Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Gateway Technologies
1+ parts
$0.010
100+ parts
1k+ parts
$0.008
10k+ parts
Variable Resistors PT-6KH-103A2020-P05-03AZ attributes and parameters. Explore more Variable Resistors devices from Amphenol
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Technology:
Terminal Shape:
Tolerance:
PT-6KH-103A2020-P05-03AZ Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Philips Components
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
Lite-on Semiconductor
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
STMicroelectronics
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
252A103A60NB
Cts
The Cts 252A103A60NB is a linear potentiometer with 10000 ohm resistance, suitable for applications requiring precise voltage control. Featuring a vertical actuator and rectangular package, it has 6 wire terminals and operates b/w -10°C to 85°C. With a tolerance of 10%, this through-hole mount device has a rated power dissipation of 0.0125 W, making it ideal for joystick-type controls.
25VR100LF
Tt Electronics Plc
25VR100LF by Tt Electronics Plc is a CERMET variable resistor with 100 ohm resistance, linear law, and 10% tolerance. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.5 W. Ideal for PCB mounting in applications requiring precise resistance adjustments.
3299X-1-201LF
Bourns
Bourns 3299X-1-201LF is a CERMET trimmer pot with 200 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.5 W. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
7286R20KL.25
7286R20KL.25 by Tt Electronics Plc is a 10-turn linear wire wound potentiometer with 20000 ohm resistance, suitable for panel mount applications. With a rated power dissipation of 2W and operating temperature range from -55 to 125 °C, it offers precise control in various electronic circuits. Its circular package design and gold terminal finish make it ideal for industrial equipment requiring accurate resistance adjustments.
SM-42TW103
Nidec Copal Electronics
The Nidec Copal Electronics SM-42TW103 is a 10000 ohm linear trimmer resistor with 11 turns and CERMET technology. It operates b/w -65 to 150 °C, suitable for applications requiring precise resistance adjustments in compact SMT packages. With a tolerance of 10%, it offers a rated power dissipation of 0.25 W at an operating voltage of 50 V.
3224X-1-204E
Bourns 3224X-1-204E is a linear trimmer pot with 12 turns and resistance of 200k ohm. It has a temperature coefficient of 100 ppm/°C and operates b/w -65 to 150 °C. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
PS30-20PB1BR10K
PS30-20PB1BR10K by Tt Electronics Plc is a linear conductive plastic potentiometer with 10000 ohm resistance, 20% tolerance, and 0.1 W power dissipation. It features a slide actuator, vertical orientation, and through-hole mounting. Ideal for PCB applications requiring precise resistance adjustments in compact spaces.
3862C-206-104AL
Bourns 3862C-206-104AL is a linear potentiometer with 100k ohm resistance, 10% tolerance, and 1W power dissipation. It has a circular package, panel mount style, and operates b/w -40 to 125 °C. Ideal for applications requiring precise resistance adjustment in electronic circuits.
PDA241-SRT02-503B0
Bourns PDA241-SRT02-503B0 is a 50000 ohm POTENTIOMETER with 15% Tolerance, suitable for Panel Mount applications. Featuring a max operating temperature of 70 °C and rated power dissipation of 0.5 W, it is ideal for precise resistance adjustments in various electronic devices.
3549S-1AA-201A
Bourns 3549S-1AA-201A is a 200 ohm, 10-turn linear wirewound potentiometer with 3% tolerance. It has a rated power dissipation of 2W and operates b/w -40°C to 125°C. Ideal for panel mount applications requiring precise resistance adjustments in a compact circular package.
3057Y-1-103
Bourns 3057Y-1-103 is a 10000 ohm linear potentiometer with 22 turns, rated for temperatures from -55 to 150 °C. Its wire wound technology and gold over nickel finish make it ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
91A1A-B28-B13L
Bourns 91A1A-B28-B13L is a linear conductive plastic potentiometer with 5000 ohm resistance, suitable for panel mount applications. It has a rated power dissipation of 1W, operates b/w -40 to 125°C temperatures, and offers a tolerance of 20%. Ideal for precise control in various electronic devices.
PS6KV50-103A3030I-PM
Amphenol
PS6KV50-103A3030I-PM by Amphenol is a linear carbon variable resistor with 1 turn and a resistance of 10000 ohm. It has a rated temperature of 50 °C and is commonly used in surface mount applications.
TC33X-2-503E
Bourns TC33X-2-503E is a linear trimmer resistor with 50000 ohm resistance, 25% tolerance, and 270° rotation angle. It operates b/w -40 to 100 °C and has a rated power dissipation of 0.15 W. Ideal for surface mount applications in various electronic circuits requiring precise resistance adjustments.
3386P-1-105LF
Bourns 3386P-1-105LF is a CERMET trimmer resistor with 1000000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its linear resistance law and wide operating temperature range (-55 to 125 °C).
RK2711120026
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
22AR100KLFTR
22AR100KLFTR by Tt Electronics Plc is a 100000 ohm linear trimmer resistor with CERMET technology. It has an operating voltage of 200V, rated power dissipation of 0.125W, and temperature coefficient of 100 ppm/°C. Ideal for surface mount applications in electronic circuits requiring precise resistance adjustments.
TC33X-2-104E
Bourns TC33X-2-104E is a linear trimmer resistor with 100k ohm resistance, 25% tolerance, and 0.15W power dissipation. It operates b/w -40 to 100°C, suitable for applications requiring precise resistance adjustments in compact SMT designs at up to 50V voltage.
53C350
Honeywell Sensing And Control
The Honeywell Sensing And Control 53C350 is a circular package potentiometer with a linear resistance of 50 ohm. It has a max operating temperature of 120°C and is suitable for panel mounting applications.
3296Y-1-203LF
Bourns 3296Y-1-203LF is a 20000 ohm, 25-turn linear cermet trimmer resistor with 10% tolerance. Operating voltage of 300V and rated power dissipation of 0.5W make it suitable for precise circuit adjustments in various electronic applications. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 to 125 °C effectively.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved