Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF STRAIGHT ADAPTER; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
Median Price
$211.280
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Gateway Technologies
$1.000
$0.890
Singapore Electronics
$1.100
$1.023
$0.979
$0.935
RF Adapters SF1132-6078 attributes and parameters. Explore more RF Adapters devices from Amphenol
Connector Type:
Mating Contact Finish:
Contact Material:
SF1132-6078 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.80.00
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
LM358AN
Onsemi
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
1N5819HW-7-F
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
M55339/02-30001
Sv Microwave
RF RIGHT ANGLED ADAPTER; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Style: RIGHT ANGLE; Adapter Style: SMA-SMA; Insulator Material: POLYTETRAFLUOROETHYLENE; Contact Material: BERYLLIUM COPPER, BERYLLIUM COPPER;
5011
Cobham Plc
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-FEMALE; Termination Contact Finish: GOLD; Mating Contact Finish: GOLD; DIN Conformance: NO;
1683471
Phoenix Contact
RF Y ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE-MALE; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Panel Mount: NO; MIL Conformity: NO;
1054425-1
TE Connectivity's 1054425-1 RF Adapter features 0.13 dB insertion loss, 18 GHz max operating frequency, and 1.14 VSWR. Ideal for commercial applications, this SMA-SMA adapter has a threaded coupling type and PTFE insulator material.
12-16-11
Trompeter Electronics
12-16-11 RF straight adapter by Trompeter Electronics is a panel mount connector with nickel termination contact finish. It has a male-female contact gender and plug-receptacle body style. This adapter is commonly used in RF applications for connecting different types of connectors.
5004
Aeroflex/inmet
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-MALE; IEC Conformity: NO; Maximum Operating Frequency: 18 GHz; DIN Conformance: NO;
5103
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-MALE; Additional Features: VSWR 1.07 AT 8 GHZ ALSO AVAILABLE; Panel Mount: NO; JESD-609 Code: e4;
5230
Api Technologies
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-FEMALE; Filter Feature: NO; Coupling Type: THREADED-THREADED; Additional Features: VSWR 1.20 AT 2 GHZ ALSO AVAILABLE;
R161.730.000
Radiall S A
R161.730.000 RF Adapter by Radiall S A features a low insertion loss of 0.16 dB and a high dielectric withstanding voltage of 2500VAC. With a threaded coupling type, it is ideal for applications requiring a max operating frequency of 11 GHz, such as telecommunications and aerospace industries.
5021
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Characteristic Impedance: 50 ohm; Panel Mount: NO; Coupling Type: THREADED-THREADED;
2991-6007
The SV Microwave 2991-6007 is an SMA-SMA RF straight adapter with a threaded coupling type and panel mount feature. It offers low insertion loss of 0.17 dB and high performance up to 18 GHz, making it ideal for applications requiring precise signal transmission in RF systems. The adapter's PTFE insulator material ensures reliable connectivity with a VSWR of 1.15 at 50 ohm impedance, suitable for various RF communication setups.
1122
Ddk
RF STRAIGHT ADAPTER; DIN Conformance: NO; IEC Conformity: NO; MIL Conformity: NO;
901-125-11
Amphenol
Amphenol's 901-125-11 is an RF adapter with a threaded coupling type and gold termination contact finish. It has an insertion loss of 0.13 dB and can operate at temperatures ranging from -65 to 165 °C. This SMA-SMA right angled adapter is suitable for applications up to 18 GHz in commercial settings.
5212
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-FEMALE; Panel Mount: YES; Contact Material: BERYLLIUM COPPER; Mating Contact Finish: GOLD;
5198
5198 by Cobham Plc is an RF Adapter with GOLD finish, THREADED coupling, and 7/16-DIN-TNC style. It has a VSWR of 1.3, operates up to 3 GHz, and has a characteristic impedance of 75 ohm. Ideal for male-male connections in high-frequency applications.
448091-2
TE Connectivity's 448091-2 RF Adapter features SLIDE ON-THREADED coupling, POLYTETRAFLUOROETHYLENE insulator, and BM-SMA adapter style. Ideal for commercial applications requiring a 50 ohm characteristic impedance and stainless steel shell material in a panel-mounted straight adapter configuration.
2994-6602
2994-6602 RF Adapter by Sv Microwave features low insertion loss of 0.12 dB, dielectric voltage withstand of 1400VAC, and threaded coupling type. Ideal for applications requiring high durability and operating temperatures ranging from -65 to 165°C. Suitable for use in RF systems up to 18 GHz with SMA-SMA adapter style.
3813
Lzr Electronics
The Lzr Electronics 3813 RF Adapter features BAYONET coupling, BNC-BNC adapter style, and RF RIGHT ANGLED connector type. With a characteristic impedance of 75 ohm, it is ideal for applications requiring MALE-FEMALE contact gender in PLUG-JACK body style.
1137
RF STRAIGHT ADAPTER; MIL Conformity: NO; DIN Conformance: NO; IEC Conformity: NO;
1057343-1
TE Connectivity's 1057343-1 RF Adapter features threaded coupling, TFE insulator, and N-SMA style. With 18 GHz max frequency, it suits commercial applications requiring panel-mounted female-female connectors with stainless steel shells. VSWR of 1.24 ensures reliable signal transmission in various setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved