Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY; MIL Conformity: YES; Maximum Operating Temperature: 125 Cel; DIN Conformity: NO; MIL-Connector Accessory Name: CABLE CLAMP; Material: RUBBER;
Median Price
$2.380
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$1.955
100+ parts
$1.544
1k+ parts
-
10k+ parts
Heilind Electronics
$2.020
$1.595
RS Americas
$2.570
$1.930
$1.800
RS (Exports)
Element14
$2.820
Mouser Electronics
$3.400
$2.440
$2.080
$1.980
DigiKey
$3.440
$2.486
$2.114
$1.981
Newark
$3.840
$3.190
$2.530
Arrow
$1.576
Verical
Powell Electronics
$3.230
Master Electronics
$2.190
$1.710
$1.610
Chip1Stop
$1.526
TTI
$1.970
$1.420
$1.360
DF Sales Co.
$1.250
Hutch & Son
$1.450
Nova Conductors
$1.791
Vyrian
VNN
IBS Electronics
$2.959
$2.707
$2.300
Electro Sonic
$2.260
$1.460
$1.320
R&J Components
ICP Electronique
Resion
Electronic Expediters
Kallista Electronics Ltd
Technoshack Inc.
American Connector Supply Corp
ZD Integrated Circuits Inc.
Ampacity Inc.
$1.290
Aranea Global
$1.755
$1.685
Gateway Technologies
$1.593
Argo Parts USA
Continental Prestige Electronics
Singapore Electronics
$1.969
$1.831
$1.752
$1.673
Robosynatics
Mil-Spec Backshells and Connector Accessories 9779-513-20 attributes and parameters. Explore more Mil-Spec Backshells and Connector Accessories devices from Amphenol
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
MIL-Connector Accessory Name:
Maximum Operating Temperature:
Minimum Operating Temperature:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
BSS138-7-F
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Solid State Devices
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
M8504938-13N
Esterline Technologies
CONNECTOR ACCESSORY; Shell Sizes: 13; Material: ALUMINUM; DIN Conformity: NO; MIL Conformity: YES; IEC Conformity: NO;
M39029/1-101
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-C-39029; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; Insertion Tools: M81969/14-02; Contact Type: CRIMP;
M39029/58-365
Conesys
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: YES; Contact Gender: MALE; Associated Military - Specifications: MIL-DTL-38999; Terminal Type: CRIMP;
M39029/56-352
Tri-star Electronics International
CONNECTOR ACCESSORY; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; IEC Conformity: NO; DIN Conformity: NO; Alternate Contacts: 316-1616-140-L;
M85049/49-2-16W
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; MIL-Connector Accessory Name: STRAIN RELIEF; DIN Conformity: NO; Associated Military - Specifications: MIL-DTL-27599, MIL-DTL-38999; IEC Conformity: NO;
M85049/38S25N
Electro-adapter
GENERAL CONN ACCESSORY; MIL-Connector Accessory Name: STRAIN RELIEF; IEC Conformity: NO; Shell Sizes: 25; Material: ALUMINUM ALLOY; MIL Conformity: YES;
M85049/38-13N
CONNECTOR ACCESSORY; MIL Conformity: YES; IEC Conformity: NO; Material: ALUMINIUM ALLOY; Associated Military - Specifications: MIL-DTL-38999; Shell Sizes: 13;
M85049/88-19N03
TE Connectivity
TE Connectivity's M85049/88-19N03 backshell fits shell sizes 19 and F, conforms to MIL standards, and uses metal band/strap clamping. It is designed for MIL-C-38999 connectors with S617B accessory, made of aluminum for shielding applications in military equipment.
M85049/38S13N
Defense Logistics Agency
CONNECTOR ACCESSORY; Material: ALUMINUM; IEC Conformity: NO; Associated Military - Specifications: MIL-C-38999; Additional Features: ELECTROLESS NICKEL, NOT FOR NAVY USE; Backshell Clamping: BARS/STRAPS;
D38999/33F9N
CONNECTOR ACCESSORY; Material: ALUMINUM ALLOY; Shell Sizes: 9; MIL-Connector Accessory Name: COVER ITEM; IEC Conformity: NO; DIN Conformity: NO;
M39029/57-358
CONNECTOR ACCESSORY; IEC Conformity: NO; Mating Contacts: M39029/58-364; MIL Conformity: YES; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT;
M39029/77428
Souriau
CONNECTOR ACCESSORY; Material: COPPER ALLOY; IEC Conformity: NO; Insertion Tool Sources: MILITARY; Mating Contacts: M39029/76-424; Alternate Contact Sources: MILITARY;
M39029/102558
Souriau-sunbank Connection Technologies
Souriau-sunbank M39029/102558 is a Mil-Spec backshell with CRIMP REAR RELEASE contact type. It uses MIL insertion tools M81969/8-09, M81969/14-04 and mating contacts M39029/103-559 for POWER 12-14 AWG applications. Made of COPPER ALLOY, it conforms to MIL-C-38999 standards and offers 1500 cycles durability.
D38999/33W15R
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Material: ALUMINUM; IEC Conformity: NO; MIL Conformity: YES; Shell Sizes: 15;
D38999/28-4W
D38999/28-4W by Defense Logistics Agency is a MIL-Spec backshell with shell sizes 13 and 15, made of aluminum. It conforms to MIL-C-38999 standards and is compatible with MIL connector accessory S864 (JAM NUT). Ideal for military applications requiring robust connectors.
M39029/90-529
Amphenol
CONNECTOR ACCESSORY; Contact Gender: MALE; DIN Conformity: NO; IEC Conformity: NO; Mating Contacts: M39029/91-530; Terminal Type: CRIMP;
D38999/33Z13N
Spacecraft Components
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CAP ITEM; Shell Sizes: 13; Associated Military - Specifications: MIL-DTL-38999; MIL Conformity: YES; DIN Conformity: NO;
D38999/33Z17N
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; Shell Sizes: 17; MIL-Connector Accessory Name: CAP ITEM; MIL Conformity: YES;
D38999/33Z25N
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL-Connector Accessory Name: CAP ITEM; Material: ALUMINUM ALLOY; IEC Conformity: NO; Shell Sizes: 25;
M39029/30-219
CONNECTOR ACCESSORY; Contact Gender: FEMALE; MIL Conformity: YES; IEC Conformity: NO; DIN Conformity: NO; Alternate Contacts: 916-1212-092;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
9779-513-4
CONNECTOR ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: YES; Material: RUBBER; Maximum Operating Temperature: 125 Cel;
9779-513-6
CONNECTOR ACCESSORY; Material: RUBBER; DIN Conformity: NO; MIL-Connector Accessory Name: CABLE CLAMP; Maximum Operating Temperature: 125 Cel; MIL Conformity: YES;
9779-513-8
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: YES; Material: RUBBER; IEC Conformity: NO; Minimum Operating Temperature: -55 Cel;
9779-513-16
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CABLE CLAMP; Material: RUBBER; IEC Conformity: NO; Minimum Operating Temperature: -55 Cel; MIL Conformity: YES;
9779-513-10
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CABLE CLAMP; DIN Conformity: NO; Material: RUBBER; IEC Conformity: NO; Maximum Operating Temperature: 125 Cel;
9779-513-12
CONNECTOR ACCESSORY; MIL Conformity: YES; IEC Conformity: NO; Material: RUBBER; MIL-Connector Accessory Name: CABLE CLAMP; DIN Conformity: NO;
9779-513-24
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: YES; DIN Conformity: NO; MIL-Connector Accessory Name: CABLE CLAMP; Maximum Operating Temperature: 125 Cel;
9779-513-3
CONNECTOR ACCESSORY; Material: RUBBER; MIL Conformity: YES; MIL-Connector Accessory Name: CABLE CLAMP; DIN Conformity: NO; Maximum Operating Temperature: 125 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved