Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's M39012/55-4502 SSMA Connector features 0.11 dB Insertion Loss, MIL Conformity, and 50 ohm Impedance. Ideal for RF applications up to 12.4 GHz, this threaded connector with PTFE insulator is commonly used in cable installations for reliable signal transmission.
Median Price
$68.630
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$54.590
100+ parts
$43.990
1k+ parts
-
10k+ parts
AE Petsche
$59.150
Powell Electronics
$78.110
$69.430
TTI
$90.250
$67.210
$65.470
Verical
IBS Electronics
$70.616
$55.796
$55.510
Microwave Components, LLC
American Connector Supply Corp
Speed Components Ltd
Nova Conductors
Gateway Technologies
$6.000
$5.339
Singapore Electronics
$6.600
$6.137
$5.873
$5.609
Authorized Procurement Solutions
Netroflash
Low insertion loss ensures minimal signal loss during transmission, making this product ideal for high-frequency applications.
The MIL conformity ensures that this product meets military standards for reliability and performance, making it suitable for critical applications.
Threaded coupling provides a secure connection that is resistant to vibrations and environmental factors, making this product suitable for rugged environments.
The use of PTFE as insulator material ensures high dielectric strength and stability over a wide range of temperatures, making this product reliable in diverse operating conditions.
The RF SMA connector is a standard interface in RF applications, ensuring compatibility with a wide range of equipment and systems.
Cable mounting type allows for easy installation and maintenance, making this product convenient for use in various setups.
With a characteristic impedance of 50 ohm, this product is suitable for high-frequency signal transmission with minimal impedance mismatch.
Crimp termination provides a secure and reliable connection between the connector and the cable, ensuring consistent performance over time.
Male contact gender is common in RF applications and ensures compatibility with various female connectors, making this product versatile in use.
Plug body style allows for easy insertion and removal of the connector, making this product user-friendly and practical for frequent connections.
Straight mounting style simplifies the installation process and is suitable for applications where a straight-line connection is required.
With a maximum operating frequency of 12.4 GHz, this product is capable of handling high-frequency signals with precision and reliability.
SSMA Connectors M39012/55-4502 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
MIL Conformity:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
M39012/55-4502 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
International Semiconductor
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
EU2B-YS3303C
Idec
ROTARY SWITCH;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Rochester Electronics
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
132170-12N
Amphenol
RF SMA CONNECTOR;
901-144-8RFX
Amphenol 901-144-8RFX is an RF SMA connector with 50 ohm impedance, 0.13 dB insertion loss, and 18 GHz operating frequency. Ideal for commercial applications, it features gold-plated contacts, PTFE insulator, and brass shell for durability in high-temp environments.
2052-3123-00
M/a-com Technology Solutions
RF SMA CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Mating Contact Finish: GOLD OVER NICKEL; JESD-609 Code: e4; Body or Shell Style: RECEPTACLE;
73251-2123
Molex
Molex 73251-2123 is an RF SMA connector with gold shell finish, PTFE insulator, and brass shell material. It has a characteristic impedance of 50 ohm and is used in commercial applications for board mounting with surface mount termination.
132108RP
The Amphenol 132108RP is an RF SMA connector with a body depth of 0.31". It features a gold shell finish and PTFE insulator material. Ideal for commercial applications, this SSMA connector has a male contact gender and straight mounting style.
SF2912-60955
Sv Microwave
RF SMA/SSMA Connectors;
EZ-240-SM-X
L-com
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Material: BRASS; Panel Mount: NO; Insulator Material: POLYTETRAFLUOROETHYLENE;
132234
The Amphenol 132234 SSMA Connector features 0.14 dB insertion loss, gold termination contact finish, and threaded coupling type. With a max operating frequency of 12.4 GHz, it is ideal for RF applications requiring a 50 ohm characteristic impedance and male plug connector with crimp solder termination on cable.
142-0801-801
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Termination Type: SOLDER; Termination Contact Finish: GOLD;
73391-0083
The Molex 73391-0083 is a SSMA connector with a body length of 0.25 inch, insulation resistance of 5G ohm, and insertion loss of 0.05 dB. It is commonly used in RF SMA connectors for applications requiring a characteristic impedance of 50 ohm and max operating frequency of 18 GHz.
112-900-0631N
Winchester Interconnect
RF SMA CONNECTOR; Manufacturer Series: 112-900-0631N;
1053372-1
TE Connectivity
TE Connectivity's 1053372-1 is an RF SMA connector with threaded coupling, PTFE insulator, and gold shell finish. With a 50 ohm impedance and operating frequency up to 18 GHz, it's ideal for commercial applications requiring high reliability in temperatures ranging from -65 to 125°C. The solder termination type and stainless steel shell make it suitable for board mounting with a straight style.
2831-7388-02
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Additional Features: APPLICABLE CABLES: RG-174/U; RG-179; RG-187; RG-188; RG-316, CAPTIVE CONTACT; Panel Mount: NO;
1053091-1
TE Connectivity's 1053091-1 SSMA Connector features threaded coupling, PTFE insulator, and gold shell finish. With a 50 ohm impedance and operating frequency up to 18 GHz, it is ideal for RF applications requiring reliable commercial performance in temperatures ranging from -65°C to 125°C.
1053354-1
TE Connectivity's 1053354-1 SSMA Connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 18 GHz with a female contact gender and solder termination. The connector is designed for commercial reliability in board mounting configurations.
1051156-1
TE Connectivity's 1051156-1 SSMA Connector features 0.675" body length, 0.17 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications up to 12 GHz with RG 405 cable type, it has a threaded coupling type and TFE insulator material.
901-10385
Amphenol 901-10385 is a SSMA connector with gold shell finish, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 3 GHz, it features a female jack contact in a right-angle mounting style suitable for board and panel installations. Operating from -65°C to 165°C, this connector offers low VSWR of 1.3 for reliable commercial use.
142-0801-806
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Termination Type: SOLDER; Mating Contact Finish: GOLD (30);
BJ72
Trompeter Electronics
RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: PANEL; Total No. of Contacts: 1; Additional Features: ROHS COMPLIANT;
901-1GA200000AE
RF SMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M39012/55-3009
TE Connectivity's M39012/55-3009 is a threaded RF SMA connector with a 50 ohm characteristic impedance. It has a max operating frequency of 12.4 GHz and can be used with cable types RG 58, RG 142, and RG 223. Ideal for applications requiring high insulation resistance and low insertion loss.
Kings Electronics
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: THREADED; Termination Contact Finish: GOLD; Filter Feature: NO;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SOLDER; Contact Material: BERYLLIUM COPPER/COPPER ALLOY;
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Manufacturer Series: SMA; Coupling Type: THREADED;
Radiall S A
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Termination Contact Finish: GOLD; Characteristic Impedance: 75 ohm;
M39012/94-3003
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1414VAC; No. of Connectors: ONE;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: M39012/94; Mating Contact Finish: NOT SPECIFIED; Insulator Material: POLYTETRAFLUOROETHYLENE;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Termination Type: SOLDER; Additional Features: STANDARD: MIL-C-39012;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Filter Feature: NO; Coupling Type: THREADED;
M39012/26-0101
RF TNC CONNECTOR; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2100VAC; Body Depth: 1.108 inch; Body Diameter: .625 inch; Mounting Style: STRAIGHT;
M39012/57-3029
RF SMA CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; No. of Ports: 1; Minimum Operating Temperature: -65 Cel; Coupling Type: THREADED;
RF SMA CONNECTOR; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1; Insulation Resistance: 5000000000 ohm; Mounting Type: CABLE;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: SMA; Body or Shell Style: JACK; Filter Feature: NO;
M39012/93-3001
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SOLDER;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Panel Mount: NO; Characteristic Impedance: 50 ohm;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: STANDARD: MIL-C-39012; Mounting Type: BOARD; Mounting Style: STRAIGHT;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Termination Type: SOLDER; Mounting Style: STRAIGHT;
M39012/80B3101
RF SMA CONNECTOR; Reliability: MIL-G-45204; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Style: RIGHT ANGLE; Minimum Operating Temperature: -65 Cel;
TE Connectivity's M39012/80B3101 is a threaded RF SMA connector with a body length of 0.68 inch and depth of 0.666 inch. It has an insulation resistance of 5G ohm, operates at temperatures ranging from -65 to 165 °C, and is commonly used in MIL-C-39012 applications.
M39012/55-3030
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: SMA; Additional Features: STANDARD: MIL-C-39012; DIN Conformance: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved