Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AD570SD by Analog Devices is an 8-bit ADC with 0.2% linearity error, 40us conversion time, and operates at -55 to 125 °C. It is used in military-grade applications requiring a parallel output format, with a sample rate of 0.04 MHz and power supplies of 5V and -15V.
Median Price
$411.925
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Rochester
1+ parts
$391.720
100+ parts
$368.220
1k+ parts
$344.710
10k+ parts
-
Verical
Mouser Electronics
$425.860
DigiKey
Freelance Electronics
$172.845
Bristol Electronics
$368.087
Digiode
$417.876
VNN
Vyrian
ComSIT Distribution GmbH
Nova Conductors
Electronic Expediters
Electronics Depot
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Parana Technologies
$14.761
$13.728
Advanced Electronics
$15.867
$14.439
$13.011
IDEA Electronic Components Group
$15.872
$15.078
DigiPath Technology Company
$24.760
$23.770
Vigor
$310.130
Ampacity Inc.
$373.890
Corphita
$395.883
Corohmni
$466.390
Microchip USA
$736.830
Glotronic Ltd.
Futuretech Components
Authorized Procurement Solutions
Netroflash
Kepictronics
Assy Fe
Perfect Parts
This material ensures durability and reliability, making the product suitable for harsh environments.
Provides sufficient resolution for accurate analog-to-digital conversion.
Offers flexibility in power options for different applications.
Can withstand high operating temperatures, increasing the product's versatility.
Bipolar technology ensures high precision in analog-to-digital conversion.
Analog-to-Digital Converters AD570SD attributes and parameters. Explore more Analog-to-Digital Converters devices from Analog Devices
Converter Type:
No. of Analog In Channels:
No. of Functions:
No. of Bits:
Sub-Category:
Output Bit Code:
Output Format:
Maximum Linearity Error (EL):
Sample Rate:
Maximum Conversion Time:
Power Supplies:
Minimum Analog Input Voltage:
Maximum Analog Input Voltage:
Nominal Supply Voltage:
Nominal Negative Supply Voltage:
Maximum Supply Current:
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
Terminal Position:
No. of Terminals:
Terminal Form:
Terminal Pitch:
Surface Mount:
Width:
Maximum Seated Height:
Package Body Material:
Package Style:
Package Shape:
Package Equivalence Code:
Package Code:
JESD-30 Code:
Qualified:
JESD-609 Code:
AD570SD Converters trade compliance attributes, and parameters.
ECCN
3A001.A.2.C
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-148-3044, 5962011483044, 5962-99-168-6115, 5962991686115
NIIN
011483044, 991686115
PCN Design/Specification - AD571/AD570 Redesign 26/Apr/2012
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-TP
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ADS114S08IPBS
Texas Instruments
Texas Instruments ADS114S08IPBS is a 16-bit ADC with 12 analog channels, 0.0015% linearity error, and 0.004 MHz sample rate. Ideal for automotive applications due to its thin profile, fine pitch flatpack package and -50 to 125°C operating temperature range.
ADC0804LCN
Intersil
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
ADS122C04IRTER
ADS122C04IRTER by Texas Instruments is a 24-bit ADC with 4 analog in channels, 0.0015% EL, and 0.51 mA max supply current. Ideal for automotive applications due to its -40 to 125 °C operating temp range and serial output format. Package style: CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE.
ADS1114BQDGSRQ1
ADS1114BQDGSRQ1 by Texas Instruments is a 16-bit ADC with 0.0015% linearity error, ideal for automotive applications. It operates at -40 to 125°C, with a supply voltage of 2-3.3V and max analog input voltage of 6.144V. This small-outline converter has a sample rate of 0.00086 MHz and outputs data in serial format.
ADS7809UBG4
The Texas Instruments ADS7809UBG4 is a 16-bit ADC with 0.0031% EL, 1 analog in channel, and 5V supply. Ideal for industrial applications, it offers a sample rate of 0.1 MHz and operates b/w -40 to 85°C. With a small outline package style, it suits surface mount designs requiring high precision conversion.
ADS1234IPWR
ADS1234IPWR by Texas Instruments is a 24-bit ADC with 4 analog in channels, 0.001% EL, and 5V power supply. Ideal for industrial applications requiring high precision data conversion at temperatures ranging from -40 to 105°C. This small outline converter features a serial output format and operates at a sample rate of 0.00008 MHz.
MCP3021A1T-E/OT
Microchip Technology
MCP3021A1T-E/OT by Microchip is a 10-bit ADC with 0.0977% EL, 8.96us conversion time, and 0.25mA supply current. Ideal for automotive applications, it operates b/w -40 to 125°C with a max analog input voltage of 5.8V. The small outline package measures 2.95mm x 1.63mm x 1.45mm and features a serial output format at 0.0223MHz sample rate.
LTC1403CMSE#PBF
Linear Technology
ADC, PROPRIETARY METHOD; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE;
AD7997BRUZ-0REEL
Analog Devices
AD7997BRUZ-0REEL by Analog Devices is a 10-bit ADC with 8 analog input channels, operating at a sample rate of 0.188 MHz. It has a max linearity error of 0.0488% and supports a supply voltage range of 3V to 5V. Ideal for industrial applications requiring precise analog-to-digital conversion in compact designs with limited space constraints.
ADS1278IPAPT
Texas Instruments ADS1278IPAPT is an 8-channel ADC with 24-bit resolution, 0.0012% linearity error, and 0.144 MHz sample rate. Ideal for industrial applications requiring high-precision analog-to-digital conversion in a compact square package.
LTC2450IDC#TRMPBF
ADC, DELTA-SIGMA; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE;
AD7734BRUZ-REEL7
AD7734BRUZ-REEL7 by Analog Devices is a 24-bit ADC with 4 analog input channels, 0.0045% linearity error, and 0.0154 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package with a wide operating temperature range from -40°C to 105°C.
ADS1112IDGSRG4
ADS1112IDGSRG4 by Texas Instruments is a 16-bit ADC with 3 analog in channels, 0.01% linearity error, and 5V power supply. Ideal for industrial applications, it offers a sample rate of 0.00024 MHz and operates b/w -40 to 85°C. With a small outline package style, it's suitable for compact designs requiring precise analog-to-digital conversion.
MCP3208-BI/SLVAO
MCP3208-BI/SLVAO by Microchip Tech is an 8-channel ADC with 12-bit resolution, 0.0244% linearity error, and 0.1 MHz sample rate. Ideal for industrial applications, it operates b/w -40 to 85°C, has a max analog input voltage of 5V, and uses CMOS technology for accurate conversions in a small outline package.
ADS1118IDGST
Texas Instruments ADS1118IDGST is a 16-bit ADC with 4 analog in channels, 0.0015% linearity error, and 0.00086 MHz sample rate. Ideal for automotive applications due to its small size, low power consumption, and high accuracy in temperature monitoring systems.
AD7685ARMZRL7
AD7685ARMZRL7 by Analog Devices is a 16-bit ADC with 0.0092% EL, 3/5,5 V supplies, and 0.25 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package. With a small outline and thin profile, this ADC offers fast conversion times and high accuracy for temperature-sensitive environments.
ADC128S102CIMTX/NOPB
Texas Instruments ADC128S102CIMTX/NOPB is a 12-bit ADC with 8 analog in channels, operating at 1 MHz sample rate. It has a max linearity error of 0.0244%, suitable for industrial applications requiring precise analog-to-digital conversion within the temperature range of -40 to 105°C.
ADS1278IPAPTG4
ADS1278IPAPTG4 by Texas Instruments is a 24-bit ADC with 8 analog input channels, 0.144 MHz sample rate, and 0.0012% max linearity error. Ideal for industrial applications requiring high precision data acquisition in a compact package. Operates at temperatures ranging from -40 to 105°C with low power consumption of 145 mA at max supply voltage of 5V.
LTC2452CTS8#TRPBF
LTC2452CTS8#TRPBF by Analog Devices is a 16-bit ADC with 0.0153% max linearity error. It operates at -5.5V to 5.5V, has a sample rate of 0.00006 MHz, and uses CMOS technology. This converter type is ideal for applications requiring precise analog-to-digital conversion in commercial temperature grades.
ADS1115IRUGR
The Texas Instruments ADS1115IRUGR is a 16-bit ADC with 4 analog input channels, operating at 3.3V. With a max linearity error of 0.0015%, it's ideal for automotive applications due to its wide temperature range (-40 to 125°C) and compact chip carrier package style. The converter type is delta-sigma, offering a sample rate of 0.00086 MHz and serial output format.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD574AJNZ
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR;
Rochester Electronics
AD572SD
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 32; Package Code: DIP; Package Shape: RECTANGULAR;
AD570SCHIPS
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: MILITARY; Terminal Form: NO LEAD; No. of Terminals: 18; Package Code: DIE; Package Shape: RECTANGULAR;
AD571JD
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
AD572AD
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 32; Package Code: DIP; Package Shape: RECTANGULAR;
AD571JCHIPS
A/D CONVERTER; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Maximum Analog Input Voltage: 10 V; No. of Bits: 10; No. of Functions: 1;
AD572SD/883B
AD570JD/+
AD571KD
AD571KD/+
AD571SD/883B
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
AD571-000C
A/D CONVERTER; Temperature Grade: MILITARY; No. of Analog In Channels: 1; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel; Output Bit Code: BINARY, OFFSET BINARY;
AD572BD
AD570JN
A/D CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
AD571SCHIPS
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: MILITARY; Terminal Form: NO LEAD; No. of Terminals: 18; Package Code: DIE; Package Shape: UNSPECIFIED;
AD571JD/+
AD570JCHIPS
A/D CONVERTER; Temperature Grade: COMMERCIAL; Power Supplies (V): 5,-12/-15; Qualification: Not Qualified; Minimum Operating Temperature: 0 Cel; Package Equivalence Code: DIE OR CHIP;
AD570JD
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved