Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AD623AN by Analog Devices is an instrumentation amplifier with a max input offset voltage of 350uV and max average bias current of 0.0275uA. It operates at a nominal voltage of 5V, has a bandwidth of 0.8MHz, and is ideal for industrial applications requiring precise signal amplification.
Median Price
$4.650
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Freelance Electronics
1+ parts
100+ parts
-
1k+ parts
10k+ parts
VNN
Chip Stock
Vyrian
Digiode
ComSIT Distribution GmbH
J & M Industries LLC
Bristol Electronics
PC Components Company LLC
Nova Conductors
Inventory MP
North Shore Components
Electronics Depot
Prism Electronics
Cyclops Electronics Ltd
R&J Components
Ashlea Components Ltd
Electronic Expediters
LittleDiode
Vigor
$2.970
Advanced Electronics
$3.731
$3.544
Corohmni
$4.470
Aztec Data Supply Inc.
$4.840
Semicontronic
$5.410
$5.275
$5.248
Component Stockers USA
$5.460
$5.180
Parana Technologies
$6.049
$5.625
One Stop Electronics
$6.410
IDEA Electronic Components Group
$6.504
$6.179
Ampacity Inc.
$9.410
DigiPath Technology Company
$10.146
$9.740
AZTECH Wire
$14.142
Argo Parts USA
Assy Fe
Continental Prestige Electronics
Corphita
Perfect Parts
Bastille Electronics
Cyclops Electronics Ltd (Excess)
A-Plus Industry Inc.
PLASTIC/EPOXY - This material provides good protection for the internal components of the amplifier while keeping it lightweight.
350 uV - Low offset voltage ensures accurate output readings, making this amplifier suitable for precision measurement applications.
0.0275 uA - Low bias current results in minimal signal distortion, making this amplifier ideal for low-power applications.
RECTANGULAR - The compact rectangular shape allows for easy integration into various electronic systems.
5 - A nominal supply voltage of 5V ensures compatibility with a wide range of power sources.
5 - The use of a single 5V power supply simplifies the setup and operation of the amplifier.
8 - Having 8 terminals allows for easy connection to external components and provides flexibility in circuit design.
0.0025 uA - Low input offset current helps in maintaining signal integrity and accuracy in the amplifier's output.
IN-LINE - The in-line package style offers a space-efficient design, suitable for applications with tight space constraints.
6 V - The maximum supply voltage limit of 6V ensures the safety and reliability of the amplifier in high voltage environments.
85 °C - With a maximum operating temperature of 85°C, this amplifier can withstand harsh environmental conditions.
40 °C - The wide temperature range from -40 to 85°C allows for reliable operation in various temperature conditions.
TIN LEAD - The tin lead finish on the terminals provides excellent solderability and ensures secure connections in the circuit.
DUAL - Dual terminal positions offer flexibility in circuit layout and ease of connectivity in different configurations.
1000 - High voltage gain allows for amplification of weak signals with minimal noise interference.
5.33 mm - The low profile design with a maximum seated height of 5.33mm is suitable for applications with height restrictions.
7.62 mm - The compact width of 7.62mm enables easy placement of the amplifier on a circuit board without taking up excessive space.
0.8 MHz - The nominal bandwidth of 0.8 MHz ensures high-frequency response, making this amplifier suitable for signal processing in fast-changing environments.
9.88 mm - The length of 9.88mm provides a balanced form factor, making the amplifier suitable for various electronic applications.
INDUSTRIAL - The industrial temperature grade ensures reliable performance in demanding industrial environments.
6 V - The maximum negative supply voltage limit of -6V allows for dual power supply operation, increasing the versatility of the amplifier.
70 dB - With a minimum common mode reject ratio of 70dB, this amplifier can effectively eliminate common-mode noise for accurate signal processing.
THROUGH-HOLE - The through-hole terminal form provides secure mounting and a stable connection in the circuit.
INSTRUMENTATION AMPLIFIER - Being an instrumentation amplifier, this product is specifically designed for accurate signal amplification in measurement and instrumentation applications.
0.625 mA - The low supply current consumption of 0.625mA ensures energy efficiency and prolongs the battery life in portable applications.
5 V - The nominal negative supply voltage of -5V enables bipolar supply operation, expanding the amplifier's applicability.
0.3 V/us - The nominal slow rate of 0.3V/us ensures stable and gradual amplification of input signals, reducing the risk of signal distortion.
2.54 mm - The terminal pitch of 2.54mm provides compatibility with standard PCB layouts, making the amplifier easy to integrate into existing systems.
Instrumentation Amplifiers AD623AN attributes and parameters. Explore more Instrumentation Amplifiers devices from Analog Devices
Amplifier Type:
Power Supply:
Total Functions:
Sub-Category:
Nominal Bandwidth (3dB):
Nominal Slew Rate:
Minimum Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Peak Bias Current:
Maximum Supply Current:
Minimum Voltage Gain:
Maximum Voltage Gain:
Maximum Input Offset Current (IIO):
Nominal Supply Voltage:
Maximum Supply Voltage:
Nominal Negative Supply Voltage (Vsup):
Maximum Negative Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
AD623AN Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Frontier Electronics
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDV303N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Micropac Industries
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA2322EA/2K5
Texas Instruments
INA2322EA/2K5 by Texas Instruments is a CMOS instrumentation amplifier with 14 terminals. It has a max input offset voltage of 11000 uV and a nominal voltage of 5V, making it suitable for military applications requiring precise signal amplification in small spaces. With a max non-linearity of 0.015% and a bandwidth of 0.5 MHz, this amplifier offers high performance in harsh environments.
INA128UA
Burr-Brown Corporation
INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
INA163UA
INA163UA by Texas Instruments is an instrumentation amplifier with 250uV max input offset voltage, 12uA max average bias current, and 100dB min common mode reject ratio. Ideal for industrial applications requiring precise signal amplification in a compact package.
INA155UA
INSTRUMENTATION AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
XINA818ID
XINA818ID by Texas Instruments is an instrumentation amplifier with 75uV max input offset voltage, 2uA max average bias current, and 1000 max voltage gain. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and 90dB min common mode reject ratio.
PGA102KP
INSTRUMENTATION AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
XINA823DR
XINA823DR by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 190uV and max average bias current of 0.01uA. It has a nominal voltage of 15V, making it suitable for precision signal amplification in applications requiring high accuracy and low power consumption. The small outline package with dual terminals and gull wing form factor makes it ideal for compact designs where space is limited.
LT6370IDD#PBF
Analog Devices
LT6370IDD#PBF by Analog Devices is an instrumentation amplifier with 60uV max input offset voltage, 0.0008uA max average bias current, and 3.1MHz nominal bandwidth. Ideal for industrial applications requiring high precision amplification in a compact package with a wide temperature range.
AD623BR
AD623BR by Analog Devices is an instrumentation amplifier with a max voltage gain of 1000 and bandwidth of 0.8 MHz. It operates at industrial temperatures, has a supply voltage of ±5V, and is suitable for precision signal conditioning in various applications.
INA125UA/2K5
INA125UA/2K5 by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 250uV and bias current of 0.05uA. Ideal for industrial applications, it offers a nominal bandwidth of 0.15MHz and a max voltage gain of 10000. Suitable for surface mount, it operates within a temperature range of -40 to 85 °C.
INA321E/2K5
AD8227BRZ-RL
AD8227BRZ-RL by Analog Devices is an instrumentation amplifier with a max input offset voltage of 100uV and max average bias current of 0.027uA. It operates at a nominal voltage of 15V, making it suitable for automotive applications requiring high precision amplification in a compact package.
INA2128UA/1K
INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
PGA204BU
MAX41400ANL+T
Maxim Integrated
INSTRUMENTATION AMPLIFIER; Terminal Form: BALL; No. of Terminals: 9; Package Code: VFBGA; Package Shape: RECTANGULAR; Minimum Voltage Gain: 10;
LT6370HMS8#TRPBF
LT6370HMS8#TRPBF by Analog Devices is an instrumentation amplifier with 35uV max input offset voltage, 0.0006uA max average bias current, and 3.1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and 88dB min common mode reject ratio.
LTC6373IDFM#TRPBF
LTC6373IDFM#TRPBF by Analog Devices is an Instrumentation Amplifier with 275uV Max Input Offset Voltage, 0.00005uA Max Average Bias Current, and 6.5MHz Nominal Bandwidth. Ideal for precision signal processing in applications requiring low offset voltage and high common-mode rejection ratio.
INA321E/250
INA321E/250 by Texas Instruments is an instrumentation amplifier with 500uV max input offset voltage, 0.00001uA max average bias current, and 5V nominal voltage. Ideal for military applications due to its -55 to 125 °C operating temperature range and CMOS technology.
INA111AU/1K
XTR105UG4
XTR105UG4 by Texas Instruments is an instrumentation amplifier with 100uV max input offset voltage, 0.025uA max average bias current, and 24V nominal voltage. Ideal for industrial applications requiring high precision amplification in a compact package with surface mount capability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
AD620ARZ
AD620ARZ by Analog Devices is an instrumentation amplifier with 150uV max input offset voltage, 1MHz nominal bandwidth, and 10k max voltage gain. Ideal for industrial applications requiring precise signal amplification in a compact package with dual terminals and low power consumption.
AD620BRZ
AD620BRZ by Analog Devices is an instrumentation amplifier with a max input offset voltage of 85uV, max average bias current of 0.0015uA, and a max voltage gain of 10000. It is commonly used in industrial applications for amplifying signals with high accuracy and low noise.
AD620ANZ
AD620ANZ by Analog Devices is an instrumentation amplifier with a max input offset voltage of 150uV, ideal for industrial applications. It operates at a nominal voltage of +-15V and has a max voltage gain of 10, with a bandwidth of 1MHz. The package material is plastic/epoxy, making it suitable for various electronic designs.
AD620ARZ-REEL
AD620ARZ-REEL by Analog Devices is an instrumentation amplifier with 150uV max input offset voltage, 1MHz bandwidth, and 10k max voltage gain. Ideal for industrial applications requiring precise signal amplification in a compact package.
AD623ARZ
AD623ARZ by Analog Devices is an instrumentation amplifier with a max voltage gain of 1000 and bandwidth of 0.8 MHz. It operates at industrial temperature range (-40 to 85 °C) and has a supply current of 0.625 mA. Ideal for precision signal amplification in various applications.
AD623ARZ-R7
AD623ARZ-R7 by Analog Devices is an instrumentation amplifier with a max voltage gain of 1000 and bandwidth of 0.8 MHz. It operates at temperatures ranging from -40 to 85 °C and is suitable for industrial applications requiring precise signal amplification in compact spaces.
AD625KN
AD625KN by Analog Devices is an Instrumentation Amplifier with 50uV Max Input Offset Voltage, 0.025uA Max Average Bias Current, and 15V Nominal Voltage. Ideal for precision signal processing in industrial automation, medical devices, and test equipment applications.
AD620ARZ-REEL7
AD620ARZ-REEL7 by Analog Devices is an instrumentation amplifier with 150uV max input offset voltage, 1MHz bandwidth, and 10,000 max voltage gain. Ideal for industrial applications requiring precise signal amplification in a compact package with -40 to 85°C operating temperature range.
AD620AN
AD620AN by Analog Devices is an instrumentation amplifier with 150uV max input offset voltage, 1MHz bandwidth, and 10k max voltage gain. Widely used in industrial applications for precise signal amplification due to its high CMRR of 80dB and low bias current of 0.0025uA. Package style is rectangular with through-hole terminals.
AD620BRZ-R7
AD620BRZ-R7 by Analog Devices is an instrumentation amplifier with 85uV max input offset voltage, 1MHz nominal bandwidth, and 86dB min common mode reject ratio. Ideal for industrial applications requiring precise signal amplification in a compact package.
AD623ARMZ
INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
AD620BR-REEL7
AD620BR-REEL7 by Analog Devices is an instrumentation amplifier with a max voltage gain of 10000 and bandwidth of 1 MHz. It operates in industrial temperature range (-40 to 85 °C) and has low bias current (0.0015 uA), making it ideal for precision measurement applications. The package is small outline, surface mountable, with dual terminals and Gull Wing form factor.
AD620AR
AD620AR by Analog Devices is an instrumentation amplifier with 150uV max input offset voltage, 1MHz bandwidth, and 10k max voltage gain. Widely used in industrial applications for precise signal amplification due to its high common mode rejection ratio of 80dB.
AD620BR
AD620BR by Analog Devices is an instrumentation amplifier with a max input offset voltage of 85uV and max average bias current of 0.0015uA. It operates at a nominal voltage of +-15V, making it ideal for industrial applications requiring precise signal amplification in tight spaces.
AD620AR-REEL
AD620AR-REEL by Analog Devices is an Instrumentation Amplifier with 150uV Max Input Offset Voltage, 1MHz Nominal Bandwidth, and 10000 Max Voltage Gain. Ideal for industrial applications requiring precise signal amplification in a compact package with a wide temperature range.
AD620BR-REEL
AD620BR-REEL by Analog Devices is an instrumentation amplifier with a max input offset voltage of 85uV, ideal for industrial applications. It features a nominal bandwidth of 1MHz and a max voltage gain of 10,000, making it suitable for precise signal amplification in various electronic systems. With a compact rectangular package style and surface mount capability, this amplifier offers high performance within tight space constraints.
AD625KNZ
AD625KNZ by Analog Devices is an instrumentation amplifier with 50uV max input offset voltage, 0.025uA max average bias current, and 10000 max voltage gain. Ideal for precision signal processing in applications requiring high accuracy and low noise such as medical devices or industrial sensors.
AD620BRZ-RL
AD620BRZ-RL by Analog Devices is an instrumentation amplifier with a max input offset voltage of 85uV and max average bias current of 0.0015uA. It operates at a nominal voltage of +-15V, making it ideal for industrial applications requiring precise signal amplification in tight spaces.
AD623ARZ-RL
AD623ARZ-RL by Analog Devices is an instrumentation amplifier with a max voltage gain of 1000, ideal for industrial applications. It operates b/w -40 to 85 °C and has a bandwidth of 0.8 MHz. With a compact rectangular package style, it features low bias current and high common mode rejection ratio.
AD620BN
AD620BN by Analog Devices is an Instrumentation Amplifier with 1 function, 85uV Max Input Offset Voltage, and 1MHz Nominal Bandwidth. Ideal for industrial applications requiring precise signal amplification in a compact package with +-15V Power Supplies and -40 to 85°C Operating Temperature range.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved