Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
Median Price
$21.060
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
< 1k
Arrow
1+ parts
$0.744
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$4.770
Farnell
$14.760
$13.540
Newark
$27.140
$26.500
$25.310
Element14
$38.030
$29.800
$27.340
Gateway Technologies
$6.000
$5.339
Singapore Electronics
$6.600
$6.137
$5.873
$5.609
Continental Prestige Electronics
$15.600
$11.840
Other Function RF Connectors 431-129J-52S attributes and parameters. Explore more Other Function RF Connectors devices from Amphenol
Connector Type:
Mating Contact Finish:
Contact Material:
431-129J-52S Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Leshan Radio
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
KYOCERA AVX
Vishay Telefunken
Littelfuse
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
292-101P-52S
Amphenol
Amphenol 292-101P-52S is a threaded RF connector with gold finish, suitable for cables. Features include 50 ohm impedance, 40 GHz frequency, and low VSWR of 1.3. Ideal for high-frequency applications requiring reliable signal transmission.
CUC-COX-J1M-A/LBS
Phoenix Contact
RF CONNECTOR;
222153
Amphenol 222153 RF F Connector has gold contact finish, threaded coupling type, and PTFE insulator material. It is used in commercial applications with RG-59 cable types for 1 GHz frequency at temperatures ranging from -40 to 60°C.
7325-1512-060
Radiall S A
Radiall S A 7325-1512-060 RF SSLB Connector features 0.187" body diameter, 0.3 dB insertion loss, and gold termination. Ideal for board mounting in applications requiring 50 ohm impedance up to 12.4 GHz frequency range. MIL conformity ensures reliable performance in extreme temperatures from -65°C to 165°C.
R222.M80.500
Radiall S A R222.M80.500 RF SMP Connector has 0.16 dB insertion loss, 1.32 VSWR, and operates up to 6 GHz. With a body length of 0.256", it is ideal for right angle cable mounting applications in RF systems requiring a 50 ohm characteristic impedance.
PSMP-MSLD-PCSEM
PSMP-MSLD-PCSEM by Amphenol is a RF SMP CONNECTOR with a characteristic impedance of 50 ohm. It has an insertion loss of 0.09 dB and can withstand a max operating frequency of 10 GHz. This connector is commonly used in commercial applications requiring high insulation resistance and surface mount termination.
145-0701-601
Cinch Connectivity Solutions
RF SMK CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (50); Panel Mount: YES; Insertion Loss: .37 dB;
19S144-40ML5
Rosenberger Hochfrequenztechnik & Kg
19S144-40ML5 RF connector by Rosenberger features a body length, diameter, and width of 0.236 inch each. With an insertion loss of 0.51 dB, it offers a max operating frequency of 26.5 GHz. Ideal for board mounting applications in high-frequency environments with a characteristic impedance of 50 ohm.
2391
Pomona Electronics
Pomona Electronics 2391 RF Connector features gold finish, bayonet coupling, and brass contact material. With 50 ohm impedance, it is ideal for solder termination in male-female connections. Suitable for straight mounting applications in various RF devices.
925-144J-51PT
RF SMPM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
DIN7A-PP-C-GF-ST-CA3
Samtec
Samtec DIN7A-PP-C-GF-ST-CA3 is a 1.0/2.3 DIN RF connector with 75 ohm impedance, gold over nickel termination, and snap coupling. Ideal for cable mounting applications, it has a body diameter of 0.325" and operates b/w -65°C to 125°C temperatures.
142-1000-003
Vertiv
RF CONNECTOR; Option: HERMETIC; Contact Gender: MALE; MIL Conformity: NO; Characteristic Impedance: 50 ohm; Panel Mount: NO;
28504
Ddk
RF CONNECTOR; IEC Conformity: NO; Manufacturer Series: 27CP; MIL Conformity: NO; DIN Conformance: NO; Body or Shell Style: PLUG;
3-1532006-6
TE Connectivity's 3-1532006-6 RF connector features SLIDE ON coupling, 50 ohm impedance, and CRIMP termination. Ideal for cable mounting applications, this MALE plug connector is designed for RF connections in various electronic devices.
1-1532006-1
TE Connectivity 1-1532006-1 RF Connector features threaded coupling, 50 ohm impedance, and solder termination. Ideal for panel and cable mounting applications in RF systems requiring female jack connectors.
302114
Amphenol 302114 RF SMP Connector features gold finish, 50 ohm impedance, and operates up to 26.5 GHz. Ideal for board mounting applications with male contact gender and jack body style. Made of beryllium copper shell material, it withstands temperatures from -65 to 165 °C.
R222.900.310
R222.900.310 RF SMP Connector by Radiall S A features a body length of 0.154", insertion loss of 0.42 dB, and dielectric voltage of 750VAC. Ideal for applications requiring a durable right-angle plug with a characteristic impedance of 50 ohm, suitable for RG-196 cable termination at frequencies up to 12.4 GHz.
19K202-270L5-NM
RF SMP CONNECTOR;
700
Connecting Devices
RF CONNECTOR; Manufacturer Series: 7MM;
3211-40119
Sv Microwave
RF SMPM CONNECTOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved