Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF N CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.3; Mounting Type: CABLE;
Median Price
$23.693
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
< 1k
Master Electronics
1+ parts
$23.310
100+ parts
$18.520
1k+ parts
$16.820
10k+ parts
-
Verical
$24.076
R&J Components
American Connector Supply Corp
Sunrise Surplus Inc.
First Choice Components Inc.
Gateway Technologies
$2.000
$1.780
Singapore Electronics
$2.200
$2.046
$1.958
$1.870
N-Type Connectors 82-209-1006 attributes and parameters. Explore more N-Type Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Color:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
82-209-1006 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Shenzhen Socay Electronics
Weitron Technology
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
Changzhou Galaxy Century Microelectronics
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
EZ-600-NMH-RA-X
Times Microwave Systems
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; Voltage Standing Wave Ratio: 1.35; Additional Features: STANDARD: IEC 60169-16; INSERTION LOSS CAPTURED FOR 3GHZ;
EZ-240-NMH-RA-X
EZ-240-NMH-RA-X by Times Microwave Systems is an RF N connector with 50 ohm impedance, gold termination finish, and 1.35 VSWR. Ideal for LMR240 cables, it operates from -55 to 125°C, withstands up to 1000VAC, and offers low insertion loss of -0.245 dB for applications requiring durability and high frequency performance up to 6 GHz.
TC-240-NMH-X
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1050VAC; Cable Types: LMR240; Panel Mount: NO;
M39012/02-0502
Delta Electronics Manufacturing
Delta Electronics M39012/02-0502 N-Type Connector features threaded coupling, gold finish, and 50 ohm impedance. Ideal for RF applications up to 11 GHz, it is MIL compliant with PTFE insulator for reliable performance in cable installations. Female crimp termination ensures secure connections in high-frequency environments.
7351
Ssb-electronic
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 10 GHz; Body Depth: 2.425 inch; Insulator Material: POLYTETRAFLUORO ETHYLENE;
138-4694-001
Bel Fuse
Bel Fuse 138-4694-001 N-Type Connector features 5000000000 ohm Insulation Resistance, 0.05 dB Insertion Loss, and 2100VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 18 GHz with RG-402 cable type, this connector offers reliable performance in commercial settings with a durability of 500 cycles.
EZ-240-NMH-X
Infinite Electronics International
EZ-240-NMH-X by Infinite Electronics International is an N-Type Connector with gold termination contact finish. It features a threaded coupling type and beryllium copper contact material. Ideal for RF applications, this connector has a crimp termination type and is designed for male contacts on cables.
172100
The Amphenol 172100 N-Type Connector features a Dielectric Withstanding Voltage of 3500VAC, Coupling Type THREADED, and Insulator Material POLYTETRAFLUOROETHYLENE. Ideal for RF applications with a max operating frequency of 11 GHz, this connector offers durability with 500 cycles and operates in temperatures ranging from -65 to 165 °C.
138-4416-007
Cinch Connectivity Solutions
RF N CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 3500VAC; Termination Type: CRIMP; Total No. of Contacts: 1; Manufacturer Series: 138;
172106
Amphenol 172106 N-Type Connector features gold termination, threaded coupling, and PTFE insulator. With 50 ohm impedance and 1.3 VSWR, it operates up to 11 GHz. Ideal for RF applications requiring reliable signal transmission in cable and panel setups.
NTPE-P-C-HN-ST-C10
Samtec
Samtec NTPE-P-C-HN-ST-C10 is an N-Type RF connector with 50 ohm impedance, gold over nickel finish, and threaded coupling. Ideal for cable mounting applications requiring male crimp solder termination. Made of polytetrafluoroethylene insulator material for reliable performance in various RF communication systems.
R161.277.000
Radiall S A
R161.277.000 N-Type Connector by Radiall S A features a body diameter of 0.62", insulation resistance of 5G ohm, and insertion loss of 0.17 dB. Ideal for RF applications up to 11 GHz, this threaded connector with gold over nickel finish is MIL compliant and suitable for cable and panel mounting in commercial settings.
UG-594B/U
Kings Electronics
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Type: CABLE; Coupling Type: THREADED;
1-1337630-0
TE Connectivity
TE Connectivity 1-1337630-0 is an N-Type Connector with 0.787" body diameter, 0.3 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications up to 11 GHz, it features a threaded coupling type and crimp termination on RG-214/U cables.
53S101-115N5
Rosenberger Hochfrequenztechnik & Kg
53S101-115N5 by Rosenberger Hochfrequenztechnik & Kg is an N-Type Connector with 0.05 dB Insertion Loss, 1.22 VSWR, and 11 GHz Max Operating Frequency. Ideal for RF applications requiring threaded coupling, PTFE insulator, and 50 ohm impedance in cable mounting setups.
R161.168.000
R161.168.000 N-Type Connector by Radiall S A features a body diameter of 0.867", insertion loss of 0.33 dB, and dielectric voltage withstand of 2500VAC. Ideal for RF applications up to 11 GHz, this connector has a characteristic impedance of 50 ohm and gold termination finish for durability in commercial settings.
172148
The Amphenol 172148 is an N-Type Connector with threaded coupling, gold/silver finish, and PTFE insulator. It has a VSWR of 1.3, operates up to 11 GHz at 50 ohm impedance. Ideal for RF applications requiring high-frequency transmission with low signal loss and secure connections.
23_N-50-0-1/133_NE
Huber+suhner Ag
23_N-50-0-1/133_NE by Huber+suhner Ag is an RF N CONNECTOR with a characteristic impedance of 50 ohm. It features a gold (Au) termination contact finish, PFA/PTFE insulator material, and brass shell material. Ideal for applications requiring durability up to 500 cycles, operating temperatures ranging from -65 to 165 °C, and a max frequency of 11 GHz.
24_N-50-7-31/133_NY
24_N-50-7-31/133_NY by Huber+suhner Ag is an RF N CONNECTOR with threaded coupling, suitable for panel mounting. With a max operating frequency of 6 GHz and VSWR of 1.13, it offers durability up to 500 cycles. This connector has a characteristic impedance of 50 ohm and can be terminated via crimping for applications requiring high-frequency signal transmission.
R161277000
Radiall S A R161277000 N-Type Connector features 0.17 dB insertion loss, 1.08 VSWR, and 11 GHz max operating frequency. Ideal for RF applications requiring threaded coupling, gold termination finish with nickel barrier, and 50 ohm impedance. Suitable for panel mount installations with MIL conformity.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved