Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
6.3mm AUDIO; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; Additional Features: 94V-0; Termination Type: SOLDER; Mounting Type: BOARD AND PANEL;
Median Price
$1.270
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
DigiKey
1+ parts
100+ parts
$0.842
1k+ parts
$0.687
10k+ parts
$0.623
Mouser Electronics
$1.610
$1.160
$0.893
$0.850
TTI
-
$0.990
$0.970
Nova Conductors
$0.870
Gateway Technologies
$0.774
Singapore Electronics
$0.957
$0.890
$0.851
$0.813
Advanced Electronics
$5.453
$4.962
$4.471
Andel Nordic
$28.300
$19.811
RCA Connectors ACJS-MN-3 attributes and parameters. Explore more RCA Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Configuration:
Connector Type:
Mating Contact Finish:
Contact Material:
DIN Conformance:
IEC Conformity:
MIL Conformity:
Mounting Type:
No. of Poles:
No. of Ports:
Option:
Termination Type:
ACJS-MN-3 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
755
Switchcraft
3.5mm AUDIO; Option: GENERAL PURPOSE; No. of Connectors: ONE; Configuration: 1X1 VERTICAL; Mating Contact Finish: NOT SPECIFIED; Contact Material: BRASS;
PJRAS3X1S01
Switchcraft PJRAS3X1S01 is a 1X3 HORIZONTAL RCA Connector with Dielectric Voltage of 500VAC. It features FEMALE contact gender, rated current of 2A for PHONO audio applications. The connector has COPPER ALLOY shell material and ACRYLONITRILE BUTADIENE STYRENE insulator, ideal for BOARD mounting in GENERAL PURPOSE AUDIO setups.
NC5MX-BAG
Neutrik Ag
XLR;
25
Switchcraft 25 RCA Connector features 1X1 VERTICAL configuration, suitable for GENERAL PURPOSE AUDIO. With SOLDER LUG termination and JACK body style, it offers ONE connector with 2 poles for CABLE mounting applications.
NC5FD-LX-BAG
AUDIO/RCA CONNECTOR;
M55116/4-5
Eaton Corporation
GENERAL PURPOSE AUDIO; Option: GENERAL PURPOSE; DIN Conformance: NO; MIL Conformity: YES; No. of Poles: 6; Mounting Type: CABLE AND PANEL;
NMJ6HC-S
The Neutrik Ag NMJ6HC-S is a 6.3mm AUDIO connector with BRASS contacts and AG finish. It has an Insulation Resistance of 1 Gohm, Dielectric Voltage of 1000VDC, and operates b/w -25 to 70 °C. Ideal for STEREO audio applications, this FEMALE connector offers durability with 10000 cycles and rated current of 3A.
NYS367-0
Neutrik Ag's NYS367-0 RCA Connector features 0.472" body diameter, 1000000000 ohm insulation resistance, and PHONO audio type. Ideal for commercial use in audio equipment with POLYETHYLENE insulator material, BRASS contact material, and AU finish. Suitable for panel mounting with FEMALE contact gender and solder lug termination.
SJ2-35894D-SMT-TR
Cui
Cui's SJ2-35894D-SMT-TR is a 3.5mm AUDIO jack with COPPER ALLOY contacts and SILVER finish, ideal for BOARD mounting in RCA Connectors applications. Features 4 poles, SURFACE MOUNT termination, and 1X1 HORIZONTAL configuration for versatile connectivity solutions.
150202
Lumberg Connect
The Lumberg Connect 150202 RCA Connector features a vertical 1X1 configuration with a body diameter of 0.354". It is designed for stereo audio applications, with nickel termination contact finish and glass-filled polybutylene terephthalate insulator material. This durable connector has a rated current of 1A, female contact gender, and solder lug termination type.
KLB13
KLB13 by Lumberg Connect is a 2.5mm AUDIO RCA Connector with gold-plated brass contacts, suitable for STEREO audio applications. Featuring a durable design with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and NICKEL shell finish, it offers high insulation resistance of 100000000 ohm and operates b/w -20 to 70 °C. Ideal for commercial use, this FEMALE connector has a rated current of 0.5 A and can withstand up to 1000 cycles of use.
NC3MXX-WT
236
Switchcraft 236 RCA Connector features 1X1 HORIZONTAL configuration, BRASS contact material, and TIN finish. Ideal for 6.3mm AUDIO connections in CABLE AND PANEL setups. Offers reliable signal transmission with CLAMP SOLDER LUG termination.
AC7FBJ
Amphenol
The Amphenol AC7FBJ is a 1X1 VERTICAL RCA Connector with 0.748" Body Diameter. It has a Rated Current of 5A and Contact Resistance of 3 mohm, ideal for GENERAL PURPOSE AUDIO applications. The FEMALE connector has ZINC ALLOY Shell, SOLDER Termination, and LOCKING Mounting for secure cable connections.
AG3FCRV
AG3FCRV by Amphenol is a RCA Connector with 500000000 ohm Insulation Resistance, 1500VDC Dielectric Withstanding Voltage, and 5A Rated Current. Ideal for GENERAL PURPOSE AUDIO applications due to POLARIZED HOUSING and durability of 5000 Cycles.
SJ2-35464B-SMT-TR
Cui's SJ2-35464B-SMT-TR is a 3.5mm AUDIO connector with POLYAMIDE10T insulator, rated for 1A signal current and 500VAC dielectric voltage. Ideal for board mounting in audio applications, it offers durability of 5000 cycles, right-angle mounting style, and locking option for secure connections.
TP-120
Amphenol Nexus Technologies
The Amphenol Nexus Technologies TP-120 is a 0.5" RCA connector with TIN OVER NICKEL finish. It features 4 poles and is used for PHONO audio connections. Ideal for cable mounting, this male plug connector has plastic insulator material and solder termination.
35RAPC3BH3
Switchcraft 35RAPC3BH3 is a 3.5mm audio jack with silver finish, copper alloy contacts, and horizontal configuration. Ideal for board mounting applications requiring solder termination.
NC3FXX-EMC-B
The Neutrik Ag NC3FXX-EMC-B is an XLR connector with a body diameter of 0.62", insulation resistance of 10^10 ohm, and dielectric voltage withstand of 1500VDC. Ideal for commercial applications requiring reliable signal transmission, it features a female contact gender, solder lug termination, and durability up to 1000 cycles.
412
GENERAL PURPOSE AUDIO; Option: GENERAL PURPOSE; No. of Connectors: ONE; No. of Ports: 2; JESD-609 Code: e3; Termination Contact Finish: TIN;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved