a Power Management IC with 8 terminals, operating at -40 to 85°C. It has a nominal voltage of 5V and max seated height of 1.75mm. Widely used in industrial applications for power supply management circuits due to its small outline package and surface mount capability.
ADM706ARZ-REEL7
ADM706ARZ-REEL7 by Analog Devices is a Power Management IC with 5V supply voltage, 8 terminals, and -40 to 85°C operating temperature range. It is used in industrial applications for power supply management circuits due to its small outline package and surface mount capability.
ADM708TAR
ADM705AR-REEL7
ADM705AR-REEL7 by Analog Devices is a Power Management IC with 5V supply voltage, 8 terminals, and industrial temperature grade. It is a surface-mount device in a small outline package suitable for power supply management circuits. Operating b/w -40 to 85°C, it has a max seated height of 1.75mm and peak reflow temperature of 240°C.
ADM708ARZ
ADM706RARZ-REEL
ADM706SARZ
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved