Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol PT06SE-10-6S470 is a MIL-Spec Circular Connector with Neoprene Rubber insulator, operating temperature range of -55 to 125°C, and black zinc cobalt shell finish. It features 6 contacts, bayonet coupling type, and is corrosion, environment, and moisture resistant. Ideal for cable mounting applications requiring a female crimp termination plug connector.
Median Price
$48.170
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$27.460
100+ parts
-
1k+ parts
10k+ parts
Interstate Connecting
$33.583
$27.602
Heilind Electronics
$34.785
$28.590
Verical
$36.815
Newark
$45.460
$40.540
PEI Genesis
$32.960
RS Americas
$59.120
$45.520
Mouser Electronics
$60.480
$43.660
Powell Electronics
$64.230
$38.530
Farnell
$65.980
DigiKey
$66.527
Nova Conductors
$45.680
DigiKey Marketplace
$51.370
$30.820
Vyrian
EMSNET
Aztec Data Supply Inc.
$3.819
Corohmni
$8.003
AZTECH Wire
$15.482
Ampacity Inc.
$28.710
Aranea Global
$44.766
$42.976
Gateway Technologies
$40.655
Continental Prestige Electronics
Singapore Electronics
$50.248
$46.730
$44.720
$42.710
Allen Electronics Distributors
$55.140
$43.150
Argo Parts USA
Perfect Parts
This product meets military standards, ensuring high quality and reliability in demanding environments.
Bayonet coupling provides quick and secure connection, ideal for applications where frequent mating and unmating is required.
Neoprene rubber offers excellent electrical insulation and resistance to harsh conditions, making this connector durable and long-lasting.
With a high maximum operating temperature, this connector can withstand elevated temperatures without compromising performance.
The straight plug design allows for easy installation and connection in tight spaces, making it versatile for various applications.
The low minimum operating temperature ensures this connector can function reliably in cold environments without any issues.
The black zinc cobalt shell finish provides corrosion resistance, enhancing the durability and longevity of the connector.
Being a MIL series connector, it is designed to meet rigorous military specifications, guaranteeing high performance and reliability.
With a total of 6 contacts, this connector allows for multiple connections, making it suitable for complex electrical systems.
The solid backshell design provides strain relief and protection for the cable connections, ensuring secure and reliable performance.
The unique insert number indicates the specific configuration of the contacts, allowing for easy identification and compatibility.
These environmental characteristics make this connector suitable for use in a wide range of challenging environments, ensuring reliable performance under various conditions.
The cable mounting type offers flexibility and ease of installation, making it suitable for a variety of applications with different cable types.
The aluminum alloy shell material provides a lightweight yet durable construction, enhancing the overall reliability and longevity of the connector.
With contact sizes of 20, this connector can accommodate a wide range of wire sizes, making it versatile for different applications.
Having 6 contacts allows for multiple connections, enabling the connector to handle complex electrical systems with ease.
The crimp termination type offers a reliable and secure connection method, ensuring optimal electrical performance without the risk of loose connections.
The female contact gender designates the specific mating side of the connector, allowing for compatibility with corresponding male connectors.
The plug shell style is ideal for applications where quick and easy connection is required, providing convenience and efficiency.
The shell size of 10 indicates the physical dimensions of the connector, ensuring compatibility with other components in the system.
MIL-Spec Circular Connectors PT06SE-10-6S470 attributes and parameters. Explore more MIL-Spec Circular Connectors devices from Amphenol
Additional Features:
Backshell Type:
Body or Shell Style:
Connector Type:
Contact Gender:
Contact Quantities:
Contact Sizes:
Coupling Type:
DIN Conformance:
Rotation Degrees:
Description:
Empty Shell:
Environmental Characteristics:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization:
Shell Finish:
Shell Material:
Shell Size:
Termination Type:
Total No. of Contacts:
Unique Insert No.:
PT06SE-10-6S470 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Frontier Electronics
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
ERJ3EKF1002V
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
D38999/20WA35PN-LC
Esterline Technologies
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Backshell Type: SOLID; Body or Shell Style: RECEPTACLE; Empty Shell: YES;
D38999/26FJ35PN-L/C
TE Connectivity
TE Connectivity's D38999/26FJ35PN-L/C is a MIL-Spec Circular Connector with EMI shielding, threaded coupling, and 128 contacts. With a temperature range of -65 to 200°C, it is ideal for applications requiring corrosion resistance and fluid protection in environments where crimp termination is needed.
D38999/26WC4SN
TE Connectivity's D38999/26WC4SN is a MIL-Spec Circular Connector with 1" max plug diameter, gold termination finish, and threaded coupling. Ideal for applications requiring EMI shielding, it has 4 contacts rated at 13A, solder termination, and aluminum alloy shell material. Operating from -65 to 200°C, it offers corrosion resistance and is suitable for panel mounting.
D38999/26FE35SN
Corsair Electrical Connectors
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Contact Sizes: 22D; Body or Shell Style: PLUG;
D38999/26WG35SN
Souriau-sunbank Connection Technologies
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Shell Size: G; Shell Finish: CADMIUM PLATED;
D3899920WB35SN
Tt Electronics Plc
D3899920WB35SN by Tt Electronics Plc is a MIL-Spec Circular Connector with GOLD OVER NICKEL termination. With THREADED coupling, it operates b/w -65°C to 175°C. Ideal for environments requiring resistance to fire, fluid, and moisture, this connector has 13 contacts in an ALUMINUM ALLOY shell suitable for cable and panel mounting.
D38999/20WE35SN
Aero-electric Connector
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; DIN Conformance: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
D38999/20W-B-35PN
Hi Rel Connectors
D38999/20W-B-35PN by Hi Rel Connectors is a MIL-Spec Circular Connector with threaded coupling. It has 13 contacts, shell made of aluminum alloy, and operates b/w -65°C to 175°C. Ideal for applications requiring corrosion, environment, and fluid resistance in cable and panel mounting setups.
D38999/26WC98SN
Itt Cannon
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Finish: CADMIUM; Environmental Characteristics: CORROSION/ENVIRONMENT/FLUID/VIBRATION RESISTANT; Termination Type: SOLDER;
D38999/26WE35SN
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 55; Coupling Type: THREADED; Mixed Contacts: NO;
D38999/26F-C-35PN
D38999/26F-C-35PN by Hi Rel Connectors is a MIL-Spec Circular Connector with threaded coupling, operating from -65 to 200°C. Featuring 22 contacts, aluminum alloy shell, and solder termination, it's ideal for environment and fluid-resistant applications in cable mounting setups.
D38999/26WB35SA
Glenair
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -65 Cel; Polarization: A; Body or Shell Style: PLUG;
D38999/26WB98SN
Amphenol
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Finish: CADMIUM; DIN Conformance: NO; Shell Size: B;
D38999/26WJ35SN
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 175; Polarization: N; Mixed Contacts: NO;
D38999/26WA98PN
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -65 Cel; Total No. of Contacts: 3; Shell Size: A;
D38999/24WC35SN-LC
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -65 Cel; Coupling Type: THREADED; Additional Features: STANDARD: MIL-DTL-38999, COMPATIBLE CONTACT: M39029/56 348;
D38999/26FA35PN
Souriau
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 6; Unique Insert No.: A35; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
D38999/26WD35SN
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Size: D; Unique Insert No.: D35; Contact Quantities: 37;
Defense Logistics Agency
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; National Stock Number (NSN): 5935013580836; Connector Back Interface: MIL-C-38999 Ser III,IV; Total No. of Contacts: 4;
D38999/20WB35SN
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Shell Size: B; Polarization: N;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PT06A-10-6S(SR)
The Amphenol PT06A-10-6S(SR) is a MIL-Spec Circular Connector with gold termination contact finish, neoprene rubber insulator, and bayonet coupling type. It operates b/w -55°C to 125°C, making it suitable for environments requiring corrosion, moisture, and environmental resistance. Ideal for cable mounting applications needing a female solder contact gender in an aluminum alloy shell.
PT06A-10-6P(SR)
MIL SERIES CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Mounting Type: CABLE; Unique Insert No.: 10-6;
PT06W-10-6S
PT06W-10-6S by Amphenol is a MIL-Spec Circular Connector with 6 contacts. It has a bayonet coupling type and a cadmium shell finish, making it corrosion, environment, and moisture resistant. This connector is commonly used in cable mounting applications due to its solid backshell and solder termination.
PT06A-10-6S
MIL SERIES CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -55 Cel; Description: STRAIGHT PLUG; Contact Sizes: 20;
PT06A-12-4PSR
MIL SERIES CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: STANDARD: MIL-DTL-26482; Environmental Characteristics: CORROSION RESISTANT; ENVIRONMENT RESISTANT; MOISTURE RESISTANT; DIN Conformance: NO;
PT06A-10-6S023
MIL SERIES CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Mounting Type: CABLE; Mixed Contacts: NO;
PT06A-10-6S470
Amphenol PT06A-10-6S470 is a MIL-Spec Circular Connector with gold termination, neoprene insulator, and bayonet coupling. It operates b/w -55°C to 125°C, ideal for corrosion-resistant cable mounting applications in harsh environments.
PT06E-10-6SSR
Amphenol PT06E-10-6SSR is a MIL-Spec Circular Connector with 6 contacts, Neoprene Rubber insulator, and Bayonet coupling. It operates b/w -55°C to 125°C, suitable for corrosion-resistant cable mounting applications in harsh environments.
PT06SE-10-6PSR
The Amphenol PT06SE-10-6PSR is a MIL-Spec Circular Connector with neoprene rubber insulator, bayonet coupling, and cadmium shell finish. It has 6 contacts, operates b/w -55°C to 125°C, and is corrosion, environment, and moisture resistant. Ideal for cable mounting applications requiring a male crimp termination plug with aluminum alloy shell.
PT06A-10-6S(476)
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Sizes: 20; Insulator Material: NEOPRENE; Polarization: N;
PT06A-12-10PSR
MIL SERIES CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; DIN Conformance: NO; Shell Size: 12;
PT06E-12-3P023
MIL SERIES CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: NEOPRENE RUBBER; Contact Quantities: 3; Environmental Characteristics: CORROSION RESISTANT; ENVIRONMENT RESISTANT; MOISTURE RESISTANT;
PT06E-12-3P470
Amphenol PT06E-12-3P470 is a MIL-Spec Circular Connector with 3 contacts, gold termination contact finish, and neoprene rubber insulator material. It has a max operating temperature of 125°C and is suitable for applications requiring corrosion, environment, and moisture resistance.
PT06E-12-3P424
MIL SERIES CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: STANDARD: MIL-DTL-26482; Mounting Type: CABLE; Mixed Contacts: NO;
PT06A-10-6P
MIL SERIES CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Backshell Type: SOLID; Description: STRAIGHT PLUG; Polarization: N;
PT06E-12-3P(476)
MIL SERIES CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Unique Insert No.: 12-3; Coupling Type: BAYONET;
PT06E-12-3P025
MIL SERIES CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Material: ALUMINUM ALLOY; Empty Shell: NO; Mounting Type: CABLE;
PT06SE-10-6SSR
PT06SE-10-6SSR by Amphenol is a MIL-Spec Circular Connector with a bayonet coupling type and neoprene rubber insulator material. It has a max operating temperature of 125°C and is corrosion, environment, and moisture resistant. This straight plug connector has 6 contacts, uses crimp termination, and is suitable for cable mounting applications.
PT06A-10-6P005
MIL SERIES CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Environmental Characteristics: CORROSION RESISTANT; ENVIRONMENT RESISTANT; MOISTURE RESISTANT; Mixed Contacts: NO;
PT06A-20-16SSR
MIL SERIES CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Quantities: 16; Termination Type: SOLDER; Insulator Material: NEOPRENE RUBBER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved