Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AD633JRZ-RL by Analog Devices is an analog computational IC with 8 terminals, operating at a nominal voltage of +-15V. It functions as an analog multiplier or divider, with a bandwidth of 1 kHz and operates in commercial temperature grade. The package is small outline, surface mountable, and suitable for various applications requiring precise analog computations.
Median Price
$9.171
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$9.720
Digiode
$12.939
Chip Stock
Vyrian
VNN
Semicontronic
$7.800
$7.605
$7.566
Ampacity Inc.
Continental Prestige Electronics
$9.715
$9.521
Netroflash
$9.234
$9.040
Vigor
$11.630
Corphita
$12.258
Corohmni
$16.329
Advanced Electronics
$20.824
$20.616
$19.783
Parana Technologies
$22.100
$20.553
IDEA Electronic Components Group
$23.763
$22.575
Aztec Data Supply Inc.
$24.360
DigiPath Technology Company
$37.070
$35.587
Lixinc
Authorized Procurement Solutions
Argo Parts USA
This material is lightweight and durable, making the product suitable for a variety of applications while ensuring longevity.
This voltage is commonly used in many electronic circuits, making it compatible with a wide range of systems.
With a high maximum operating temperature, this product can withstand heat and operate efficiently even in challenging environments.
Bipolar technology offers high precision and accuracy in calculations, making this product reliable for analog computations.
This bandwidth allows for fast and efficient operation, making the product suitable for applications requiring real-time analog computation.
Analog Computational AD633JRZ-RL attributes and parameters. Explore more Analog Computational devices from Analog Devices
Other IC type:
Nominal Bandwidth:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Maximum Negative Supply Voltage (Vsup):
Minimum Negative Supply Voltage (Vsup):
Nominal Negative Supply Voltage (Vsup):
Maximum Negative Input Voltage:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Positive Input Voltage:
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
AD633JRZ-RL Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358N
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
Solid State Devices
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
Formosa Microsemi
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
AD641ANZ
Analog Devices
AD641ANZ by Analog Devices is an analog computational IC with 20 terminals, operating at -40 to 85 °C. It features a bandwidth of 250 kHz, suitable for log or antilog amplification applications. The package style is in-line, with dimensions of 25.2mm x 7.62mm x 5.33mm and terminal pitch of 2.54mm.
MAX4000EBL-T
Maxim Integrated
LOG OR ANTILOG AMPLIFIER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VFBGA; Package Shape: SQUARE; Surface Mount: YES;
MAX2015ETA+
MAX2015ETA+ by Analog Devices is an 8-terminal IC with a supply voltage range of 2.7V to 3.6V, suitable for industrial applications. It features a BICMOS technology, operates b/w -40 °C to 85°C, and has a max seated height of 0.8mm. This analog computational device comes in a small outline package shape with surface mount capability, making it ideal for log or antilog amplifier circuits.
SA572N
SA572N by Onsemi is an Analog Computational IC with 2 functions, operating at -40 to 85 °C. It has a supply voltage range of 6-22 V and terminal pitch of 2.54 mm. Widely used in industrial applications for companding tasks due to its bipolar technology and through-hole terminal form.
AD539SD/883B
AD539SD/883B by Analog Devices is a MIL-STD-883 Class B rated analog computational IC with 2 functions, operating at -55 to 125 °C. It features a supply voltage range of +-5V, bandwidth of 60 kHz, and is ideal for military-grade applications requiring high precision analog multiplication or division.
AD633JR-REEL
AD633JR-REEL by Analog Devices is an 8-terminal analog computational IC with a supply voltage range of ±15V. It operates in temperatures from 0 to 70°C, ideal for commercial applications. With a bandwidth of 1 kHz, it serves as an analog multiplier/divider in various electronic systems.
AD534JDZ
AD534JDZ by Analog Devices is an analog computational IC with 14 terminals, operating at ±15V supplies. It features a ceramic-metal-sealed package, 1 kHz bandwidth, and bipolar technology. Ideal for applications requiring analog multiplication or division functions in commercial temperature environments.
TL441CNSRE4
TL441CNSRE4 by Texas Instruments is a dual-function analog computational IC with a nominal voltage of +-6V and 40 kHz nominal bandwidth. It is used as a log or antilog amplifier in commercial-grade applications, featuring a small outline package style and gull wing terminal form for surface mount assembly.
MPY634KP
Burr-Brown Corporation
ANALOG MULTIPLIER OR DIVIDER; Temperature Grade: OTHER; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
5962R9864602VXX
Analog Devices' 5962R9864602VXX is a MILITARY-grade Analog Computational IC with 16 terminals, operating b/w -55 to 125 °C. It features a Nominal Voltage of 5 V, offering LOG OR ANTILOG AMPLIFICATION. Ideal for applications requiring high radiation tolerance and bandwidth up to 395 kHz.
LOG102AIDRG4
The Texas Instruments LOG102AIDRG4 is an Analog Computational IC with 14 terminals, operating at -40 to 85°C. It features a bandwidth of 1.4 kHz, suitable for log or antilog amplification applications. With a small outline package and Gull Wing terminals, it supports supply voltages from ±4.5V to ±18V.
NE578N
NXP Semiconductors
NE578N by NXP Semiconductors is a dual-terminal compander in a rectangular plastic/epoxy package, ideal for audio signal processing. It features 16 terminals, a max height of 4.2 mm, and operates within commercial temperature grades. Perfect for enhancing dynamic range in communication systems.
LOG101AID
LOG101AID by Texas Instruments is an Analog Computational IC with 8 terminals, operating at -40 to 85°C. It has a supply voltage range of ±5V, bandwidth of 0.01 kHz, and consumes 1.5mA max current. Ideal for log or antilog amplification applications in industrial settings due to its compact size and bipolar technology.
AD539KN
AD539KN by Analog Devices is a 16-terminal IC with 2 functions, operating at -15V to +15V. With a bandwidth of 60 kHz, it serves as an analog multiplier/divider in commercial-grade applications. The package style is in-line, measuring 20.13mm x 7.62mm x 5.33mm and supports a supply voltage range of +-4.5V to +-5V for various analog computational tasks.
AD532JDZ
AD532JDZ by Analog Devices is an analog computational IC with 14 terminals, +/-15V power supplies, and a 1 kHz nominal bandwidth. It is used for analog multiplication or division applications in commercial temperature grades. The package style is in-line with a rectangular shape and ceramic-metal-sealed co-fired material.
AD8306AR-REEL7
AD8306AR-REEL7 by Analog Devices is a 16-terminal IC with a supply voltage range of 2.7V to 6.5V and max operating temperature of 85°C. It features a nominal bandwidth of 395 kHz, suitable for industrial applications requiring log or antilog amplification in small outline packages.
AD633JNZ
AD633JNZ by Analog Devices is an analog computational IC with 1 function. It has a rectangular package shape, matte tin terminal finish, and operates at temperatures b/w 0 to 70°C. This IC is commonly used as an analog multiplier or divider in various applications.
AD8304ARU-REEL
AD8304ARU-REEL by Analog Devices is an analog computational IC with 14 terminals, operating at -40 to 85 °C. It features a nominal bandwidth of 10 kHz, suitable for industrial applications requiring log or antilog amplification in a compact rectangular package. With a supply voltage range of 3-5.5 V and surface-mount capability, it offers precise signal processing in various electronic systems.
MAX2016ETI+D
MAX2016ETI+D by Analog Devices is a 28-terminal BICMOS chip with 2 functions, operating at -40 to 85 °C. It has a nominal voltage of 3.3 V and supports power supplies of 3/5 V. This analog computational device, with a bandwidth of 22 kHz, is ideal for industrial applications requiring log or antilog amplification in a compact square package.
MAX4002EUA+
LOG OR ANTILOG AMPLIFIER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD633JRZ
AD633JRZ by Analog Devices is an 8-terminal analog computational IC with a nominal voltage of +-15V. It operates in temperatures ranging from 0 to 70°C and has a nominal bandwidth of 1 kHz. Ideal for applications requiring analog multiplication or division, this small outline package IC is surface mountable and features bipolar technology.
AD633ARZ
AD633ARZ by Analog Devices is an 8-terminal analog computational IC with a nominal voltage of +-15V. It operates in industrial temperature grade, with a bandwidth of 1 kHz and can function as an analog multiplier or divider. The package is small outline, surface mountable, and has a rectangular shape for various applications in electronics.
AD633ARZ-R7
AD633ARZ-R7 by Analog Devices is an 8-terminal analog computational IC with a nominal voltage of ±15V. It operates in industrial temperature range (-40 to 85°C) and has a bandwidth of 1 kHz. Ideal for applications requiring analog multiplication or division functions in compact designs.
AD633JRZ-R7
ANALOG MULTIPLIER OR DIVIDER; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AD633JN
AD633JN by Analog Devices is an 8-terminal analog computational IC with a nominal voltage of +-15V. It operates in a temperature range of 0-70°C and has a max bandwidth of 1 kHz. Ideal for applications requiring analog multiplication or division functions in commercial-grade settings.
AD633JRZ-REEL
AD633JRZ-REEL by Analog Devices is an analog computational IC with 8 terminals and a supply voltage range of ±8V to ±18V. It operates in temperatures from 0°C to 70°C, offering a nominal bandwidth of 1 kHz. Ideal for applications requiring analog multiplication or division functions in commercial-grade environments.
AD633ARZ-RL
AD633ARZ-RL by Analog Devices is an 8-terminal analog computational IC with a nominal voltage of ±15 V. It operates in industrial temperature grade range from -40 to 85 °C and has a bandwidth of 1 kHz. Ideal for applications requiring analog multiplication or division, this small outline package IC is surface mountable and features bipolar technology.
ANALOG MULTIPLIER OR DIVIDER; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
AD633JR
AD633JR-REEL7
AD633JR-REEL7 by Analog Devices is an 8-terminal analog computational IC with a supply voltage range of +-15V. It operates in temperatures from 0 to 70°C and has a bandwidth of 1 kHz. Ideal for applications requiring analog multiplication or division functions in commercial-grade environments.
AD633AR
AD633AR by Analog Devices is an 8-terminal analog computational IC with a nominal voltage of +-15V. It operates in industrial temperature range (-40 to 85 °C) and has a bandwidth of 1 kHz. Widely used as an analog multiplier or divider, it comes in a small outline package suitable for surface mount applications.
AD632SH
ANALOG MULTIPLIER OR DIVIDER; Temperature Grade: MILITARY; No. of Terminals: 10; Package Shape: ROUND; Surface Mount: NO; Minimum Negative Supply Voltage (Vsup): -8 V;
AD632SH by Analog Devices is an analog computational IC with 10 terminals, operating temperature range of -55 to 125 °C. It has a supply voltage range of +-15 V and max supply current of 6 mA. Ideal for military-grade applications requiring analog multiplication or division functions at a bandwidth of 1 kHz.
AD633AN
ANALOG MULTIPLIER OR DIVIDER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
AD632AHZ
ANALOG MULTIPLIER OR DIVIDER; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: TO-100; Package Shape: ROUND; Surface Mount: NO;
AD632SH/883B
AD632SH/883B by Analog Devices is a military-grade analog computational IC with 1 function. It operates at temperatures ranging from -55 to 125 °C and has a nominal voltage of +-15 V. This IC is commonly used as an analog multiplier or divider in various applications.
ANALOG MULTIPLIER OR DIVIDER; Temperature Grade: MILITARY; No. of Terminals: 10; Package Shape: ROUND; Maximum Operating Temperature: 125 Cel; Terminal Position: BOTTOM;
AD632BHZ
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved