Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; EMI Shielded: NO; Mounting Type: BOARD; Maximum Operating Temperature (Cel): 105;
Median Price
$149.405
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$108.810
100+ parts
$95.560
1k+ parts
-
10k+ parts
DigiKey
$190.000
$111.610
$104.030
Flame Enterprises (Authorized)
VNN
$27.275
Nova Conductors
$27.831
FDH Electronics
$96.524
$78.071
$72.724
Vyrian
Digiode
Kallista Electronics Ltd
ACDS - Activité Composants Distribution Service
Sunrise Surplus Inc.
Aztec Data Supply Inc.
$3.807
Semicontronic
$4.500
$4.388
$4.365
Corohmni
$5.926
Gateway Technologies
$24.769
Continental Prestige Electronics
Netroflash
Advanced Electronics
$28.388
Singapore Electronics
$30.614
$28.471
$27.246
$26.021
Ampacity Inc.
$77.800
Argo Parts USA
Corphita
Perfect Parts
Cyclops Electronics Ltd (Excess)
Rectangular Connectors M81714/2-DA1 attributes and parameters. Explore more Rectangular Connectors devices from Amphenol
Connector Type:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Rated Current - Signal:
Terminal Pitch (mm):
Total No. of Contacts:
M81714/2-DA1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Alpha & Omega Semiconductor
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
4554
Jw Miller Magnetics
Other Semiconductors;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM78L05ACMX/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
Eic Semiconductor
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Baneasa S A
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
5-2208684-3
TE Connectivity
TE Connectivity 5-2208684-3 is a rectangular connector with dimensions 4.744" x 1.811" x 1.732". Rated for 36V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -40°C to 120°C. Ideal for applications requiring a polarized, female receptacle with a rated current of 40A.
09120173101
Harting Electronics & Kg
09120173101 by Harting Electronics & Kg is a rectangular connector with dimensions of 1.638" x 0.882" x 1.445". Made of polycarbonate, it has 18 female contacts and meets CSA and DNVGL standards. Ideal for cable mounting applications in various industries.
1423827
Phoenix Contact
RECTANGULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
776273-5
TE Connectivity's 776273-5 is a rectangular connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has 3 rows, rated at 17A for signal current, and operates b/w -40 to 125°C. Ideal for cable mounting applications due to its female contact gender and polarized design.
14310413101000
14310413101000 by Harting Electronics & Kg is a rectangular connector with a mating contact pitch of 0.1". It features an insulation resistance of 1000000000 ohm and can operate in temperatures ranging from -40 to 125 °C. Ideal for commercial applications, this connector has a total of 4 contacts and is designed with a polarized housing for secure connections.
M81714/2-DC1
Dme Electronics
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: .85 inch; Additional Features: STANDARD: MIL-T-81714; Total No. of Contacts: 10;
RJFTV6G
Amphenol
RJFTV6G by Amphenol is a rectangular connector with 8 contacts, made of aluminum alloy. It has a body depth of 2.2" and operates b/w -40°C to 85°C. This male plug connector is UL certified and suitable for cable mounting applications.
1687820
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; JESD-609 Code: e4; DIN Conformance: NO; MIL Conformity: NO; IEC Conformity: NO;
09210153101
09210153101 by Harting Electronics & Kg is a rectangular connector with 16 contacts, made of polycarbonate material. It offers a dielectric voltage resistance of 4000VAC and insulation resistance of 10^10 ohm. Suitable for commercial applications, it has a temperature range from -40 to 125°C and features crimp termination for durability.
1604998
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; MIL Conformity: NO; Contact Material: COPPER ALLOY; DIN Conformance: NO; IEC Conformity: NO;
T2010042201-000
TE Connectivity's T2010042201-000 is a rectangular connector with 4 contacts, rated at 10A for signal current. It features screw termination and accommodates wire sizes from 20 AWG to 14 AWG. This connector is commonly used in applications requiring reliable female contact connections.
02P-MWPV-SSR
J S T Mfg
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; MIL Conformity: NO; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: MWP;
HJ-19PMFP-SC7001
RECTANGULAR CONNECTOR; Manufacturer Series: HJ-19PMFP-SC7001;
1607418
RECTANGULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1687817
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; Manufacturer Series: 1687817; JESD-609 Code: e4; MIL Conformity: NO; Contact Material: COPPER ALLOY;
1423962
RECTANGULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1809310
RECTANGULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1-1394416-1
TE Connectivity's 1-1394416-1 is a Rectangular Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It features 2 loaded rows, -40 to 120°C operating temperature range, and 10A signal current rating. Ideal for cable mounting applications requiring polarized female connectors.
1584392
TJT800100
RECTANGULAR CONNECTOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M81714/60-20-01
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; MIL Conformity: YES; DIN Conformance: NO; IEC Conformity: NO;
M81714/2-DA1
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Pitch (inch): 0.13; Additional Features: STANDARD: MIL-T-81714; No. of Rows Loaded: 2;
TE Connectivity's M81714/2-DA1 is a rectangular connector with 10 contacts, rated at 1.5A for signal current. It operates in temperatures ranging from -55 to 105°C and features a terminal pitch of 3.3mm. This connector is suitable for board mounting applications requiring a reliable and durable connection solution.
Defense Logistics Agency
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Terminal Pitch (mm): 3.3; Mixed Contacts: NO; IEC Conformity: NO;
M81714/2-DB1
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: PANEL; Body Length: .85 inch; Total No. of Contacts: 10;
TE Connectivity's M81714/2-DB1 is a rectangular connector with 10 contacts, rated at 1.5A for signal current. It has a mating contact pitch of 0.13" and operates in temperatures ranging from -55 to 105°C. Ideal for board mounting applications requiring a female plug connector meeting MIL standards.
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Body Width: .847 inch; Additional Features: REFERENCE STANDARD: MIL-T-81714;
M81714/60-16-03
M81714/60-22-01
M81714/60-20-02
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Total No. of Contacts: 12; Maximum Operating Temperature (Cel): 200; Empty Shell: YES;
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Filter Feature: NO; IEC Conformity: NO; No. of Ports: 1;
M81714/60-16-02
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; IEC Conformity: NO; MIL Conformity: YES; DIN Conformance: NO;
M81714/60-16-01
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mixed Contacts: NO; EMI Shielded: NO; Mains Connector Rating: 1.5A;
M81714/63-20F
OTHER RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; Empty Shell: YES; Filter Feature: NO; Maximum Operating Temperature (Cel): 200; Mains Connector Rating: 115/230VAC;
M81714/60-12-01
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; IEC Conformity: NO; DIN Conformance: NO; MIL Conformity: YES;
M81714/60-22-04
M81714/3-DD1
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-T-81714; Mounting Type: PANEL; No. of Rows Loaded: 2;
M81714/2-DC2
RECTANGULAR CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Terminal Pitch (mm): 3.3; MIL Conformity: NO; Mains Connector Rating: 1.5A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved