Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Analog Devices ADG452BN is a 4-function CMOS multiplexer with 16 terminals and a package style of IN-LINE. It operates at temperatures ranging from -40 to 85 °C, with a max on-state resistance of 12 ohm and switching time of 220 ns. Ideal for industrial applications requiring high isolation levels and precise signal routing within a compact form factor.
Median Price
$3.940
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$3.530
10k+ parts
$3.320
Freelance Electronics
$3.661
Nova Conductors
$3.910
Digiode
$4.170
Vyrian
VNN
Bristol Electronics
Holdelec - ElecDif-Pro
Ampacity Inc.
$3.730
Argo Parts USA
Continental Prestige Electronics
$3.832
Netroflash
Corphita
$3.951
Aztec Data Supply Inc.
$7.405
Corohmni
$9.615
Parana Technologies
$15.246
$14.179
IDEA Electronic Components Group
$16.394
$15.574
AZTECH Wire
$21.440
DigiPath Technology Company
$25.575
$24.552
Microchip USA
Durable and lightweight material for the package housing, ensuring longevity and ease of handling.
Provides versatility and flexibility in routing signals or data across multiple channels.
Compatible with common voltage standards, making it suitable for a wide range of applications.
Capable of operating at high temperatures, suitable for industrial environments where heat may be a factor.
Utilizes CMOS technology for efficient power consumption and fast switching speeds.
Multiplexers & Switches ADG452BN attributes and parameters. Explore more Multiplexers & Switches devices from Analog Devices
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Negative Supply Voltage (Vsup):
Minimum Negative Supply Voltage (Vsup):
Nominal Negative Supply Voltage (Vsup):
Normal Position (V):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
ADG452BN Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices Family 27/Oct/2011
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
Continental Device India
Hy Electronic
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NXP Semiconductors
Zetex Plc
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
TS5A23157RSER
Texas Instruments
TS5A23157RSER by Texas Instruments is a 2-channel SPDT multiplexer/switch with a package style of CHIP CARRIER. It operates at a nominal voltage of 1.8V and has a max on-state resistance of 140 ohm. This switch is commonly used in industrial applications requiring high isolation and low resistance switching.
ADG1408YRUZ-REEL7
Analog Devices
ADG1408YRUZ-REEL7 by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 4.5V to 5.5V and offers a max on-state resistance of 9 ohm. With automotive temperature grade, it is suitable for applications requiring high-speed switching in compact designs.
DG408DY
Intersil
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LVC1G66DRYR
SN74LVC1G66DRYR by Texas Instruments is a SPDT switch with 6 terminals, operating at a voltage range of 1.65V to 5.5V. It offers a max on-state resistance of 120 ohm and fast switching times of 12ns turn-on and 10ns turn-off. Ideal for industrial applications requiring low power consumption and high bandwidth up to 300kHz in a compact SOT package.
ADG1606BRUZ-REEL7
ADG1606BRUZ-REEL7 by Analog Devices is a 16-channel CMOS multiplexer with 5V supply voltage, -40 to 125 °C operating temperature range. It features a max on-state resistance of 7.5 ohm and common output. Ideal for automotive applications due to its small outline package and high isolation of 62 dB.
ADG719BRTZ-R2
ADG719BRTZ-R2 by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 12 ohm and nominal off-state isolation of 67 dB. Ideal for automotive applications due to its low profile design and CMOS technology.
CD74HC4067M96
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TS5A23157DGSR
TS5A23157DGSR by Texas Instruments is a 2-channel SPDT switch with 140 ohm Ron, 220 kHz bandwidth, and 60 dB isolation. Ideal for industrial applications requiring separate outputs and dual terminals in a compact thin profile package. Operating from -40 to 85°C with low supply current of 0.01 mA.
DG411DYZ-T
Renesas Electronics
Renesas Electronics' DG411DYZ-T is a CMOS SPST switch with 4 functions, 35 ohm Ron, and 175 ns switch-on time. It operates in industrial temperatures from -40 to 85 °C and has a small outline package for applications requiring high isolation at nominal voltage of +/-15 V.
TC4066BP(N,F)
Toshiba
SPST;
DG212CJ
SPST; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MPC508AU/1K
The Texas Instruments MPC508AU/1K is a single-ended multiplexer with 8 channels. It operates at a nominal voltage of +-15V and has a max on-state resistance of 1500 ohm. This industrial-grade device, with its small outline package style, is commonly used in applications requiring signal switching and isolation.
DG412DY-E3
Vishay Intertechnology
DG412DY-E3 by Vishay Intertechnology is a CMOS SPST multiplexer with 4 functions, -40 to 85°C operating temp, and 35 ohm on-state resistance. It's used in industrial applications requiring separate outputs, with a max seated height of 1.75mm and switching time of 220ns for precise signal control.
CD4051BM96E4
Rochester Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LV4052ADBR
SN74LV4052ADBR by Texas Instruments is a CMOS differential multiplexer with 2 channels. It operates at a supply voltage range of 2-5.5V and offers a bandwidth of 50 kHz. With a compact rectangular package, it is ideal for industrial applications requiring high-speed signal switching.
NCP330MUTBG
NCP330MUTBG by Onsemi is a SPST multiplexer with 4 terminals, operating voltage range of 1.8V to 5.5V, and on-state resistance of 50 ohm. It is designed for industrial applications requiring a compact rectangular package with surface mount capability and dual terminal position.
MPC506AU
Burr-Brown Corporation
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1404YRUZ-REEL7
ADG1404YRUZ-REEL7 by Analog Devices is a CMOS multiplexer with 4 channels, 14 terminals, and on-state resistance of 4 ohm. It operates b/w -40 to 125 °C and has a peak reflow temp of 260 C. Ideal for automotive applications due to its small size (5x4.4 mm) and low supply current (0.28 mA).
ADG1411YRUZ-REEL7
ADG1411YRUZ-REEL7 by Analog Devices is a CMOS SPST switch with 4 functions, operating at -40 to 125°C. It has a max on-state resistance of 5.4 ohm and offers separate outputs. Ideal for automotive applications due to its small size, low power consumption, and high isolation of 80 dB.
TMUX7213PWR
TMUX7213PWR by Texas Instruments is a 4-channel CMOS multiplexer with a max supply voltage of 22V. It has a nominal bandwidth of 48kHz and offers separate outputs. This automotive-grade device is suitable for applications requiring high-speed switching and low on-state resistance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADG419BRZ
ADG419BRZ by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm. It operates in industrial temperature range (-40 to 85 °C) and has a nominal voltage of +/-15 V. Ideal for applications requiring high off-state isolation (80 dB) and fast switching times (160 ns).
ADG419BRMZ
ADG419BRMZ by Analog Devices is a CMOS SPDT switch with 8 terminals and a max on-state resistance of 35 ohm. It operates at temperatures ranging from -40 to 85 °C and has a nominal voltage of +-15 V. This industrial-grade switch is ideal for applications requiring precise signal routing in compact electronic systems.
ADG419BRZ-REEL7
ADG419BRZ-REEL7 by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm. It operates at temperatures ranging from -40 to 85 °C and has a nominal voltage of +-15 V. Ideal for industrial applications requiring precise signal routing in compact spaces.
ADG419BRZ-REEL
ADG419BRZ-REEL by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm. It operates at industrial temperature grade, with a peak reflow temperature of 260°C. Ideal for applications requiring fast switching speeds and high off-state isolation up to 80 dB.
ADG419BRMZ-REEL7
ADG419BRMZ-REEL7 by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm. Operating at -40 to 85 °C, it has a peak reflow temperature of 260 C and offers 80 dB off-state isolation. Ideal for industrial applications requiring fast switching times and high reliability in compact designs.
ADG439FBRZ
DIFFERENTIAL MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG426BRSZ
ADG426BRSZ by Analog Devices is a 16-channel single-ended multiplexer with a max on-state resistance of 80 ohm. It operates in industrial temperature range (-40 to 85 °C) and has a switching time of 150 ns. Ideal for applications requiring high channel count and precise signal routing.
ADG408BRZ
ADG408BRZ by Analog Devices is an 8-channel single-ended multiplexer with a max on-state resistance of 100 ohm and switching voltage of +-15 V. It operates in industrial temperature range, making it suitable for applications requiring precise signal routing in harsh environments.
ADG419BRMZ-REEL
ADG419BRMZ-REEL by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm. It operates at temperatures ranging from -40 to 85 °C and has a peak reflow temperature of 260 C. Ideal for industrial applications requiring high isolation and fast switching times.
ADG438FBRZ
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG408BRUZ-REEL7
ADG408BRUZ-REEL7 by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It has a max on-state resistance of 100 ohm and operates at industrial temperature grade. Ideal for applications requiring high-speed switching with low power consumption in compact designs.
ADG408BRUZ
ADG408BRUZ by Analog Devices is an 8-channel CMOS multiplexer with a max on-state resistance of 100 ohm and switching voltage of +-15 V. It operates in industrial temperature range, has a dual terminal position, and is suitable for applications requiring high-speed signal switching.
ADG439FBRZ-REEL
ADG439FBRZ-REEL by Analog Devices is a CMOS differential multiplexer with 4 channels. It operates at -40 to 125 °C and has a max on-state resistance of 270 ohm. With a package size of 9.9mm x 3.9mm, it is ideal for automotive applications requiring precise signal switching.
ADG438FBRZ-REEL
ADG438FBRZ-REEL by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at temperatures from -40 to 125 °C and has a max on-state resistance of 270 ohm. With a small outline package style, it is ideal for automotive applications requiring high isolation and low supply current.
ADG451BRZ-REEL7
ADG451BRZ-REEL7 by Analog Devices is a 4-function CMOS SPST switch with 12 ohm Ron, ideal for industrial applications. It operates at -40 to 85 °C with Vsup ranging from ±4.5V to ±20V, offering fast switching times of 220ns on and 140ns off. The small outline package measures 9.9mm x 3.9mm, making it suitable for compact designs requiring high isolation (65dB).
ADG412BRZ-REEL7
ADG412BRZ-REEL7 by Analog Devices is a CMOS SPST multiplexer with 4 functions, 16 terminals, and 35 ohm on-state resistance. It operates in industrial temperature range (-40 to 85 °C) and has separate output at V=5,12/+-15. Ideal for applications requiring high-speed switching with minimal power consumption.
ADG426BRSZ-REEL
ADG426BRSZ-REEL by Analog Devices is a 16-channel single-ended multiplexer with a max on-state resistance of 80 ohm. It operates at industrial temperature grade (-40 to 85 °C) and has a small outline package style. Ideal for applications requiring high channel count and low on-state resistance in harsh environments.
ADG406BPZ
ADG406BPZ by Analog Devices is a 16-channel single-ended multiplexer with BICMOS technology. It operates at -40 to 85°C, with a max on-state resistance of 80 ohm and switching voltage of +-15V. Ideal for industrial applications requiring high channel count and precise signal routing in compact spaces.
ADG452BRZ-REEL7
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG408BRUZ-REEL
ADG408BRUZ-REEL by Analog Devices is an 8-channel single-ended multiplexer with a max on-state resistance of 100 ohm. It operates in industrial temperature grade range from -40 to 85 °C and has a supply current of 0.5 mA. Ideal for applications requiring high-speed switching and low on-state resistance in compact designs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved