Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADAS1126 by Analog Devices is a 24-bit ADC with 0.025% EL, 32 analog in channels, and 0.0197 MHz sample rate. It's used for high-precision data acquisition in automotive safety systems.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Northwest PG Solutions
$2.728
AZTECH Wire
$9.950
Parana Technologies
$15.905
$14.792
IDEA Electronic Components Group
$17.102
$16.247
DigiPath Technology Company
$26.679
$25.612
One Stop Electronics
$34.000
Corphita
Native Components
$2.406
The use of plastic/epoxy as the package body material makes this product durable and reliable for long-term use.
Having 32 analog input channels allows for versatile and complex signal processing, making this product suitable for a wide range of applications.
The surface mount feature enables easy and efficient integration of the converter onto circuit boards, reducing assembly time and costs.
The square package shape offers a compact and space-saving design, making it ideal for applications where size constraints are a concern.
With 24 bits of resolution, this converter provides high accuracy and precision in converting analog signals to digital, ensuring reliable performance.
The low linearity error percentage of 0.025% indicates the high degree of accuracy and consistency in the conversion process, leading to reliable and precise digital output.
The high sample rate of 0.0197MHz allows for fast and real-time conversion of analog signals to digital, making this product suitable for applications requiring high-speed data acquisition.
The terminal positioned at the bottom facilitates easy and secure connections, enhancing the ease of installation and maintenance of the converter.
The ball terminal form ensures reliable electrical connections and enhances the durability and longevity of the converter in various operating conditions.
The binary output bit code simplifies data processing and integration with digital systems, providing compatibility and ease of use in various applications.
The serial output format allows for efficient data transmission and communication between the converter and other digital devices, enhancing the overall system performance.
The sample and hold feature enables the accurate capturing and conversion of analog signals at precise moments, ensuring the fidelity and integrity of the digital output.
Analog-to-Digital Converters ADAS1126 attributes and parameters. Explore more Analog-to-Digital Converters devices from Analog Devices
Converter Type:
No. of Analog In Channels:
No. of Functions:
No. of Bits:
Output Bit Code:
Output Format:
Maximum Linearity Error (EL):
Sample Rate:
Hold Mode:
Terminal Position:
Terminal Form:
Surface Mount:
Package Body Material:
Package Shape:
JESD-30 Code:
ADAS1126 Converters trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
Formosa Microsemi
Lite-on Semiconductor
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
CRCW04020000Z0ED
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
ADS7884SDBVT
The Texas Instruments ADS7884SDBVT is a 10-bit ADC with 3 MHz sample rate, 0.0781% linearity error, and 5.5V max analog input voltage. Ideal for automotive applications, it operates b/w -40 to 125°C and has a small outline package with dual terminals for space-constrained designs.
MCP33131-10-E/MS
Microchip Technology
MCP33131-10-E/MS by Microchip: 16-bit ADC with 0.0091% EL, 1 MHz sample rate, and 0.75 us conversion time. Ideal for automotive applications due to AEC-Q100 screening, -40 to 125 °C operating temp range, and small outline package style.
ADS8509IDW
The Texas Instruments ADS8509IDW is a 16-bit ADC with 0.0046% EL, 5V supply, and 0.25 MHz sample rate. Ideal for industrial applications, it features a CMOS technology, BINARY output code, and SERIAL output format. With a compact rectangular package style and dual terminals, this ADC offers precise analog-to-digital conversion in a small footprint.
AD7193BRUZ-REEL
Analog Devices
AD7193BRUZ-REEL by Analog Devices is a 24-bit ADC with 4 analog in channels, operating at -40 to 105°C. It has a sample rate of 0.0048 MHz and supports binary and offset binary output codes. Ideal for industrial applications requiring precise analog-to-digital conversion in compact designs.
AD7686BRMZRL7
AD7686BRMZRL7 by Analog Devices is a 16-bit ADC with 0.0046% linearity error, 5V supply, and 0.5 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact square package. With a fast conversion time of 1.6 us, it offers reliable performance in temperature-sensitive environments.
ADS1271IPWG4
ADS1271IPWG4 by Texas Instruments is a 24-bit ADC with 0.0015% EL, operating at 105°C. It features a sample rate of 0.105 MHz and supports supply voltages of 1.8/3.3,5 V. Ideal for industrial applications requiring precise analog-to-digital conversion in compact designs with high temperature tolerance.
LTC1867IGN#WPBF
LTC1867IGN#WPBF by Analog Devices is a 16-bit ADC with 8 analog in channels, 0.0061% max linearity error, and 0.2 MHz sample rate. Ideal for industrial applications, it operates b/w -40 to 85°C, with a small outline package style and 3.5 us conversion time.
AD9280ARSZRL
AD9280ARSZRL by Analog Devices is an 8-bit ADC with a sample rate of 32 MHz and max analog input voltage of 5.5 V. It is used in industrial applications for converting analog signals to binary output in parallel format, suitable for temperature ranges from -40°C to 85°C.
ADS112C04IPW
Texas Instruments' ADS112C04IPW is a 16-bit ADC with 4 analog in channels, 0.0015% EL, and 0.002 MHz sample rate. Ideal for automotive applications due to its small size, low power consumption, and high accuracy. Operates b/w -40 to 125 °C with a supply voltage of 2.3-5.05 V.
AD7918BRUZ-REEL
AD7918BRUZ-REEL by Analog Devices is a 10-bit ADC with 8 analog input channels. It has a sample rate of 1 MHz and operates at temperatures ranging from -40 to 85 °C. This converter is commonly used in industrial applications requiring precise analog-to-digital conversion.
AD7928BRUZ-REEL7
Analog Devices' AD7928BRUZ-REEL7 is a 12-bit ADC with 8 analog in channels, 1 MHz sample rate, and 0.0244% max linearity error. Ideal for industrial applications requiring precise analog-to-digital conversion within a temperature range of -40 to 85°C.
2804
Dymec
The Dymec 2804 is an 8-bit A/D converter with 0.19% EL, operating at temperatures from 0 to 70°C. It has a max analog input voltage of 5V and supports binary, offset binary, and 2's complement binary output codes. Ideal for applications requiring precise analog-to-digital conversion in commercial-grade environments.
ADS1274IPAPT
The Texas Instruments ADS1274IPAPT is a 24-bit ADC with 4 analog in channels, 0.0012% EL, and 0.144 MHz sample rate. Ideal for automotive applications, it operates at -40 to 125 °C with a supply voltage of 1.65-5V. The converter type is delta-sigma with a serial output format.
MAX14002AAP+
MAX14002AAP+ by Analog Devices is a 10-bit ADC with 0.0977% EL, 0.01 MHz sample rate, and BICMOS technology. Ideal for automotive applications, it has a small outline package with 20 terminals and operates b/w -40 to 125 °C temperature range.
LTC1859CG
Linear Technology
ADC, PROPRIETARY METHOD; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
AD9240ASZRL
Analog Devices' AD9240ASZRL is a 14-bit ADC with 10 MHz sample rate, ideal for applications requiring high-speed data conversion. Operating at 5V, it offers binary output in parallel format. With a temperature range of -55 to 85°C, this CMOS technology converter is suitable for various industrial and communication systems.
ADS7841EB
Burr-Brown Corporation
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
LTC2174IUKG-14#PBF
LTC2174IUKG-14#PBF by Analog Devices is a 14-bit ADC with 4 analog input channels, 105 MHz sample rate, and 0.0198% max linearity error. It is used in industrial applications for high-speed data conversion. The package is surface mountable and has a temperature range of -40 to 85°C.
PCM1804DB
PCM1804DB by Texas Instruments is a 24-bit ADC with 2 analog in channels, operating at 0.192 MHz sample rate. It has a supply voltage of 5V and supports serial output format. Ideal for applications requiring precise analog-to-digital conversion in commercial temperature range.
AD7997BRUZ-1REEL
AD7997BRUZ-1REEL by Analog Devices is a 10-bit ADC with 8 analog input channels, 0.0488% linearity error, and 0-5.5V analog input voltage range. Ideal for industrial applications requiring high precision data conversion in a compact SOT package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADAS3022SCPZ-EP-RL
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;
ADAS3022SCPZ-EP
ADAS3022BCPZ-RL7
Analog Devices' ADAS3022BCPZ-RL7 is a 16-bit ADC with 8 analog in channels, 0.0076% EL, and 0.125 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact square package with 40 terminals. Operating from -40 to 85 °C, it offers fast 1 us conversion time and supports up to ±24 V input voltage range.
ADAS1124JBCZ
ADC, PROPRIETARY METHOD; Temperature Grade: COMMERCIAL; Terminal Form: BALL; No. of Terminals: 324; Package Code: FBGA; Package Shape: SQUARE;
ADAS1127
ADC, PROPRIETARY METHOD; Terminal Form: BALL; Package Code: BGA; Package Shape: SQUARE; Package Style (Meter): GRID ARRAY; Terminal Position: BOTTOM;
ADAS1128
ADC, PROPRIETARY METHOD; Terminal Form: BALL; Package Code: BGA; Package Shape: SQUARE; Surface Mount: YES; Terminal Position: BOTTOM;
ADAS1129JBCZ
ADC, PROPRIETARY METHOD; Output Bit Code: OFFSET BINARY; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
ADAS1129JBCZ-RL
ADC, PROPRIETARY METHOD; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Output Bit Code: OFFSET BINARY; Peak Reflow Temperature (C): NOT SPECIFIED;
ADAS3022BCPZ
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;
ADAS3022BSTZ
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 40; Package Code: LFQFP; Package Shape: SQUARE;
ADAS3022BSTZ-RL7
ADAS3023BCPZ
ADAS3023BCPZ-RL7
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved