Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol RJFSFTP5E0624 cable has stranded construction with PUR jacket and shielding. It is approved for ISO/IEC, rated at 230V, with -40 to 85 °C operating temperature range. Ideal for battlefield communication and CNC machines due to its tinned copper conductor, RJ45 connectors on both sides, and 0.25 mm2 cross-sectional area.
Median Price
$138.624
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$128.908
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$148.340
$112.576
FDH Electronics
$139.200
$112.588
$104.877
Vyrian
Nova Conductors
Gateway Technologies
$5.000
$4.450
Advanced Electronics
$5.485
$4.991
$4.498
Singapore Electronics
$5.500
$5.115
$4.895
$4.674
Ampacity Inc.
$118.430
Authorized Procurement Solutions
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Ensures that the product meets international standards for quality and safety
Provides flexibility and durability to the cable for easy installation and longevity
Polyurethane jacket material offers excellent resistance to abrasion, oil, and solvents
Shielding helps protect against electromagnetic interference, ensuring a reliable signal transmission
Suitable for use in various electrical applications requiring a voltage rating of up to 230V
Polyethylene insulation provides good electrical properties and mechanical strength
Designed for demanding applications like battlefield communication and CNC machines, ensuring reliability in tough environments
Can withstand high temperature environments without compromising performance
Capable of operating in extremely cold conditions without risk of damage
24 AWG wire gauge ensures a good balance between conductivity and flexibility
Optimal diameter for easy handling and installation in various applications
The stranding pattern offers flexibility while maintaining strength, reducing the risk of breakages
Equipped with RJ45 connectors for easy and secure connections
Ensures compatibility with standard networking devices and systems
Optimal cross-sectional area for efficient signal transmission and reduced resistance
Tinned copper conductor provides excellent conductivity and corrosion resistance
Low resistance ensures minimal signal loss and efficient power transmission
Multiple conductors allow for complex signal configurations and data transmission
Pre-assembled cable for easy installation and immediate use in various applications
Electrical Wires & Cables RJFSFTP5E0624 attributes and parameters. Explore more Electrical Wires & Cables devices from Amphenol
Additional Features:
Application:
Approvals (V):
Conductor Material:
Connector Side-1:
Connector Side-2:
Connector Accessory Type:
Construction:
Cross Section Area:
Diameter:
Insulator Material:
Jacket Material:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Voltage:
Resistance:
Shielding:
Stranding:
Wire Gauge (AWG):
Wire & Cable Name:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
Diotec Semiconductor Ag
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
General Instrument
3051/1GR005
Alpha Wire
Alpha Wire's 3051/1GR005 is a CSA and UL approved electrical wire with solid construction, PVC insulation, and tinned copper conductor. Rated for 300V, it operates b/w -40 to 105°C. Ideal for flexible cord and fixture wiring applications.
2273112-4
TE Connectivity
TE Connectivity's 2273112-4 is a communication cable with 22 AWG wire gauge, rated for 250V DC and 4A current. It operates b/w -40°C to 80°C, suitable for various electrical applications requiring straight mounting style. With a diameter of 4.3mm and length of 1.5mm, it offers reliable connectivity in diverse environments.
32065
Helukabel
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Construction: STRANDED; DIN Conformity: NO; Minimum Operating Temperature: -40 Cel;
2451320410
Molex
Molex 2451320410 wire is UL approved for 300V, AWG 20 gauge, and 5.5mm diameter. Ideal for POWER applications with MICRO-FIT 3.0 connectors on both sides, ensuring reliable electrical connections in various setups.
U.FL-2LP-088K1T-A-(50)
Hirose Electric
U.FL-2LP-088K1T-A-(50) by Hirose Electric is a stranded communication cable with FEP jacket and shielding. It has a conductor made of annealed copper, operates b/w -40 to 90°C, and is suitable for electronic and wireless applications. With a wire gauge of 30 AWG, diameter of 1.37 mm, and stranding of 7X0.102, it features PLUG connectors on both sides.
VHA00009-2M
L-com
CABLE ASSEMBLY;
CO-174SMAZBNC-000.6
Amphenol
IDSD-20-D-06.00-T-G-D04
Samtec
Samtec's IDSD-20-D-06.00-T-G-D04 is a UL-approved stranded flat cable with 40 conductors, rated for 425V and 3.4A. Constructed with tin-finished copper alloy conductors and PVC insulation, it operates b/w -20°C to 105°C. Ideal for electrical wiring applications requiring flexibility and high current capacity.
HDAMFLOC
Infinite Electronics International
M22759/32-22-0
Allied Wire & Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; IEC Conformity: NO; Construction: STRANDED; Insulator Material: CROSS-LINKED ETFE;
55A0111-22-9
TE Connectivity's 55A0111-22-9 wire is CSA, CAA, MIL, UL approved with stranded construction and tin finish. Rated for 600V with -65 to 150°C operating range, it features copper alloy conductor and 0.053 ohm resistance. Ideal for flexible cord and fixture wire applications.
87230601000
Belden
Belden 87230601000 is a UL-approved stranded wire with PVC jacket, PP insulator, and tinned copper conductor. With 4 conductors, rated voltage of 300V, and operating temperature range from -20 to 75°C, it's ideal for flexible cord and fixture wire applications.
M22759/43-22-9
Judd Wire
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Diameter: 1.27 mm; Conductor Material: COPPER; Construction: STRANDED;
8451010U500
WIRE AND CABLE;
52052
Helukabel 52052 is a CE and EAC approved power cable with shielding, rated for 500V. Featuring nickel conductor finish, it's ideal for iron and steel works, rolling mills, and foundries. With a temperature range of -60 to 400 °C, this copper alloy cable has 7 conductors at 4mm2 cross-section area.
2451320210
Molex 2451320210 wire is UL approved with a rated voltage of 300V, AWG 20 gauge, and 5.5mm diameter. Ideal for POWER applications, it features MICRO-FIT 3.0 connectors on both sides for reliable electrical connections.
2451320610
Molex 2451320610 is a UL-approved electrical wire with 300V rating, AWG 20 gauge, and 5.5mm diameter. Ideal for POWER applications, it features MICRO-FIT 3.0 connectors on both sides for secure connections in various electronic setups.
18615
WIRE AND CABLE; Rated Voltage: 450 V; Shielding: NO; Wire Gauge (AWG): 12; Jacket Material: POLYURETHANE; Construction: STRANDED;
6547UE8771000
1110051020
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RJFSFTP6A0150
RJFSFTP5E0305
Amphenol RJFSFTP5E0305 cable assembly features stranded construction with PUR jacket, shielding, and ISO/IEC approvals. Ideal for battlefield communication and CNC machines, it has a rated voltage of 230V, operating temperature range from -40 to 85°C, and tinned copper conductors in 24 AWG size.
RJFSFTP5E0152
CABLE ASSEMBLY; Connector Side-1: RJ45; Connector Side-2: RJ45; Rated Voltage: 230 V; Shielding: YES; IEC Conformity: NO;
RJFSFTP6A0100
RJFSFTP6A1000
RJFSFTP6A0200
RJFSFTP5E1000
CABLE ASSEMBLY; Connector Side-1: RJ45; Connector Side-2: RJ45; Rated Voltage: 230 V; Shielding: YES; Construction: STRANDED;
RJFSFTP5E0076
CABLE ASSEMBLY; Connector Side-1: RJ45; Connector Side-2: RJ45; Rated Voltage: 230 V; Shielding: YES; Wire & Cable Name: CABLE ASSEMBLY;
RJFSFTP5E0100
CABLE ASSEMBLY; Connector Side-1: RJ45; Connector Side-2: RJ45; Rated Voltage: 230 V; Shielding: YES; Jacket Material: PUR;
RJFSFTP5E0457
CABLE ASSEMBLY; Connector Side-1: RJ45 PLUG; Connector Side-2: RJ45 PLUG; Rated Voltage: 230 V; Shielding: YES; Conductor Material: TINNED COPPER;
RJFSFTP5E0500
CABLE ASSEMBLY; Connector Side-1: RJ45; Connector Side-2: RJ45; Rated Voltage: 230 V; Shielding: YES; Additional Features: STANDARD: ISO/IEC 11801, APPLICATION: INDUSTRIAL PROCESS CONTROL, MOTION CONTROL, RAILWAYS, ROBOTICS;
RJFSFTP5E0600
CABLE ASSEMBLY; Connector Side-1: RJ45; Connector Side-2: RJ45; Rated Voltage: 230 V; Shielding: YES; Minimum Operating Temperature: -40 Cel;
RJFSFTP5E0762
CABLE ASSEMBLY; Connector Side-1: RJ45 PLUG; Connector Side-2: RJ45 PLUG; Rated Voltage: 230 V; Shielding: YES; Additional Features: STANDARD: ISO/IEC 11801, APPLICATION: INDUSTRIAL PROCESS CONTROL, MOTION CONTROL, RAILWAYS, ROBOTICS;
RJFSFTP5E0800
CABLE ASSEMBLY; Connector Side-1: RJ45; Connector Side-2: RJ45; Rated Voltage: 230 V; Shielding: YES; No. of Conductors: 8;
RJFSFTP5E1400
CABLE ASSEMBLY; Connector Side-1: RJ45; Connector Side-2: RJ45; Rated Voltage: 230 V; Shielding: YES; Application: BATTELFIELD COMMUNICATION, CNC MACHINES;
RJFSFTP5E1525
CABLE ASSEMBLY; Connector Side-1: RJ45; Connector Side-2: RJ45; Rated Voltage: 230 V; Shielding: YES; Cross Section Area: .25 mm2;
RJFSFTP5E2287
CABLE ASSEMBLY; Connector Side-1: RJ45; Connector Side-2: RJ45; Rated Voltage: 230 V; Shielding: YES; MIL Conformity: NO;
RJFSFTP5E3050
RJFSFTP5E4575
CABLE ASSEMBLY; Connector Side-1: RJ45 PLUG; Connector Side-2: RJ45 PLUG; Rated Voltage: 230 V; Shielding: YES; Wire Gauge (AWG): 24;
RJFSFTP5E6100
CABLE ASSEMBLY; Connector Side-1: RJ45; Connector Side-2: RJ45; Rated Voltage: 230 V; Shielding: YES; Conductor Material: TINNED COPPER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved