Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol SLPRBTPSB is a circular connector with a body depth of 0.99 inch and a snap coupling type. It has a max operating temperature of 125°C and a min operating temperature of -40°C. This connector, with its solid backshell and crimp termination type, is commonly used in applications requiring reliable female contact connections.
Median Price
$10.442
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$4.630
100+ parts
-
1k+ parts
10k+ parts
Arrow
$9.324
$7.199
$6.549
TTI
$9.940
$7.510
$6.960
RS Americas
$7.650
$6.760
Element14
$8.150
$7.023
Mouser Electronics
$12.740
$10.190
$9.460
Newark
$13.110
$10.600
$10.530
DigiKey
$13.130
$9.486
$8.065
Chip1Stop
$13.300
$7.290
Distrelec
$13.717
$11.767
Farnell
$16.544
$13.228
TTI Europe
$23.458
$6.967
$6.143
Master Electronics
$9.590
$7.930
Powell Electronics
$7.350
$6.710
Verical
$6.265
Nova Conductors
$7.247
Vyrian
IBS Electronics
$6.888
$6.287
Rutronik
$6.630
Electro Sonic
$7.230
$6.130
$5.890
Gateway Technologies
$6.449
Ampacity Inc.
$7.760
Singapore Electronics
$7.971
$7.413
$7.094
$6.775
Continental Prestige Electronics
$10.460
Argo Parts USA
Netroflash
$7.102
$6.885
$6.740
Abacus Technologies
The compact body depth of 0.99 inch makes this circular connector suitable for applications requiring space-saving designs without compromising functionality.
The snap coupling type enables quick and easy installation and removal of the connector, making it convenient for applications that require frequent assembly and disassembly.
With a maximum operating temperature of 125°C, this circular connector can withstand high-temperature environments, ensuring reliable performance in demanding conditions.
The circular connector's ability to operate at temperatures as low as -40°C allows it to be used in extreme cold environments without compromising its functionality.
This circular connector design provides a versatile and reliable connection solution for a wide range of applications, making it a suitable choice for various electrical and electronic systems.
Compliance with the UL reference standard ensures that this circular connector meets safety and performance requirements, ensuring its reliability and suitability for use in different industries.
With a single contact, this circular connector is ideal for applications that require a simple and straightforward connection, reducing complexity and lowering the risk of errors during installation.
The solid backshell of this circular connector offers enhanced protection and strain relief for cable connections, reducing the risk of damage and ensuring reliable connectivity in demanding environments.
The cable and panel mounting options of this circular connector provide flexibility in installation, making it compatible with various mounting setups and easy to integrate into different systems.
The crimp termination type simplifies the assembly process by securely attaching the connector to the cable, ensuring a reliable and structurally strong connection.
The female contact gender of this circular connector allows it to mate with male connectors, providing a versatile and standard connection solution for various devices and systems.
The receptacle-style body or shell design of this circular connector allows it to accept multiple mating connectors, making it suitable for applications that require multiple connections or connections to different devices.
Other Function Circular Connectors SLPRBTPSB attributes and parameters. Explore more Other Function Circular Connectors devices from Amphenol
Backshell Type:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
Empty Shell:
Filter Feature:
Mating Info.:
Mixed Contacts:
Mounting Type:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Termination Type:
Total No. of Contacts:
SLPRBTPSB Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
ROHM
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Vishay Telefunken
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
Changzhou Starsea Electronics
Db Lectro
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
7000-12081-6230200
Murrelektronik
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
T4143012051-000
TE Connectivity's T4143012051-000 is a circular connector with 5 contacts, rated for 60V and 4A. It features preassembled female contacts, brass shell material, and solder termination. Ideal for board mounting applications requiring a polarized connector with nickel finish at temperatures ranging from -40 to 85°C.
HDP24-18-6PN-L017
TE Connectivity's HDP24-18-6PN-L017 is a circular connector with a body size of 1.762" x 1.75" x 1.625". It has a rated voltage of 250V and can handle a max operating temperature of 125°C. This connector, with its solid backshell and polarized design, is commonly used in applications requiring a male receptacle for signal currents up to 100A.
T4110002041-000
TE Connectivity's T4110002041-000 is a circular connector with gold over nickel termination, rated for 250V and 4A signal current. With a threaded coupling type and PBT insulator, it operates b/w -40 to 85°C. Ideal for applications requiring durable, polarized female connectors with 4 contacts in a receptacle shell size of 20.
1511857
Phoenix Contact
Phoenix Contact 1511857 is a threaded circular connector with 8 gold contacts. It features a solid backshell, zinc alloy shell material, and screw termination. Ideal for cable mounting applications requiring reliable male contact gender in plug body style.
RSC5/7
Belden
The Belden RSC5/7 circular connector features gold termination contact finish, threaded coupling type, and nickel-plated shell finish. Ideal for cable mounting applications, this male connector with 5 contacts is made of copper-zinc alloy for reliable performance in various industrial settings.
1606358
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
UTG0128S
Souriau
CIRCULAR CONNECTOR; Mixed Contacts: NO; Filter Feature: NO; Mounting Type: CABLE AND PANEL; Shell Size: 12; Coupling Type: BAYONET;
15.0307
Multi Contact Ag
CIRCULAR CONNECTOR;
T4040034031-000
TE Connectivity's T4040034031-000 circular connector features EMI shielding, operating temperatures from -40 to 85°C, and a rated signal current of 3A. Ideal for applications requiring polarized male connectors with brass shells, such as industrial machinery or electronic equipment.
ESTB002NN00330001000
TE Connectivity's ESTB002NN00330001000 is a circular connector with EMI shielding, rated for 63V. Featuring snap coupling, it operates b/w -20°C to 130°C. Ideal for applications requiring durability up to 500 cycles, such as mains connectors at 115/230VAC.
FGS.1M.305.XLMT
Lemo Usa
1-2399606-1
TE Connectivity 1-2399606-1 is a circular connector with rated voltage of 1000V and operating temperature range from -40 to 140°C. It has UL flammability rating of 94V-0, rated current of 500A, and male contact gender. Ideal for panel mounting applications requiring high power signal connections.
HD10-9-1939PE-B022
TE Connectivity's HD10-9-1939PE-B022 circular connector features 1.66"x1.75"x1.625" dimensions, GLASS FILLED POLYAMIDE insulator, and 250V rated voltage for applications requiring a 13A signal current. With UL certification and -55 to 125°C operating range, it is ideal for panel mounting with polarized housing and strain relief option.
1415011
CIRCULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1408574
SLPPA25BSB
Amphenol
The Amphenol SLPPA25BSB is a circular connector with SNAP coupling, suitable for temperatures ranging from -40 to 125°C. Featuring a solid backshell and environment-resistant design, it is ideal for cable mounting applications requiring male contact gender. Compliant with UL standards, this connector has a body depth of 0.89 inch.
T4112002041-000
TE Connectivity's T4112002041-000 is a threaded circular connector with 4A signal current rating. Featuring PBT insulator, it operates b/w -40 to 85°C. With 4 contacts and shell size of 20, it is ideal for applications requiring durable female receptacle connectors.
5-2399606-1
TE Connectivity 5-2399606-1 is a circular connector with rated voltage of 1000V and operating temperature range from -40 to 140°C. It has UL flammability rating of 94V-0, rated current of 500A, and male contact gender. Ideal for panel mounting applications requiring high current signal connections.
SLPPA25BSB1
Amphenol's SLPPA25BSB1 is a circular connector with SNAP coupling, suitable for temperatures ranging from -40 to 125°C. Featuring a solid backshell and environment-resistant design, it is ideal for cable mounting applications requiring male busbar termination. UL certified, this plug-style connector offers reliable connectivity in various industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLPRABPSB
The Amphenol SLPRABPSB is a circular connector with a body depth of 1.291 inch and a snap coupling type. It has a max operating temperature of 125°C and can withstand environmental resistance. This connector is commonly used for cable and panel mounting, with termination via busbar.
SLPRBTPSR
The Amphenol SLPRBTPSR is a circular connector with a body depth of 0.99 inch and a snap coupling type. It has a max operating temperature of 125°C and a min operating temperature of -40°C. This connector, which is UL reference standard compliant, has one contact and is commonly used for cable and panel mounting applications.
SLPRABPSR
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Mating Contact Finish: NOT SPECIFIED; Maximum Operating Temperature (Cel): 125;
SLPRA25CPSB
The Amphenol SLPRA25CPSB is a circular connector with SNAP coupling, suitable for temperatures ranging from -40°C to 125°C. Featuring a solid backshell and female contact gender, it is designed for busbar termination in environment-resistant applications on both cable and panel mounts.
SLPRATPSR
The Amphenol SLPRATPSR is a circular connector with SNAP coupling, suitable for environments ranging from -40°C to 125°C. Featuring a solid backshell and crimp termination, it is ideal for cable and panel mounting applications requiring female contact gender. Compliant with UL standards, this connector offers environment-resistant properties in a compact body style of 1.291" depth.
SLPRA25CPSO
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Backshell Type: SOLID; Maximum Operating Temperature (Cel): 125; Reference Standard: UL;
SLPRB35CPSB
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body Depth: .99 inch; Reference Standard: UL;
SLPRB50CPSR
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Reference Standard: UL; Maximum Operating Temperature (Cel): 125; Contact Material: NOT SPECIFIED;
SLPRBBPSB
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: .99 inch; Coupling Type: SNAP; Filter Feature: NO;
SLPRBTNNB
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: NOT APPLICABLE; Empty Shell: NO; Contact Material: NOT SPECIFIED;
SLPRBTNNO
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Backshell Type: SOLID; Empty Shell: NO; Termination Contact Finish: NOT APPLICABLE;
SLPRBTNNR
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Mixed Contacts: NO; Body Depth: .99 inch;
SLPRB35CPNB
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Reference Standard: UL; Termination Type: CRIMP; Backshell Type: SOLID;
SLPRB35CPNR
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Mixed Contacts: NO; Maximum Operating Temperature (Cel): 125;
SLPRB50CPNB
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Reference Standard: UL; Filter Feature: NO;
SLPRB50CPNR
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Termination Contact Finish: NOT APPLICABLE; Total No. of Contacts: 1;
SLPRBBPNB
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Backshell Type: SOLID; Contact Material: NOT SPECIFIED;
SLPRBTPNB
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Maximum Operating Temperature (Cel): 125; Termination Contact Finish: NOT APPLICABLE;
SLPRBTPNO
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Coupling Type: SNAP; Body or Shell Style: RECEPTACLE;
SLPRBTPNR
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 1; Termination Type: CRIMP; Empty Shell: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved