Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY; Connector Side-1: RJ45; Connector Side-2: RJ45; Shielding: NO; DIN Conformity: NO; Wire & Cable Name: COMMUNICATION CABLE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Gateway Technologies
1+ parts
$2.000
100+ parts
1k+ parts
$1.780
10k+ parts
Singapore Electronics
$2.200
$2.046
$1.958
$1.870
Electrical Wires & Cables RJF5442S203100BTX attributes and parameters. Explore more Electrical Wires & Cables devices from Amphenol
Approvals (V):
Connector Side-1:
Connector Side-2:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shielding:
Wire & Cable Name:
RJF5442S203100BTX Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Zowie Technology
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
ROHM
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
1165940002
Weidmueller & Kg
CABLE ASSEMBLY;
CW4155-000
TE Connectivity
TE Connectivity CW4155-000 is a 600V rated cable with TIN finish, COPPER ALLOY conductor, and -65 to 200°C operating temperature range. Ideal for FLEXIBLE CORD AND FIXTURE WIRE applications requiring up to 0 AWG wire size in SPEC 55 cables.
55A0111-22-97
TE Connectivity's 55A0111-22-97 cable is a stranded wire with tin finish, rated at 600V. With a conductor made of copper alloy and 19X34 stranding, it operates b/w -65 to 150 °C. Ideal for general purpose applications, this flexible cord has a diameter of 1.09mm and is suitable for lightweight use.
IDSD-20-D-06.00-R
Samtec
IDSD-20-D-06.00-R by Samtec is a UL approved stranded flat cable with 40 conductors made of tin-coated copper alloy. It has a rated voltage of 425V, rated current of 3.4A, and can operate b/w -20°C to 105°C. Ideal for applications requiring reliable electrical connections in various industries.
22759/43-16-9
TE Connectivity's 22759/43-16-9 cable is a flexible cord with 600V rating, silver finish conductor, and copper alloy material. With -65 to 200 °C operating range, it suits MIL-DTL-22759 applications requiring 16 AWG wire gauge for various electrical connections.
55A0111-14-2
TE Connectivity's 55A0111-14-2 is a 600V rated wire with TIN finish, ideal for applications requiring flexibility. Featuring 14 AWG copper alloy conductor, it operates b/w -65 to 150°C temperatures. Suitable for SPEC 55 cable types, this wire is commonly used in electrical installations.
CTL3VGA-250
Infinite Electronics International
Wires and Cables;
5304FE0081000
Belden
WIRE AND CABLE;
5010/25CSL005
Alpha Wire
The Alpha Wire 5010/25CSL005 is a stranded wire with PVC jacket, rated for 300V. Featuring 25 conductors of copper alloy, it has a temperature range of -35 to 105°C. Ideal for flexible cord and fixture wire applications, approved by CE, CSA, IEC, and UL.
M27500-24SD3T23
TE Connectivity's M27500-24SD3T23 is a 600V cable with TIN finish, suitable for temperatures ranging from -65°C to 150°C. Featuring a copper alloy conductor and 24 AWG wire gauge, it is ideal for applications requiring MIL-DTL-27500 cables such as flexible cord and fixture wiring.
FFSD-05-D-02.50-01-N
Samtec's FFSD-05-D-02.50-01-N is a UL approved flat cable with 10 conductors, TIN finish, and PVC insulation. Featuring 30 AWG wire gauge, it has a cross section area of 0.051 mm2 and can handle up to 2.3A current. Ideal for applications requiring a temperature range from -40°C to 105°C.
44A0111-20-9
TE Connectivity's 44A0111-20-9 cable features stranded construction, rated for 600V with TIN finish. Ideal for general purpose applications, it has a temperature range of -65 to 150°C and a conductor material of copper alloy. With a wire gauge of 20 AWG and diameter of 1.4mm, it is suitable for flexible cord and fixture wire needs.
TC2050-IDC-NL
Tag-connect
CABLE ASSEMBLY; Connector Side-1: IDC; Connector Side-2: TAG-CONNECT; Shielding: NO; Additional Features: PLUG-OF-NAILS;
FZTSLXNXNSNM015
Panduit
Panduit FZTSLXNXNSNM015 is a 12-conductor communication cable with LC cassette connectors on both sides. It has ISO/IEC, TIA, and TIA/EIA approvals for SAN applications. With a diameter of 10mm, it operates b/w -20°C to 70°C temperature range.
M22759/34-22-9
TE Connectivity's M22759/34-22-9 is a 600V rated wire with TIN finish, ideal for applications requiring flexibility. With a temperature range of -65 to 150°C, this copper alloy conductor wire in 22 AWG size is suitable for MIL-DTL-22759 cables and fixtures.
45-389
Gc Electronics
CABLE ASSEMBLY; Connector Side-1: DB9 FEMALE; Connector Side-2: DB9 FEMALE; Shielding: NO; No. of Conductors: 7; Wire Gauge (AWG): 28;
36212
Lindy International
The Lindy International 36212 cable features UL approval, PVC jacket, and copper conductor. With DVI-D male to female connectors, it is ideal for electrical connections requiring shielding. Operating temperatures range from -20°C to 80°C with a wire gauge of 28 AWG and diameter of 8.6 mm.
88732-8602
Molex
Molex 88732-8602 is a shielded cable with 28 AWG wire gauge, rated for 30V and 1A current. It features USB A 2.0 MALE to USB MINI-B MALE connectors, ideal for data transfer applications requiring reliable signal transmission over short distances.
318090-002
TE Connectivity's 318090-002 is a 16 AWG electrical wire with TIN finish, rated for 600V and -65 to 150°C operating temperatures. Ideal for FLEXIBLE CORD AND FIXTURE WIRE applications like SPEC 55 cables.
3051/1OR005
Alpha Wire's 3051/1OR005 is a solid construction electrical wire with a rated voltage of 300V. It features a tin conductor finish and polyvinylchloride insulator material, making it suitable for use as flexible cord and fixture wire in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Amphenol
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved