Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: 2.402 inch; Minimum Operating Temperature: -55 Cel; Termination Type: SOLDER;
Median Price
$10.710
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Powell Electronics
1+ parts
-
100+ parts
1k+ parts
$8.140
10k+ parts
Gateway Technologies
$1.000
$0.890
Singapore Electronics
$1.100
$1.023
$0.979
$0.935
Combination Line Connectors ATM15-12PD-BM04 attributes and parameters. Explore more Combination Line Connectors devices from Amphenol
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Termination Type:
Total No. of Contacts:
ATM15-12PD-BM04 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
LM358M
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
EU2B-YS303C
Idec
ROTARY SWITCH;
Tak Cheong Electronics Holdings
Gec Plessey Semiconductors
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
DTM04-08PA-EE04
TE Connectivity
TE Connectivity's DTM04-08PA-EE04 is a 2-row, 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55 to 150°C. Ideal for cable mounting applications requiring a polarized male receptacle with strain relief.
1-1418480-1
TE Connectivity 1-1418480-1, a Combination Line Connector with 7 contacts, rated at 60V/40A. Features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and UL Flammability Code 94V-0. Ideal for applications requiring a polarized connector with hybrid contact style.
282080-1
TE Connectivity's 282080-1 is a Combination Line Connector with dimensions of 0.673" x 0.366" x 1.268". It has a rated voltage of 24V, GLASS FILLED POLYAMIDE insulator material, and can operate b/w -40 to 125°C. Ideal for applications requiring a polarized connector with 2 contacts and a signal rating of 14A.
DTM06-4S-C017
TE Connectivity's DTM06-4S-C017 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55 to 125 °C, ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief.
AT04-2P-BLU
The Amphenol AT04-2P-BLU is a combination line connector with 2 contacts, rated for 13A signal current. It features a polyethylene insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-2S-BLU connectors using crimp termination.
AT06-08SA-SR2BK
The Amphenol AT06-08SA-SR2BK is a 8-contact combination line connector with POLYETHYLENE insulator. It has a rated signal current of 13A, operates b/w -55°C to 125°C, and features a plug body style. Ideal for cable mounting applications requiring reliable female contact pins in two rows.
1-1703498-1
TE Connectivity 1-1703498-1 is a Combination Line Connector with dimensions of 0.583" x 1.732" x 0.589". It has a rated voltage of 14V and can operate b/w -40°C to 130°C. With UL certification, it features male SQ PIN-SKT contacts for signal currents up to 25A in cable mounting applications.
1-2141227-1
TE Connectivity's 1-2141227-1 is a Combination Line Connector with EMI shielding, male contact gender, and round pin/socket style. With dimensions of 2.472" x 2.598" x 2.244", it operates b/w -40°C to 140°C, suitable for cable mounting applications at 115/230VAC mains connector rating.
30700-1120
Molex
The Molex 30700-1120 Combination Line Connector features a body size of 0.808" x 0.928" x 1.243", with SYNDIOTACTIC POLYSTYRENE insulator material. It has 12 contacts, rated for 7A signal current, suitable for board mounting applications. Operating temperature range is -40 to 100°C, with solder termination and male SQ PIN-SKT contact style.
180941
TE Connectivity 180941 is a Combination Line Connector with POLYAMIDE insulator. It has 3 contacts, operates b/w -40 to 105°C, and UL flammability rating of 94V-2. Used for cable mounting applications at 115/230VAC mains connector rating, featuring female contact gender in a receptacle shell style with latching option.
54201415
Aptiv
Aptiv's 54201415 is a Combination Line Connector with dimensions of 1.311" x 1.006" x 1.378". It features POLYAMIDE insulator material, 3 loaded rows, and 14 male contacts. Ideal for automotive applications requiring reliable multi-contact connections in compact spaces.
1318917-1
TE Connectivity's 1318917-1 is a Combination Line Connector with dimensions of 0.827" x 1.126" x 0.622". It has 24 contacts, rated for 12V and operating temperatures from -30 to 105°C. Used in applications requiring a polarized, UL-standard connector with female contacts for crimp termination on cables.
DT04-3P-CE02
DT04-3P-CE02 by TE Connectivity is a Combination Line Connector with dimensions of 1.758" x 0.832" x 0.973". It has a rated voltage of 250V, operating temperature range from -55 to 125°C, and UL flammability rating of 94V-0. This connector is ideal for applications requiring a polarized, male contact gender connector with crimp termination and strain relief mounting option.
DT04-8PA-L012
TE Connectivity's DT04-8PA-L012 is a 2-row combination line connector with 8 contacts, rated at 13A. Its plastic insulator and male contact gender make it suitable for cable and panel mounting applications. The compact dimensions of 2.165" x 1.389" x 1.798" offer versatility in various electronic setups.
DT04-2P-CE01
TE Connectivity's DT04-2P-CE01 is a 1.818" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and male contact gender. Ideal for applications requiring a 13A signal current in cable mounting setups.
AT06-2S-SR01BLK
The Amphenol AT06-2S-SR01BLK is a combination line connector with 2 contacts, rated for 13A signal current. It features a POLYETHYLENE insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female plug with round pin sockets.
194330013
Molex 194330013 is a 0.935" long Combination Line Connector with 2 contacts, male gender, and crimp termination. It offers high insulation resistance of 20MOhm and low contact resistance of 30mOhm. Ideal for commercial applications with operating temperatures from -40 to 120°C.
DT06-08SA-CE10
TE Connectivity's DT06-08SA-CE10 is a combination line connector with dimensions of 1.217" x 0.776" x 1.465". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used for cable mounting applications, offering a max current rating of 13A and UL flammability code of 94V-0.
HVSL800022A1H6
Amphenol's HVSL800022A1H6 is a 2.898" x 2.598" x 1.949" combination line connector with POLYETHYLENE insulator, rated for -40 to 125°C. Featuring UL94V-0 flammability code, it has 200A signal current capacity and is EN/UL compliant. Ideal for cable and panel mounting applications requiring reliable female receptacle connectors with screw termination.
DT04-12PA
TE Connectivity's DT04-12PA is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications, featuring a male contact gender and receptacle body style with strain relief option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved