Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CARD EDGE CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 300VAC; No. of Connectors: ONE; Contact Resistance: 55 mohm; Body Length: .866 inch;
Median Price
$1.915
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.460
100+ parts
$1.051
1k+ parts
$1.000
10k+ parts
-
Farnell
$1.550
$0.992
$0.895
Interstate Connecting
$1.765
$1.525
Heilind Electronics
Mouser Electronics
$2.110
$1.530
$1.220
$1.170
DigiKey
$2.170
$1.567
$1.353
$1.150
Arrow
$2.196
$1.453
$1.243
Newark
$3.290
$2.750
$2.260
Element14
$139.530
$101.350
$96.940
Future Electronics
$0.945
Verical
$1.437
$1.152
$1.058
NAC Semi
$1.730
IBS Electronics
$1.837
$1.374
Gateway Technologies
$4.000
$3.560
Singapore Electronics
$4.400
$4.092
$3.916
$3.740
Perfect Parts
GreenTree Electronics
$1.299
Headers & Edge Type Connectors MDT-420-E-03-001 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Amphenol
Board Mounting Option:
Body Length:
Connector Type:
Mating Contact Finish:
Contact Material:
Contact Pattern:
Contact Resistance:
Dielectric Withstanding Voltage (V):
Insulation Resistance:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mating Contact Pitch (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
MDT-420-E-03-001 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
1N4148WT
Good-ark Electronics
Temic Semiconductors
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
FH12A-40S-0.5SH(55)
Hirose Electric
FH12A-40S-0.5SH(55) by Hirose Electric is a FFC/FPC connector with 40 contacts, gold termination finish, and 500M ohm insulation resistance. It operates b/w -40 to 85°C, has a mating pitch of 0.02", and is used in board mounting applications requiring high durability and reliability.
SM02B-GHS-TB(LF)(SN)
J S T Mfg
SM02B-GHS-TB(LF)(SN) by J S T Mfg is a 5.75" BOARD CONNECTOR with 0.049" pitch, ideal for PCBs. Features include 100000000 ohm insulation resistance, 500VAC dielectric voltage, and -25 to 85 °C operating range. Perfect for applications requiring male connectors with right angle mounting and surface mount termination.
TSW-102-07-L-S
Samtec
Samtec's TSW-102-07-L-S is a 2-contact board connector with a 0.1" pitch, ideal for commercial applications. Featuring matte tin over nickel termination, gold mating finish, and phosphor bronze contacts, it operates b/w -55°C to 125°C. With UL certification and a 94V-0 flammability rating, this male connector offers reliable performance in various electronic devices.
TFSD-20-28C-H-34.00-S
Samtec's TFSD-20-28C-H-34.00-S is a 2-row, 40-contact board connector with female contacts for cable mounting. It features crimp termination and socket body style, ideal for high-density applications in electronics and telecommunications industries.
20021121-00010C4LF
Amphenol Communications Solutions
Amphenol Communications Solutions' 20021121-00010C4LF is a board connector with a mating contact pitch of 0.05 inch and insulation resistance of 100MΩ. It is commonly used in commercial applications, offering durability with 100 cycles and a max operating temperature of 105°C.
DF40C-100DS-0.4V(58)
DF40C-100DS-0.4V(58) by Hirose Electric is a 2-row, 100-contact board stacking connector with gold termination finish. Featuring liquid crystal polymer insulator, it offers 50000000 ohm insulation resistance and 100VAC dielectric voltage. Ideal for commercial applications requiring signal current of 0.3A, operating b/w -35 to 85°C temperature range.
43025-0800
Molex
The Molex 43025-0800 is a board connector with 8 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.506", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a reliable female connector with crimp termination and UL94V-0 flammability rating.
VHR-5N-BK
VHR-5N-BK by J S T Mfg is a 5-contact female board connector with a mating contact pitch of 0.156". Featuring POLYAMIDE insulation, it has an operating temperature range of -25 to 85 °C and offers high insulation resistance at 1G ohm. Ideal for commercial applications requiring reliable connections in black housings.
DF13-2S-1.25C
DF13-2S-1.25C by Hirose Electric is a 2-contact board connector with 0.049" pitch, rated at 1A signal current. Featuring polyamide insulation and beige color, it withstands up to 500VAC voltage and operates b/w -35°C to 85°C. Ideal for commercial applications requiring durability, it uses crimp termination and offers a min withdrawal force of 0.3N.
103948-9
TE Connectivity
TE Connectivity 103948-9 is a board connector with 10 contacts, 0.1" pitch, and 3A signal rating. It features POLYETHYLENE insulation, tin/lead finish, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable male connectors with latching mounting options.
B8B-XH-A(LF)(SN)
B8B-XH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 8 contacts, 0.098" pitch, and 1000VAC dielectric voltage. It features POLYAMIDE66 insulation, BRASS contact material, and operates b/w -25 to 85 °C. Ideal for applications requiring a male SQ PIN-SKT contact style with solder termination.
DT06-3S-P006
TE Connectivity's DT06-3S-P006 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and measures 1.228" x 0.737" x 0.94".
1565917-4
TE Connectivity 1565917-4 is a Card Edge Connector with 200 contacts, gold finish, and polyethylene insulator. It has a mating contact pitch of 0.024", suitable for board mounting with right-angle style. Operating temperature ranges from -55 to 85°C, making it ideal for various electronic applications.
5011902017
The Molex 5011902017 is a BOARD CONNECTOR with 20 contacts, gold termination finish, and 0.039" contact pitch. It has a dielectric voltage of 350VAC and operates b/w -40 to 105°C. Ideal for applications requiring durable, male connectors with surface mount termination in commercial settings.
45108-010030
3m Electronic Products Division
The 3M Electronic Products Division's 45108-010030 is a board connector with a mating contact pitch of 0.05", insulation resistance of 1G ohm, and dielectric voltage rating of 1250VAC. It has female contacts, operates b/w -65 to 125°C, and is suitable for commercial applications requiring reliable signal currents up to 2.5A.
PAP-06V-S
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
B5B-PH-SM4-TB(LF)(SN)
B5B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, suitable for applications requiring 2A signal current. Features include POLYAMIDE66 insulator, 800VAC dielectric voltage, and TIN (Sn) finish over COPPER contacts. Ideal for PCB mounting with RECTANGULAR contact pattern and WHITE insulator color.
307-074-422-212
Edac
Edac 307-074-422-212 is a CARD EDGE CONNECTOR with 74 contacts, 5A signal current rating, and 2545VAC dielectric voltage. It has a 0.156" pitch for PCB mating and operates b/w -40 to 105°C. Ideal for board and panel mounting applications requiring high insulation resistance.
ADM6-60-01.5-L-4-2-A
BOARD STACKING CONNECTOR; Termination Contact Finish: MATTE TIN OVER NICKEL; JESD-609 Code: e3;
75869-104LF
75869-104LF by Amphenol is a 20-contact board connector with 0.1" pitch, suitable for commercial applications. It features 1414VAC dielectric voltage, -65 to 125°C operating temp range, and matte tin over nickel finish. Ideal for PCBs requiring reliable male connectors with rectangular contact pattern.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Amphenol
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved