Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF BNC CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Mounting Type: CABLE; Body or Shell Style: PLUG;
Median Price
$6.663
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
DigiKey
1+ parts
$9.590
100+ parts
$6.929
1k+ parts
$5.890
10k+ parts
-
Master Electronics
$6.000
$5.180
$5.110
Verical
FDH Electronics
$4.182
$3.382
$3.151
Freelance Electronics
$4.888
DF Sales Co.
$10.240
TEDSS.com
$12.800
$4.990
ES Components
American Connector Supply Corp
ComSIT Distribution GmbH
ZD Integrated Circuits Inc.
Prism Electronics
MISTER SPROCKETS
Van Brakel Electronic
Elcom Components
Electronic Supply
Bristol Electronics
Resion
Gateway Technologies
$10.000
$8.900
Singapore Electronics
$11.000
$10.230
$9.790
$9.349
4 Star Electronics, Inc. (Excess)
Perfect Parts
BNC Connectors 68175 attributes and parameters. Explore more BNC Connectors devices from Amphenol
Body Depth:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Contact Gender:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
68175 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
5120-01-487-3823, 5120014873823, 5935-00-762-3857, 5935007623857, 5950-00-119-2641, 5950001192641, 6115-14-355-5185, 6115143555185, 7490-00-116-2811, 7490001162811
NIIN
014873823, 007623857, 001192641, 143555185, 001162811
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
1N4148WS
Weitron Technology
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
R142334700
Radiall S A
Radiall S A's R142334700 is a BNC Connector with Bayonet coupling, PTFE insulator, and 75 ohm impedance. Ideal for RF applications up to 6 GHz, it features panel mount capability and crimp termination for female contacts in straight mounting style.
31-221
Amphenol 31-221 BNC Connector has 0.2 dB insertion loss, 2100VAC dielectric voltage, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with nickel finish, PTFE insulator, and brass shell. Suitable for commercial use in cable and panel mounting with female coax contact.
6274127-1
Tyco Electronics Amp
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 6274127; Body or Shell Style: JACK; Mating Contact Finish: GOLD (30);
UBJ27
Bel Fuse
Bel Fuse's UBJ27 RF BNC Connector features 75 ohm impedance, 4 GHz frequency, and nickel finish. Ideal for commercial applications requiring reliable female jack connectors with solder termination for panel mounting.
31-5
The Amphenol 31-5 BNC Connector features low insertion loss of 0.2 dB and high voltage standing wave ratio of 1.3, ideal for RF applications up to 4 GHz. With bayonet coupling and silver termination, this hermetic connector is designed for a characteristic impedance of 50 ohm in straight cable mounting configurations.
2555
Ddk
2555 by Ddk is a BNC Connector with Bayonet coupling, PTFE insulator, and RF connector type. It has a VSWR of 1.3, 50 ohm impedance, male contact gender, plug body style, and right-angle mounting. Ideal for RF applications requiring secure connections with low signal loss in cable installations.
B6251G3-NPP3G-75T
Amphenol's B6251G3-NPP3G-75T is a RF BNC connector with bayonet coupling, polypropylene insulator, and 75 ohm impedance. It features solder termination, female contact gender, and jack body style for board mounting applications.
5413558-1
TE Connectivity
TE Connectivity's 5413558-1 BNC Connector features a body diameter of 0.414", insulation resistance of 5G ohm, and max operating frequency of 2GHz. Ideal for RF applications, this right-angle jack connector with bayonet coupling is durable with a zinc alloy shell and polymethylpentene insulator.
5227222-2
TE Connectivity's 5227222-2 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and termination contact finish in Tin. Ideal for RF applications with a characteristic impedance of 50 ohm, this connector has a max operating frequency of 4 GHz and durability up to 500 cycles.
13-28
SPC TECHNOLOGY/ MULTICOMP
13-28 BNC Connector by Spc Technology/Multicomp features gold-plated brass contacts, bayonet coupling, and a 50 ohm impedance. Ideal for RF applications up to 4 GHz, it is panel mountable with solder termination for high-frequency signal transmission.
R316405000
R316405000 by Radiall S A is a BNC Connector with Bayonet coupling, 50 ohm impedance, and 2 GHz operating frequency. It features silver termination finish for RF applications. Ideal for panel and cable mounting in high-frequency systems requiring low VSWR.
5221123-2
TE Connectivity's 5221123-2 BNC Connector features 50 ohm impedance, glass-filled PBT insulator, and 4 GHz operating frequency. Ideal for RF applications with a durability of 500 cycles, solder termination, and zinc alloy shell material.
R141082161
Radiall S A's R141082161 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it has a bayonet coupling type and gold-plated contacts with nickel barrier for reliable signal transmission in cable installations.
M39012/20-0101
Kings Electronics
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Filter Feature: NO; Insulator Material: POLYTETRAFLUOROETHYLENE;
112514
Amphenol 112514 is a BNC connector with bayonet coupling, acetal insulator, and male contact gender. It is used for RF applications with cable mounting and crimp termination in straight plug style.
2-330061-1
TE Connectivity's 2-330061-1 BNC Connector features Bayonet coupling, PTFE insulator, and silver shell finish. Ideal for RF applications with 50 ohm impedance, RG-174/U cable type, and crimp termination. Supports up to 2.5 GHz frequency with a VSWR of 1.35 for commercial reliability.
M39012/18-0220
Delta Electronics Manufacturing
Delta Electronics M39012/18-0220 BNC Connector features gold termination, bayonet coupling, and MIL conformity. Ideal for RF applications, it is a panel mount connector with female contact gender and straight mounting style.
1274572-1
TE Connectivity's 1274572-1 BNC Connector features a body length of 0.355", dielectric voltage withstand of 1000VAC, and operating frequency up to 2 GHz. Ideal for RF applications, this connector has a characteristic impedance of 75 ohm, durability of 500 cycles, and operates b/w -40 to 85°C.
B6551A1-NT3G-50
Amphenol B6551A1-NT3G-50 is a RF BNC connector with gold over nickel finish, bayonet coupling, and PTFE insulator. Ideal for panel mounting applications requiring solder termination, featuring female contact gender and jack body style.
112515
Amphenol 112515 is an RF BNC connector with bayonet coupling, PTFE insulator, and 50 ohm impedance. Ideal for board mounting applications, featuring solder termination and female contact gender in a straight jack style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved