Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
Median Price
$5.430
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Newark
1+ parts
$1.660
100+ parts
1k+ parts
10k+ parts
-
Chip1Stop
$4.380
Avnet
$4.997
$3.820
$3.358
Interstate Connecting
$5.208
$4.284
Heilind Electronics
$5.651
$4.502
$4.354
Mouser Electronics
$6.090
$4.330
$3.500
RS (Exports)
RS Americas
$8.750
$6.300
$4.900
Farnell
$9.290
$6.280
$5.900
Powell Electronics
$23.590
$16.510
$12.060
$11.140
DigiKey
$42.890
$30.018
$21.927
$20.255
Element14
$580.350
$479.090
$384.130
Arrow
$4.371
$3.818
Verical
$4.151
$3.952
Master Electronics
$3.870
$3.380
$3.270
Distrelec
Future Electronics
$3.970
Nova Conductors
$4.960
TME
$5.950
$5.060
Electro Sonic
$4.740
$3.700
$3.470
Vyrian
NAC Semi
$7.090
IBS Electronics
$5.005
$4.862
Sunrise Surplus Inc.
Ampacity Inc.
$3.260
Gateway Technologies
$4.590
$4.085
Singapore Electronics
$5.049
$4.695
$4.493
$4.291
Continental Prestige Electronics
$5.720
$4.510
Allen Electronics Distributors
$8.230
$6.440
Argo Parts USA
Abacus Technologies
Netroflash
$4.861
$4.712
$4.613
Other Function Circular Connectors M12A-08PMMP-SF8001 attributes and parameters. Explore more Other Function Circular Connectors devices from Amphenol
Connector Type:
Mating Contact Finish:
Contact Material:
M12A-08PMMP-SF8001 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
HDP26-24-23SN
TE Connectivity
TE Connectivity's HDP26-24-23SN is a circular connector with 23 contacts, rated at 250V and 13A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55°C to 125°C. Ideal for applications requiring a polarized, UL-rated connector with solid backshell and strain relief mounting on cables.
T3300005U
Amphenol
CIRCULAR CONNECTOR;
SLPPB35BSB2EH
The Amphenol SLPPB35BSB2EH is a circular connector with SNAP coupling, suitable for temperatures ranging from -40°C to 125°C. Featuring a solid backshell and crimp termination, it is ideal for applications requiring environment resistance. With a body depth of 1.142", this male plug connector meets UL standards and is designed for cable mounting.
AHD10-9-1939P-BP80
FGG.1B.310.CLAD62Z
Lemo Usa
FGG.1B.310.CLAD62Z by Lemo Usa is a circular connector with 0.47" body diameter and 10 contacts, suitable for cable mounting applications. It features a chrome plated brass shell, SNAP coupling type, and can operate in temperatures ranging from -55 to 250°C. Ideal for environments requiring corrosion/moisture resistance, it uses solder termination and mates with EGG.1B.310.CLL and PHG.1B.310.CLLD62Z connectors conforming to UL standards.
120-8551-102
Itt Cannon
The ITT Cannon 120-8551-102 is a SNAP circular connector with 4 contacts, copper alloy material, and silver finish. Ideal for cable mounting applications, this receptacle features an elastomeric shell and is suitable for both male and female contact genders.
2101551-1
TE Connectivity's 2101551-1 is a SNAP circular connector with 40 contacts, COPPER ALLOY shell material, and polarization key. It operates b/w -55 to 125 °C, suitable for applications requiring a polarized male plug with RND PIN-SKT contact style at 115/230VAC mains rating.
1508365
Phoenix Contact
The Phoenix Contact 1508365 is a threaded circular connector with 5 contacts. It features a solid backshell and screw termination, making it suitable for cable mounting applications. The connector is designed for female contact gender and has a socket body style.
T3374501
Amphenol T3374501 is a circular connector with bayonet coupling, nickel finish, and 5 contacts. It is used for cable mounting applications requiring solid backshell and male contact gender. The connector features metal shell material and solder termination.
SV120-8
Lumberg Connect
SV120-8 by Lumberg Connect is a threaded circular connector with 12 contacts, rated at 3A signal current. Featuring polyamide insulation and nickel-plated shell finish, it operates b/w -40 to 85°C. Ideal for commercial applications requiring high insulation resistance and VDE conformity.
XZCC12MCM40B
Schneider Electric Sa
1543236
Phoenix Contact 1543236 is a threaded circular connector with 8 gold-over-nickel contacts. It features a solid backshell, male contact gender, and plug body style. Ideal for cable mounting applications in various industries.
1-796406-2
TE Connectivity 1-796406-2 is a threaded circular connector with 37 contacts, rated for 250V. Made of polyamide66, it operates b/w -55 to 105°C. Ideal for immersion-resistant applications requiring solder termination and panel mounting.
PHN.1M.305.XLMT
PHN.1M.305.XLMT by Lemo Usa is a threaded circular connector with 5 contacts, solid backshell, fluid/vibration resistance. It uses crimp termination and aluminum alloy shell for cable mounting applications.
HDP26-24-31SE
HDP26-24-31SE by TE Connectivity is a circular connector with 31 contacts, rated for 250V and 13A. Featuring glass-filled polyamide insulator material, it operates b/w -55°C to 125°C. Ideal for applications requiring a polarized plug with solid backshell, suitable for cables with strain relief mounting.
09013130012
Franz Binder &
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
788153-2
TE Connectivity 788153-2 is a threaded circular connector with 600V rated voltage. Made of polyamide66, it operates b/w -55 to 105°C. Ideal for immersion-resistant applications, this male plug has 4 contacts and is UL certified.
1-967650-1
TE Connectivity 1-967650-1 is a threaded circular connector with glass-filled PBT insulator. It has 7 contacts, solid backshell, and operates b/w -40 to 120°C. Ideal for applications requiring a female socket contact style, such as cable mounting in environments up to 230VAC.
HDP24-24-35PE-L017
TE Connectivity's HDP24-24-35PE-L017 circular connector features GLASS FILLED POLYAMIDE insulator, 250V rated voltage, and 13A signal current. With a shell size of 24, it is ideal for applications requiring a male receptacle with 35 contacts and solid backshell mounting on panels.
BEDC906NN0000151A000
BEDC906NN0000151A000 by TE Connectivity is an EMI shielded circular connector with a rated voltage of 630V and operating temperature range from -20°C to 130°C. It features a durable zinc alloy shell, UL flammability rating of 94V-0, and is suitable for applications requiring a reliable panel-mounted receptacle connector with round pin-socket contacts.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M12A-04PMMC-SF8C15
The Amphenol M12A-04PMMC-SF8C15 is a threaded circular connector with 4 contacts, made of glass-filled polyamide insulator and zinc alloy shell. It has a body diameter of 0.634" and depth of 0.906", suitable for cable and panel mounting applications. With a temperature range from -25°C to 85°C, it is ideal for waterproof connections in various industries.
M12A-08PMMP-SF8002
M12A-03PMMS-SH8001
M12A-04PMMC-SF8B20
M12A-04PMMC-SF8B20 by Amphenol is a threaded circular connector with 4 contacts, made of glass-filled polyamide insulator and zinc alloy shell. It has a body diameter of 0.606" and depth of 0.906", suitable for cable and panel mounting applications. With a temperature range from -25°C to 85°C, it is ideal for waterproof connections in various industries.
M12A-12PMMS-SF8C15
The Amphenol M12A-12PMMS-SF8C15 is a threaded circular connector with 12 contacts, made of glass-filled polyamide insulator and zinc alloy shell. It operates b/w -25°C to 85°C, suitable for cable and panel mounting applications requiring waterproofing. The connector has a body diameter of 0.634" and depth of 0.906", finished with nickel plating.
M12A-05PMMP-SF8001
M12A-08BFFA-SL8001
M12A-03PFFS-SF8001
M12A-08BMMM-SL8D01
M12A-05PFFP-SF8001
M12A-05PMMC-SH8B15
M12A-08PFFP-SF8001
M12A-05PMMP-SF8002
M12A-08BFFM-SL8D01
M12A-04PFFP-SF8001
M12A-06PMMS-SF8C15
M12A-06PMMS-SF8C15 by Amphenol is a threaded circular connector with a body diameter of 0.634" and depth of 0.906". It has 6 contacts, a shell made of zinc alloy, and can operate in temperatures ranging from -25°C to 85°C. This connector is commonly used for cable and panel mounting applications requiring waterproof capabilities.
M12A-05PFFS-SF8001
M12A-04BFFM-SL8D01
M12A-05BMMM-SL8D01
M12A-08PMMC-SH8B15
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved