Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: T821; Mating Contact Finish: GOLD (15) OVER NICKEL (50); UL Flammability Code: 94V-0;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Gateway Technologies
1+ parts
$1.000
100+ parts
1k+ parts
$0.890
10k+ parts
Singapore Electronics
$1.100
$1.023
$0.979
$0.935
Headers & Edge Type Connectors T821108A2R100CEU attributes and parameters. Explore more Headers & Edge Type Connectors devices from Amphenol
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
T821108A2R100CEU Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
B02B-XASK-1(LF)(SN)
J S T Mfg
B02B-XASK-1(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 2 contacts, COPPER ALLOY material, and TIN finish. It has a terminal pitch of 2.5mm and UL Flammability Code of 94V-0. Ideal for applications requiring reliable male connectors on circuit boards.
640456-2
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 640456; UL Flammability Code: 94V-0; IEC Conformity: NO;
90814-0904
Molex
The Molex 90814-0904 header connector features a mating contact pitch of 0.05", insulation resistance of 1G ohm, and body width of 0.197". Ideal for board mounting with a max operating temperature of 105°C, it is commonly used in commercial applications requiring a rated current of 1.2A.
DTM06-12SA-E007
TE Connectivity
TE Connectivity's DTM06-12SA-E007 is a 2-row board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it handles up to 7.5A signal current at -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
640456-5
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Contact Material: COPPER ALLOY; Terminal Pitch (mm): 2.54;
280371-2
TE Connectivity 280371-2 is a BOARD CONNECTOR with 4 contacts, 0.1" pitch, and POLYETHYLENE insulator. It has a temperature range of -65 to 105°C and features BRASS contacts with Tin finish. Ideal for commercial applications requiring reliable connections in electrical systems.
10124017-1022125LF
Amphenol Communications Solutions
Amphenol Communications Solutions' 10124017-1022125LF is a 25-contact board stacking connector with 0.039" mating contact pitch and 707VAC dielectric voltage. Ideal for PCB applications, it features gold flash termination finish, liquid crystal polymer insulator, and male contact gender.
DM3CS-SF
Hirose Electric
The Hirose Electric DM3CS-SF is a card edge connector with 0.043" mating contact pitch, 500VAC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings, featuring male compression contacts and a surface mount termination type.
1410187-3
TE Connectivity's 1410187-3 header connector features a mating contact pitch of 0.07", insulation resistance of 1Gohm, and operates b/w -55 to 105°C. With a total of 112 contacts in a polarized design, it is ideal for board-to-board connections in commercial applications requiring durability and reliability.
B13B-PH-K-S(LF)(SN)
B13B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 1.098" length, and 800VAC dielectric voltage. Ideal for applications requiring male connectors with 2A signal current, operating b/w -25°C to 85°C.
1-640456-5
TE Connectivity 1-640456-5 is a 15-contact board connector with 0.1" pitch, TIN finish, and UL94V-0 flammability rating. Ideal for commercial applications, it features a 5A signal current rating and operates b/w -55°C to 105°C temperature range.
103948-9
TE Connectivity 103948-9 is a board connector with 10 contacts, 0.1" pitch, and 3A signal rating. It features POLYETHYLENE insulation, tin/lead finish, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable male connectors with latching mounting options.
DF40HC(3.0)-100DS-0.4V(58)
DF40HC(3.0)-100DS-0.4V(58) by Hirose Electric is a 2-row stacking connector with 100 contacts, 0.016" pitch, and 100VAC voltage rating. Ideal for board mounting applications in commercial settings due to its durability of 30 cycles and phosphor bronze contact material.
104168-1620
PCB CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
SM02B-BHSS-1-TB(LF)(SN)
SM02B-BHSS-1-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.138" pitch, 0.295" length, and 0.126" width. Ideal for SURFACE MOUNT applications, it features FEMALE contact gender, BRASS material, and POLYAMIDE insulator.
B2P-VH-FB-B(LF)(SN)
B2P-VH-FB-B(LF)(SN) by J S T Mfg is a 1-row, straight board connector with a contact pitch of 0.156 inches. It has a body length of 0.386 inch and width of 0.382 inch. This connector is commonly used in applications requiring male contacts and solder termination.
TSW-108-17-T-S
Samtec
TSW-108-17-T-S by Samtec is a 0.1 inch pitch board connector with 8 contacts and a max operating temperature of 105°C. It features a durable design with a mating contact finish of matte tin over nickel, making it suitable for various applications in electronics and PCB assemblies.
746-014-520-606
Edac
Edac 746-014-520-606 is a 14-contact card edge connector with 0.125" pitch, suitable for PCB mounting. Featuring 3A signal current rating, it has a dielectric strength of 1500VAC and operates b/w -40 to +105°C. Ideal for applications requiring high insulation resistance and UL94V-0 flammability rating.
22-55-2201
The Molex 22-55-2201 is a board connector with 20 contacts, 0.1" pitch, and 0.999" body length. It is used in commercial applications with -40 to 120°C operating temperature range for cable mounting via crimp termination.
640456-3
TE Connectivity 640456-3 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. Featuring TIN termination finish, it has a rated current of 5A and operates b/w -55 to 105°C. Ideal for use in electronics requiring a male contact gender with straight mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Amphenol
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved