Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CIRCULAR CONNECTOR; Manufacturer Series: MSAS;
Median Price
$10.066
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$10.420
100+ parts
$7.970
1k+ parts
$6.780
10k+ parts
-
DigiKey
$11.040
$7.977
$6.782
TTI Europe
$6.173
$4.965
Master Electronics
$7.540
$6.610
$6.580
Verical
Nova Conductors
$6.430
TME
$8.970
$7.470
Vyrian
Ampacity Inc.
$5.250
Continental Prestige Electronics
$6.301
Netroflash
$6.108
$5.980
Gateway Technologies
$5.722
Singapore Electronics
$7.072
$6.576
$6.294
$6.011
Argo Parts USA
Other Function Circular Connectors MSAS-08PFFP-SF8001 attributes and parameters. Explore more Other Function Circular Connectors devices from Amphenol
Connector Type:
Manufacturer Series:
MSAS-08PFFP-SF8001 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
ROHM
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
T4111011051-000
TE Connectivity's T4111011051-000 is a threaded circular connector with EMI shielding, rated for 60V and 4A signal current. With nickel finish, brass shell material, and male contact gender, it has 5 contacts in a plug body style. Ideal for applications requiring durability up to 100 cycles at temperatures ranging from -40°C to 85°C.
1200060018
Molex
Other Circular Connectors; Contact Material: NOT APPLICABLE; Mating Contact Finish: NOT APPLICABLE;
SLPPB35BSB1
Amphenol
The Amphenol SLPPB35BSB1 is a circular connector with SNAP coupling, suitable for temperatures ranging from -40°C to 125°C. Featuring a solid backshell and crimp termination, it is UL certified and designed for environment-resistant applications in cable mounting setups.
NC3MXX-BAG
Neutrik Ag
Neutrik Ag's NC3MXX-BAG is a circular connector with snap coupling, polyamide66 insulator, and zinc alloy shell. It operates b/w -30°C to 80°C, suitable for environment-resistant applications. With 3 male contacts, it is ideal for cable mounting in various industries meeting IEC and UL standards.
866182-1
TE Connectivity's 866182-1 is a threaded circular connector with 7 contacts, solid backshell, and hermetic option. It conforms to MIL standards and features female solder termination. Ideal for panel mounting applications in military and aerospace industries.
1432363
Phoenix Contact
1432363 by Phoenix Contact is a SNAP circular connector with 5 contacts, IEC conformity, and FEMALE contact gender. It is used for BOARD mounting with SOLDER termination in various applications requiring CIRCULAR CONNECTOR technology.
34123
Woodhead Industries
CIRCULAR CONNECTOR; DIN Conformance: NO; IEC Conformity: NO; Manufacturer Series: 34123; MIL Conformity: NO;
2221612-1
TE Connectivity 2221612-1 is a circular connector with 10 contacts, male gender, and shell size of 3. It operates b/w -55°C to 125°C, suitable for applications requiring a mains connector rating of 115/230VAC. The plug-style connector features a copper alloy shell and round pin/socket contact style.
6282-4PG-315
Switchcraft
The Switchcraft 6282-4PG-315 is a SNAP coupling type circular connector with a NYLON insulator material. It has a max operating temperature of 115°C and is corrosion resistant. This connector is commonly used in cable applications and has 4 contacts for solder termination.
T3202000U
CIRCULAR CONNECTOR;
2915
Belden
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Gold (Au); Contact Material: COPPER ALLOY; JESD-609 Code: e4;
HR10A-10R-12P(74)
Hirose Electric
HR10A-10R-12P(74) by Hirose Electric is a circular connector with 12 contacts, gold contact finish, and snap coupling type. Ideal for panel mounting applications, it features a nickel-plated shell made of zinc alloy and brass. Termination is solder-based, suitable for male connectors in receptacle style shells.
C09131C0051002
Amphenol C09131C0051002 is a threaded circular connector with nickel shell finish. It has 5 contacts and solid backshell, suitable for panel mounting. This male receptacle connector is commonly used in various applications requiring solder termination.
T4140012041-000
TE Connectivity T4140012041-000 is a circular connector with 4 male contacts, rated at 250V and 4A. It has a shell made of brass, nickel finish, and operates b/w -40 to 85°C. Ideal for board mounting applications requiring polarized connectors with solder termination.
HD34-18-14PN-059
TE Connectivity's HD34-18-14PN-059 is a circular connector with 14 contacts, rated at 250V and 13A. With a body size of 3.217" x 1.75" x 1.625", it is ideal for applications requiring a polarized, solid backshell receptacle connector with aluminum alloy shell material.
HD36-24-31ST-B019
TE Connectivity's HD36-24-31ST-B019 circular connector features 31 contacts, rated at 13A and 250V. With a body size of 1.52" x 1.942" x 1.942", it is ideal for applications requiring a polarized male plug with solid backshell, aluminum alloy shell material, and operating temperatures from -55°C to 125°C.
1200060649
CIRCULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
LF07WBP-6P
LF07WBP-6P by Hirose Electric is a threaded circular connector with 6 contacts, waterproof option, and nickel shell finish. It is suitable for cable mounting applications requiring a male crimp termination in a zinc alloy plug shell size 7.
FGG.1B.310.CLAD62Z
Lemo Usa
FGG.1B.310.CLAD62Z by Lemo Usa is a circular connector with 0.47" body diameter and 10 contacts, suitable for cable mounting applications. It features a chrome plated brass shell, SNAP coupling type, and can operate in temperatures ranging from -55 to 250°C. Ideal for environments requiring corrosion/moisture resistance, it uses solder termination and mates with EGG.1B.310.CLL and PHG.1B.310.CLLD62Z connectors conforming to UL standards.
HDP24-24-31PT
TE Connectivity's HDP24-24-31PT is a circular connector with 31 contacts, rated at 250V and 13A. Featuring a snap coupling type, GLASS FILLED POLYAMIDE insulator material, and UL flammability code of 94V-0, it is ideal for applications requiring a polarized male connector with solid backshell for panel mounting in temperatures ranging from -55 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MSAS-04PMMP-SF8002
MSAS-04PFFT-EE8001
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SURFACE MOUNT; Body Diameter: .323 inch; Backshell Type: SOLID;
MSAS-05PFFP-SF8001
MSAS-08PMMR-SF7003
MSAS-08PFFP-SF8002
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved