Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY; DIN Conformity: NO; Manufacturer Series: 97; IEC Conformity: NO; Material: ZINC ALLOY; MIL Conformity: YES;
Median Price
$10.900
Lifecycle Status
Suppliers In-Stock
38
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$8.013
100+ parts
$6.326
1k+ parts
-
10k+ parts
TTI
$8.910
$6.670
$6.090
Mouser Electronics
$10.290
$8.310
$7.060
DigiKey
$11.510
$8.313
$7.067
RS (Exports)
$11.740
$9.040
Newark
$11.850
$9.970
$9.590
RS Americas
$12.690
$9.140
$7.870
Element14
$18.160
$13.670
$12.340
Electroshield
$20.550
Master Electronics
$8.110
$6.890
ECCO
Powell Electronics
$8.640
$8.240
Verical
$9.541
Freelance Electronics
$5.787
$6.077
$5.729
DF Sales Co.
$6.400
Bristol Electronics
$10.107
$4.379
$4.144
American Microsemiconductor Inc.
$15.980
Vyrian
IBS Electronics
$11.374
$10.659
ACDS - Activité Composants Distribution Service
Dan-Mar Components
American Connector Supply Corp
VNN
Inventory MP
R&J Components
Van Brakel Electronic
EMSNET
ICP Electronique
Electronic Expediters
Nova Conductors
ZD Integrated Circuits Inc.
A&K Electronics
Rotakorn
MISTER SPROCKETS
Beckwith Electronics
Mil-Aero Solutions, Inc.
Electronics Depot
Ampacity Inc.
$5.290
Gateway Technologies
$7.000
$6.230
Singapore Electronics
$7.700
$7.161
$6.853
$6.544
Allen Electronics Distributors
$11.670
Continental Prestige Electronics
Glotronic Ltd.
Aranea Global
Argo Parts USA
4 Star Electronics, Inc. (Excess)
Mil-Spec Backshells and Connector Accessories 97-3057-12 attributes and parameters. Explore more Mil-Spec Backshells and Connector Accessories devices from Amphenol
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Manufacturer Series:
Material:
MIL-Connector Accessory Name:
Shell Sizes:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
Diotec Semiconductor Ag
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
Semicoa
Promax-johnton
International Semiconductor
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CNP058360
Amphenol
Amphenol's CNP058360 is a MIL-Spec backshell with CRIMP terminals, conforming to MIL standards. It features M39029/58-360 alternate contacts and CNS057354 mating contacts for MALE gender. Ideal for military applications requiring reliable connector accessories.
M39029/28-211
Tri-star Electronics International
CONNECTOR ACCESSORY; MIL-Connector Accessory: CONTACT; Associated Military - Specifications: MIL-C-38999; Contact Gender: MALE; Alternate Contact Functions: 12 AWG; MIL-Connector Accessory Name: CONTACT;
M39029/57-358
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 031-1123-016; Contact Gender: FEMALE; MIL Conformity: YES; MIL-Connector Accessory Name: CONTACT; IEC Conformity: NO;
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; Alternate Contact Functions: POWER 12-14 AWG, SHIELDED, 1500 CYCLES; Removal Tool Sources: MILITARY; National Stock Number (NSN): 5999010716709; Removal Tools: M81969/8-10, M81969/14-04; Mating Contacts: M39029/27-210, M39029/75-416;
M39029/90529
Souriau
CONNECTOR ACCESSORY; Rated Current: 46 A; Insertion Tools: M81969/14-12; Mounting Style: STRAIGHT; Removal Tools: M81969/14-12; IEC Conformity: NO;
M39029/30-221
CONNECTOR ACCESSORY; Alternate Contacts: M5100-033-0004; Associated Military - Specifications: MIL-DTL-5015; Contact Type: CRIMP REAR RELEASE; Alternate Contact Sources: AMPHENOL; Contact Gender: FEMALE;
M85049/88-19W03
Defense Logistics Agency
CONNECTOR ACCESSORY; Shell Sizes: 19, F; MIL Conformity: YES; Material: ALUMINUM; MIL-Connector Accessory: S617B; DIN Conformity: NO;
M85049/38S25N
CIRCULAR CONN ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Shell Sizes: 25; Material: ALUMINUM ALLOY; IEC Conformity: NO; MIL Conformity: YES;
D38999/33W25R
CONNECTOR ACCESSORY; National Stock Number (NSN): 5935012805470; Shell Sizes: 25, J; MIL-Connector Accessory Name: PROTECTIVE COVER; DIN Conformity: NO; MIL Conformity: YES;
M39029/30-222
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; Mating Contacts: M39029/29-216; Contact Type: CRIMP REAR RELEASE; National Stock Number (NSN): 5999011456243;
D38999/33W11N
Glenair
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL-Connector Accessory Name: COVER ITEM; Material: ALUMINUM ALLOY; MIL Conformity: YES; DIN Conformity: NO;
M39029/31-240
TE Connectivity
TE Connectivity's M39029/31-240 is a Mil-Spec backshell with CRIMP contact type for 10-24 AWG wires. It conforms to MIL-DTL-26482 and MIL-DTL-26500 standards, rated at 7.5A current. Compatible with insertion tools like 2844656-1, it's ideal for military applications requiring reliable male contacts.
M85049/1811W03
Joslyn Sunbank Company
CONNECTOR ACCESSORY; Shell Sizes: 11; Associated Backshell Military - Specifications: MIL-C-85049; IEC Conformity: NO; MIL Conformity: YES; MIL-Connector Accessory Name: BACKSHELL;
TXR40AC90-2008AI
TE Connectivity's TXR40AC90-2008AI backshell fits MIL-DTL-38999 Series III, IV connectors with shell size 21; G. Made of aluminum alloy, it supports wire up to 0 AWG and cable entry from 0.25" to 0.4". Operating b/w -65°C to 200°C, it conforms to MIL standards for military applications.
D38999/33W13R
Esterline Technologies
CONNECTOR ACCESSORY; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; Shell Sizes: 13; IEC Conformity: NO; MIL-Connector Accessory Name: PROTECTIVE COVER;
M85049/90-23W03
CONNECTOR ACCESSORY; Material: ALUMINUM; MIL Conformity: YES; Manufacturer Series: M85049/90-23W03; MIL-Connector Accessory Name: SHIELDING ACCESSORY; Associated Military - Specifications: MIL-C-38999;
M39029/5-116
CONNECTOR ACCESSORY; National Stock Number (NSN): 5999010453132; Insertion Tool Sources: MILITARY; Removal Tools: M81969/8-08, M81969/14-03; Mating Contacts: M39029/4-111; IEC Conformity: NO;
D38999/33W19N
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999 SERIES III; Material: ALUMINUM ALLOY; Shell Sizes: 19; IEC Conformity: NO; MIL Conformity: YES;
CONNECTOR ACCESSORY; Additional Features: STANDARD: MIL-C-38999; IEC Conformity: NO; Contact Gender: FEMALE; Associated Military - Specifications: MIL-DTL-38999; Terminal Type: CRIMP;
D38999/33W17N
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Additional Features: STANDARD: MIL-DTL-38999; Shell Sizes: 17; Material: ALUMINUM;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
97-3057-1004-1
CONNECTOR ACCESSORY; Shell Sizes: 10SL, 12S; MIL-Connector Accessory Name: CABLE CLAMP; DIN Conformity: NO; Material: ZINC; IEC Conformity: NO;
97-3057-1007-1(621)
CONNECTOR ACCESSORY; MIL Conformity: YES; MIL-Connector Accessory Name: CLAMPING ITEM; DIN Conformity: NO; Shell Sizes: 12SL; 14; 14S; IEC Conformity: NO;
97-3057-1010(621)
Amphenol 97-3057-1010(621) is a Mil-Spec backshell with shell size 18, MIL conformity, and zinc alloy material. It can operate b/w -55°C to 125°C and is used as a clamping item in military connectors for secure connections.
97-3057-1010
CIRCULAR CONN ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; MIL-Connector Accessory Name: CLAMPING ITEM; Associated Military - Specifications: MIL-DTL-5015; MIL Conformity: YES;
97-3057-1010(639)
CIRCULAR CONN ACCESSORY; Associated Military - Specifications: MIL-DTL-5015; Shell Sizes: 18; MIL-Connector Accessory Name: CLAMPING ITEM; MIL Conformity: YES; IEC Conformity: NO;
97-3057-1012-1-621
CONNECTOR ACCESSORY; Manufacturer Series: 97;
97-3057-1008-1
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-5015; MIL Conformity: YES; Material: ZINC ALLOY; Shell Sizes: 16; 16S; MIL-Connector Accessory Name: CLAMPING ITEM;
97-3057-1010(689)
CONNECTOR ACCESSORY; IEC Conformity: NO; Maximum Operating Temperature: 125 Cel; Shell Sizes: 18; Minimum Operating Temperature: -55 Cel; DIN Conformity: NO;
97-3057-1007-1(689)
97-3057-1004-1(621)
97-3057-1007(621)
CIRCULAR CONN ACCESSORY; DIN Conformity: NO; MIL Conformity: YES; IEC Conformity: NO; Shell Sizes: 12SL, 14, 14S; MIL-Connector Accessory Name: CLAMPING ITEM;
97-3057-1012(621)
CIRCULAR CONN ACCESSORY; DIN Conformity: NO; MIL-Connector Accessory Name: CLAMPING ITEM; IEC Conformity: NO; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-5015;
97-3057-1007
CIRCULAR CONN ACCESSORY; MIL-Connector Accessory Name: CLAMPING ITEM; DIN Conformity: NO; Associated Military - Specifications: MIL-DTL-5015; IEC Conformity: NO; MIL Conformity: YES;
97-3057-1012
CIRCULAR CONN ACCESSORY; DIN Conformity: NO; Shell Sizes: 20, 22; MIL Conformity: YES; IEC Conformity: NO; MIL-Connector Accessory Name: CLAMPING ITEM;
97-3057-1016-1
CONNECTOR ACCESSORY; MIL Conformity: YES; Shell Sizes: 24, 28; Material: ZINC ALLOY; DIN Conformity: NO; IEC Conformity: NO;
97-3057-1016
CIRCULAR CONN ACCESSORY; IEC Conformity: NO; Shell Sizes: 24, 28; Associated Military - Specifications: MIL-DTL-5015; MIL Conformity: YES; DIN Conformity: NO;
97-3057-1008
CIRCULAR CONN ACCESSORY; Associated Military - Specifications: MIL-DTL-5015; MIL Conformity: YES; MIL-Connector Accessory Name: CLAMPING ITEM; DIN Conformity: NO; IEC Conformity: NO;
97-3057-1012(689)
CIRCULAR CONN ACCESSORY; Associated Military - Specifications: MIL-DTL-5015; MIL Conformity: YES; Shell Sizes: 20, 22; IEC Conformity: NO; DIN Conformity: NO;
97-3057-1008(621)
CIRCULAR CONN ACCESSORY; Shell Sizes: 16, 16S; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-5015;
97-3057-1007(689)
CIRCULAR CONN ACCESSORY; DIN Conformity: NO; Associated Military - Specifications: MIL-DTL-5015; MIL-Connector Accessory Name: CLAMPING ITEM; Shell Sizes: 12SL, 14, 14S; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved