Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol T3360010 circular connector features a threaded coupling type, polyethylene insulator material, and nickel shell finish. With 5 male contacts rated at 5A signal current, it is suitable for commercial applications with operating temperatures ranging from -40 to 100°C. The connector has a durability of 500 cycles and is DIN-conformance certified.
Median Price
$12.572
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$10.310
100+ parts
$8.450
1k+ parts
$8.090
10k+ parts
-
Interstate Connecting
$10.341
$8.470
$6.794
Heilind Electronics
$10.344
$10.033
$7.055
Mouser Electronics
$12.890
$10.020
$9.450
DigiKey
$15.110
$11.676
$9.134
Newark
$16.050
$12.040
$11.930
Farnell
$17.230
$12.060
$11.580
Element14
$18.410
$10.620
Verical
$12.255
Master Electronics
$10.420
$8.860
TTI
Nova Conductors
$8.535
TME
$7.320
Electro Sonic
$6.750
IBS Electronics
$16.237
$13.040
Vyrian
NAC Semi
$11.890
Van Brakel Electronic
Quittner & Schimek s.r.o.
ACDS - Activité Composants Distribution Service
LIBRA Elektronik GmbH
SPM Sales
Aztec Data Supply Inc.
$5.896
Gateway Technologies
$8.350
$7.431
Continental Prestige Electronics
$8.394
$8.226
Netroflash
$8.364
Ampacity Inc.
$8.590
Singapore Electronics
$9.185
$8.542
$8.174
$7.807
Perfect Parts
Argo Parts USA
Cyclops Electronics Ltd (Excess)
Abacus Technologies
Corohmni
Assy Fe
High insulation resistance ensures reliable and stable signal transmission, reducing the risk of electrical interference.
Ability to withstand high temperatures makes it suitable for a variety of industries and environments.
Brass construction offers durability and corrosion resistance, ensuring a long lifespan for the connector.
Sufficient number of contacts for connecting multiple signals, providing flexibility in application use.
Cable mounting option simplifies the installation process, making it easy to integrate into existing systems.
Other Function Circular Connectors T3360010 attributes and parameters. Explore more Other Function Circular Connectors devices from Amphenol
Additional Features:
Backshell Type:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Coupling Type:
DIN Conformance:
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
T3360010 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Panjit International
Bytesonic Electronics
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Surge Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
T4110012081-000
TE Connectivity
TE Connectivity's T4110012081-000 circular connector features EMI shielding, 30V rated voltage, and threaded coupling. Ideal for applications requiring a durable, polarized female connector with 8 contacts. Operating temperature range from -40 to 85°C makes it suitable for various environments.
1607736
Phoenix Contact
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
35664
Woodhead Industries
CIRCULAR CONNECTOR; Manufacturer Series: 35664; IEC Conformity: NO; DIN Conformance: NO; MIL Conformity: NO;
7000-12421-6340500
Murrelektronik
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
SLPPB35BSB4
Amphenol
Amphenol SLPPB35BSB4 is a circular connector with SNAP coupling, suitable for environments from -40°C to 125°C. Featuring a solid backshell and crimp termination, it is ideal for cable mounting applications requiring male contact gender.
T4145015051-001
TE Connectivity T4145015051-001 is a circular connector with 5 contacts, nickel finish, and brass shell. It operates b/w -40°C to 85°C, suitable for applications requiring a polarized female receptacle with round pin sockets. Ideal for panel mounting in environments with 115/230VAC mains connector rating.
1681169
Phoenix Contact 1681169 is a threaded circular connector with gold contact finish, suitable for cable mounting. Featuring 4 contacts, polyamide shell material, and solder termination type. Ideal for applications requiring reliable male plug connections like SACC-M8FS-4CON-M mating info.
1-5830611-1
TE Connectivity 1-5830611-1 is a circular connector with rated voltage of 10kV, operating temperature range from -55 to 125°C. It features one female contact with solid backshell and supports cable mounting. Ideal for applications requiring high voltage and temperature resistance.
HDP24-24-31SE
TE Connectivity's HDP24-24-31SE is a circular connector with 31 contacts, rated at 250V and 13A. With GLASS FILLED POLYAMIDE insulator, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized, UL-rated connector with solid backshell and strain relief mounting on panels.
T4141012041-000
TE Connectivity's T4141012041-000 is a circular connector with 4 female contacts, rated for 250V and 85°C. It features preassembled connections, solder termination, and brass shell material. Ideal for board mounting applications requiring a polarized, nickel-finished connector with a total of 4A signal current capacity.
1-796406-2
Tyco Electronics Amp
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 796406; Total No. of Contacts: 37; Insulator Material: POLYETHYLENE;
T4113412041-000
TE Connectivity T4113412041-000 is a threaded circular connector with EMI shielding, rated for 250V and 4A signal current. With brass shell material, it has 4 male contacts in a plug body style. Ideal for applications requiring durable connections at temperatures ranging from -40 to 85°C.
192900-0308
Itt Cannon
192900-0308 by ITT Cannon is a circular connector with bayonet coupling, polyamide insulator, and 12 female contacts. It features a solid backshell and corrosion-resistant design. Ideal for panel mounting applications in industries requiring reliable and durable connections.
15.0302
Staeubli Electrical Connectors Ag
CIRCULAR CONNECTOR;
1200060019
Molex
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
T4113002081-000
TE Connectivity's T4113002081-000 is a threaded circular connector with 8 contacts, rated for 30V and 2A. Made of polybutylene terephthalate, it operates b/w -40 to 85°C. Ideal for applications requiring durable male connectors with polarized shells in industrial settings.
SLPPA25BSR1
The Amphenol SLPPA25BSR1 is a circular connector with SNAP coupling, suitable for temperatures ranging from -40 to 125°C. Featuring a solid backshell and environment-resistant design, it is ideal for cable mounting applications requiring male contact gender and UL reference standard compliance.
HD10-9-1939PE-P080
TE Connectivity's HD10-9-1939PE-P080 is a circular connector with 1.66"x1.437"x1.437" dimensions, GLASS FILLED POLYAMIDE insulator, and 250V rated voltage. It has 9 contacts, UL certification, and operates b/w -55°C to 125°C. Ideal for applications requiring a polarized housing, this connector supports a max current of 13A in male gender configuration with strain relief mounting option on panels.
C01620G00320012
Amphenol C01620G00320012 is a threaded circular connector with gold contact finish, 4 contacts, and polyamide66/6 shell material. It is ideal for cable mounting applications requiring reliable female contact termination using screw termination method.
HDP24-24-19PE-L017
TE Connectivity's HDP24-24-19PE-L017 is a circular connector with 19 contacts, rated at 250V and 25A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized male connector with solid backshell, UL-rated for safety in panels.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
T3360001
Other Circular Connectors; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Style: RND PIN-SKT; Mating Contact Finish: AG;
T3362400
Amphenol T3362400 is a threaded circular connector with nickel finish, 5 contacts, and solid backshell. Ideal for panel mounting applications, it features male contact gender and solder termination. Made of metal, this receptacle connector is suitable for various industrial uses.
T3363000
Other Circular Connectors; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Shell Finish: NICKEL; Mounting Option-2: SCREW;
T3361001U
T3363100
The Amphenol T3363100 is a threaded circular connector with 5 contacts, nickel finish, and brass shell. DIN conformance ensures quality. Ideal for panel mounting applications requiring solder termination in female receptacles.
T3363009
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED; Mixed Contacts: NO;
T3360551
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Shell Material: BRASS; Filter Feature: NO;
T3361001
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; DIN Conformance: YES; Contact Resistance: 5 mohm;
T3361010
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Shell Finish: NICKEL; Mating Contact Finish: AG;
T3361551
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; IEC Conformity: NO; Mounting Option-1: LOCKING;
T3361055
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; MIL Conformity: NO; Filter Feature: NO;
T3363010
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; Termination Type: SOLDER;
T3362000
Amphenol T3362000 is a threaded circular connector with polyethylene insulator, rated for 5A signal current. With nickel finish and male contact gender, it has 5 contacts and operates b/w -40 to 100°C. Ideal for commercial applications requiring high insulation resistance of 10^10 ohm.
T3362100
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body Depth: .63 inch; Mating Contact Finish: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved